Is the ORFS hydraulic end, type ZOZ110, carbon steel compatible with crimping sleeves for standard industrial hose assemblies?

Yes. The ORFS hydraulic end, type ZOZ110, carbon steel is compatible with crimping sleeves for standard industrial hose assemblies. The product description explicitly states it is "designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose." It features a regular hydraulic tail (type Z) for hose insertion, external UNF thread, and an ORFS face seal with Oâring; material is carbon steel, galvanized. Ensure you use a crimping sleeve matched to the hose construction (diameter, reinforcement layers, and crimp profile) and follow the hose and fitting manufacturerâs assembly and crimping specifications for correct and safe installation.

Can ORFS hydraulic end, type ZOZ110, carbon steel be used with hoses requiring a face-seal O-ring and external UNF thread?

Yes. ORFS hydraulic end, type ZOZ110, carbon steel can be used with hoses requiring a face-seal O-ring and external UNF thread. It is specifically described as a standard hydraulic end (type Z) with an external UNF thread and an ORFS face seal, designed for crimping into hydraulic and industrial hoses using a compatible crimping sleeve. Material (carbon steel, galvanized) is appropriate for typical hydraulic applications, provided pressure ratings and hose compatibility (inner diameter, crimp sleeve specification, and working pressure) match the hose and system requirements.

Can ORFS hydraulic end, type ZOZ110, carbon steel be crimped to high-pressure hydraulic hose assemblies?

Yes. An ORFS hydraulic end, type ZOZ110, carbon steel can be crimped to high-pressure hydraulic hose assemblies when the hose assembly and crimping sleeve are compatible with the fitting type. The product description specifies it is a standard hydraulic end (type Z â with a regular hydraulic "tail" for hose), with external UNF thread and an ORFS face seal with Oâring, and it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Key requirements to ensure a proper, safe crimp: - Use a crimping sleeve specifically sized and rated for the hose manufacturerâs specification and for a Z-type (hose tail) fitting. - Verify the hose is rated for the intended working pressure and is compatible with the carbon steel, galvanized fitting and ORFS face seal. - Use the correct crimping machine and die set for the sleeve diameter and crimp profile recommended by the hose/sleeve manufacturer. - Ensure the Oâring and face seal are installed correctly and undamaged; ORFS relies on the face seal, so proper tightening torque on the external UNF thread and correct alignment are critical. - Follow hose and fitting manufacturer assembly instructions, hose industry standards (e.g., EN, ISO, SAE as applicable), and pressure-test the assembled hose to the required test pressure before service. If any doubt exists about sleeve compatibility, crimp dimensions, or pressure ratings, consult the hose and sleeve manufacturers or a qualified hydraulic hose assembly technician before crimping.

ORFS hydraulic end, type ZOZ110, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with external UNF thread, face seal with O-ring (ORFS). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZOZ110-09-04	End. ORFS GZ 9/16", hose 1/4"	6	-	In stock	Enquiry
TI-ZOZ110-11-04	End. ORFS GZ 11/16", hose 1/4"	6	-	In stock	Enquiry
TI-ZOZ110-11-05	End. ORFS GZ 11/16", hose 5/16"	8	-	In stock	Enquiry
TI-ZOZ110-11-06	End. ORFS GZ 11/16", hose 3/8"	10	-	In stock	Enquiry
TI-ZOZ110-13-06	End. ORFS GZ 13/16", hose 3/8"	10	-	In stock	Enquiry
TI-ZOZ110-13-08	End. ORFS GZ 13/16", hose 1/2"	12	-	In stock	Enquiry
TI-ZOZ110-16-08	End. ORFS GZ 1", hose 1/2"	12	-	In stock	Enquiry
TI-ZOZ110-16-10	End. ORFS GZ 1", hose 5/8"	16	-	In stock	Enquiry
TI-ZOZ110-19-08	End. ORFS GZ 1.3/16", hose 1/2"	12	-	In stock	Enquiry
TI-ZOZ110-19-10	End. ORFS GZ 1.3/16", hose 5/8"	16	-	In stock	Enquiry
TI-ZOZ110-19-12	End. ORFS GZ 1.3/16", hose 3/4"	20	-	In stock	Enquiry
TI-ZOZ110-23-12	End. ORFS GZ 1.7/16", hose 3/4"	20	-	In stock	Enquiry
TI-ZOZ110-23-16	End. ORFS GZ 1.7/16", hose 1"	25	-	In stock	Enquiry
TI-ZOZ110-27-20	End. ORFS GZ 1.11/16", hose 1.1/4"	32	-	In stock	Enquiry
TI-ZOZ110-32-24	End. ORFS GZ 2", hose 1.1/2"	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with external UNF thread, face seal with O-ring (ORFS). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.