Is the DKOR 90Â° hydraulic end, type ZBW220, carbon steel compatible with standard crimping sleeves for hydraulic and industrial hoses?

Yes. The DKOR 90Â° hydraulic end, type ZBW220, carbon steel is compatible with standard crimping sleeves for hydraulic and industrial hoses. Its design is explicitly intended for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the specific hose type. It has a regular hydraulic tail (type Z) and crimp-friendly geometry, internal BSP thread with nut, and Oâring sealing on a 60Â° cone (DKOR). Ensure you select a crimping sleeve that matches the hose construction, size, and pressure rating, and follow the hose and fitting manufacturerâs crimping specifications and tooling settings for a proper, pressure-rated assembly.

Can DKOR 90Â° hydraulic end, type ZBW220, carbon steel be used with hoses requiring BSP internal threads and O-ring 60Â° cone sealing?

Yes. DKOR 90Â° hydraulic end, type ZBW220, carbon steel can be used with hoses requiring BSP internal threads and O-ring 60Â° cone sealing. The description specifies an internal BSP thread with nut and O-ring sealing on a 60Â° cone (DKOR), 90Â° angled, designed for crimping with a suitable sleeve and made of carbon steel, galvanized-matching your hose requirements. Ensure the crimping sleeve and hose type are compatible and verify thread size and pressure ratings before assembly.

Does DKOR 90Â° hydraulic end, type ZBW220, carbon steel require a specific crimping diameter for certain hose sizes?

Yes. DKOR 90Â° hydraulic end, type ZBW220, carbon steel requires a specific crimping diameter matched to the hose size and crimping sleeve used. The product description states it is "designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type," which implies you must use the correct crimping die/profile and final crimp diameter specified by the hose and sleeve manufacturer. The exact crimp diameter depends on: - the hose inner/outer diameter and reinforcement type, - the crimping sleeve dimensions/material, - the crimping machine and die set (manufacturerâs recommendations). Do not rely on a generic diameter. consult the hose and sleeve technical data sheets or supplier for the required crimp diameter and crimping procedure for the specific hose series you are using with the DKOR 90Â° hydraulic end, type ZBW220, carbon steel.

DKOR 90° hydraulic end, type ZBW220, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	60 / 120

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, sealing with an O-ring on a 60° cone (DKOR), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW220-04-04	End fitting 90° G 1/4" BSP, hose 1/4", cone 60°, o-ring	6	-	In stock	Enquiry
TI-ZBW220-06-04	End fitting 90° G 3/8" BSP hose 1/4", cone 60°, o-ring	6	-	In stock	Enquiry
TI-ZBW220-06-06	End fitting 90° G 3/8" BSP, hose 3/8", cone 60°, O-ring	10	-	In stock	Enquiry
TI-ZBW220-08-06	End. 90° G 1/2" BSP hose 3/8", cone 60°, o-ring	10	-	In stock	Enquiry
TI-ZBW220-08-08	End fitting 90° G 1/2" BSP, hose 1/2", cone 60°, o-ring	12	-	In stock	Enquiry
TI-ZBW220-12-10	End fitting 90° G 3/4" BSP, hose 5/8", cone 60°, o-ring	16	-	In stock	Enquiry
TI-ZBW220-12-12	End fitting 90° G 3/4" BSP, hose 3/4", cone 60°, o-ring	20	-	In stock	Enquiry
TI-ZBW220-16-12	End. 90° G 1" BSP, hose 3/4", cone 60°, o-ring	20	-	In stock	Enquiry
TI-ZBW220-16-16	End fitting 90° G1" BSP, hose 1", cone 60°, o-ring	25	-	In stock	Enquiry
TI-ZBW220-20-16	End fitting 90° G1 1/4" BSP, hose 1", cone 60°, o-ring	25	-	In stock	Enquiry
TI-ZBW220-20-20	Elbow 90° G 1.1/4" BSP, hose 1.1/4", cone 60°, o-ring	32	-	In stock	Enquiry
TI-ZBW220-24-24	End fitting 90° GW 1.1/2" BSP, hose 1.1/2", cone 60°, o-ring	38	-	In stock	Enquiry
TI-ZBW220-32-32	End fitting 90° GW 2" BSP, hose 2", cone 60°, o-ring	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, sealing with an O-ring on a 60° cone (DKOR), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.