Is the Angle tee "Y", adjustable with male thread, type R25 suitable for both vacuum and compressed-air applications up to 12 bar?

Yes. The Angle tee "Y", adjustable with male thread, type R25 is suitable for both vacuum and compressed-air applications up to 12 bar. Its specifications list a working pressure of 12 bar and working media as vacuum and air. The component is made of plastic, uses NBR sealing, and is rated for operation from â20Â°C to +60Â°C, allowing safe use in typical pneumatic and vacuum systems within those limits. Ensure compatibility with your systemâs temperature range, chemical exposure, and required thread/pipe dimensions before installation.

Can Angle tee "Y", adjustable with male thread, type R25 maintain sealing after repeated disassembly and reassembly?

Yes. Angle tee "Y", adjustable with male thread, type R25 Format is designed for multiple assemblies; it is easy and quick to use without loss of sealing on mechanical and pneumatic sides. Made of plastic with NBR seals, rated to 12 bar, suitable for vacuum and air, and operable from â20Â°C to +60Â°C, it maintains sealing after repeated disassembly and reassembly when used within these specified conditions.

Does Angle tee "Y", adjustable with male thread, type R25 require special tools for installation or removal?

Angle tee "Y", adjustable with male thread, type R25 does not require special tools for installation or removal. Designed for quick, repeatable assemblies in pneumatic systems, its plastic construction and external male thread allow hand-tightening and use of common wrenches if needed. Sealing is provided by NBR, maintaining mechanical and pneumatic tightness during multiple connections; no proprietary tools or special equipment are specified. For best results, follow standard practices: ensure threads and sealing surfaces are clean, avoid overtightening (to prevent plastic damage), and, if using tools, use an appropriately sized adjustable or open-end wrench with a soft jaw or protection to avoid marring the plastic.

Angle tee “Y”, adjustable with male thread, type R25

All products, Push-in fittings/

Additional information

Material	B – brass (bronze)

Angle “Y” adjustable tee with external thread, type R25, intended for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2L25001	Adjustable Y-branch connector RL25, 2 x hose 4 mm, GZ M5, plastic	-	16	In stock	Enquiry
MW-2L25002	Adjustable Y-branch connector RL25, 2 x hose 4 mm, GZ M7, plastic	-	16	In stock	Enquiry
MW-2L25003	Adjustable angle Y tee connector RL25, 2 x hose 4 mm, GZ BSP 1/8", plastic	-	16	In stock	Enquiry
MW-2L25004	Adjustable angle Y tee connector RL25, 2 x hose 6 mm, GZ BSP 1/8", plastic	-	16	In stock	Enquiry
MW-2L25005	Adjustable Y-angle tee connector RL25, 2 x hose 6 mm, GZ BSP 1/4", plastic	-	16	In stock	Enquiry
MW-2L25008	Adjustable Y-angle tee connector RL25, 2 x hose 8 mm, GZ BSP 1/4", plastic	-	16	In stock	Enquiry
MW-2L25009	Adjustable Y-branch connector RL25, 2 x hose 8 mm, GZ BSP 3/8", plastic	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Angle “Y” adjustable tee with external thread, type R25, intended for connecting pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.