Can the Hydraulic hose collet 1SC, carbon steel, type Z1TC be installed without machining on 1SC rubber hydraulic hoses using specified D1/D2/D3 dimensions?

Yes. The Hydraulic hose collet 1SC, carbon steel, type Z1TC is designed for installation on 1SC rubber hydraulic hoses without any machining. Using the specified dimensions (D1 = outer diameter, D2 = inner diameter, D3 = lock diameter), you verify that the hose outer and inner diameters fall within the colletâs D1/D2 tolerances and that the lock diameter D3 matches the clamping range. Made of galvanized carbon steel, the Z1TC clamping sleeve clamps directly onto the hose . no cutting, turning or other machining of the hose is required . provided the hose dimensions correspond to the published D1/D2/D3 values.

Is the Hydraulic hose collet 1SC, carbon steel, type Z1TC compatible with 1SC rubber hydraulic hoses without machining using listed D1/D2/D3?

Yes. Hydraulic hose collet 1SC, carbon steel, type Z1TC is compatible with 1SC rubber hydraulic hoses without machining, provided the hose outer diameter (D1), hose inner diameter (D2) and the collet lock diameter (D3) listed for the Z1TC match the hose dimensions. The Z1TC is specified for rubber hydraulic hoses type 1SC and its installation requires no machining; compatibility depends on D1 (outer), D2 (inner) and D3 (lock) being within the required tolerances. If the hose D1/D2 correspond to the Z1TCâs D1/D2 and the lock diameter D3 secures the hose, the collet will fit and function correctly.

Does the Hydraulic hose collet 1SC, carbon steel, type Z1TC require additional sealing or adhesives when installed without machining?

Hydraulic hose collet 1SC, carbon steel, type Z1TC does not require additional sealing or adhesives when installed as intended (installation - no machining). The Z1TC clamping sleeve is designed to secure rubber hydraulic hoses type 1SC by mechanical clamping: D1 (outer diameter), D2 (inner diameter) and D3 (lock diameter) define the fit and locking action. Made of carbon steel and galvanized, the sleeve provides corrosion resistance and a reliable grip without the need for sealants. However, correct performance depends on: - Using the exact sleeve size matching the hose dimensions (D1/D2/D3). - Proper installation technique per manufacturer instructions to ensure full engagement of the lock mechanism. - Ensuring the hose end is clean, undamaged and free of contaminants before assembly. If the application involves extreme pressures, aggressive fluids, or conditions outside standard specifications, consult the manufacturer or engineering guidelines; in such cases additional sealing methods or alternative fittings may be recommended.

Hydraulic hose collet 1SC, carbon steel, type Z1TC

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Z1TC clamping sleeve for rubber hydraulic hoses type 1SC. Installation – no machining. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – lock diameter. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-Z1TC-04	Hose sleeve 1SC 1/4"	6	-	In stock	Enquiry
TI-Z1TC-05	Hose sleeve 1SC 5/16"	8	-	In stock	Enquiry
TI-Z1TC-06	Hose sleeve 1SC 3/8"	10	-	In stock	Enquiry
TI-Z1TC-08	Hose sleeve 1SC 1/2"	12	-	In stock	Enquiry
TI-Z1TC-10	Hose sleeve 1SC 5/8"	16	-	In stock	Enquiry
TI-Z1TC-12	Sleeve for hose 1SC 3/4"	20	-	In stock	Enquiry
TI-Z1TC-16	Hose sleeve 1SC 1	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Z1TC clamping sleeve for rubber hydraulic hoses type 1SC. Installation – no machining. Diameter D1 [mm] – outer diameter. Diameter D2 [mm] – inner diameter. Diameter D3 [mm] – lock diameter. Material: carbon steel, galvanized.