Is the Cap for metric hoses, type PPFM suitable for repeated use at 10 bar and within the 0Â°C to +60Â°C operating temperature range?

Yes. Cap for metric hoses, type PPFM Format is suitable for repeated use at 10 bar within the 0Â°C to +60Â°C operating temperature range. The product specification lists a working pressure of 10 bar and an operating temperature range from 0Â°C to +60Â°C, and the material (plastic) and design as a blind plug for flexible pneumatic hoses in metric dimensions (series S, type PPFM) indicate it is intended for regular connection/disconnection under those conditions. Ensure compatibility with your specific hose dimensions and check for wear or damage over time to maintain a reliable seal.

Can Cap for metric hoses, type PPFM withstand vacuum down to 0.99 bar for storage or transport applications?

Yes. Cap for metric hoses, type PPFM can withstand vacuum down to 0.99 bar for storage or transport. The product specification lists Vacuum: 0.99 bar, Material: plastic, Working pressure: 10 bar and an operating temperature range of 0Â°C to +60Â°C, so it is rated for that level of vacuum under those conditions.

Does the Cap for metric hoses, type PPFM resist common chemicals and oils used in pneumatic systems?

Cap for metric hoses, type PPFM Format is made of plastic and is intended as a blind plug for flexible pneumatic hoses. The product data provided lists working pressure (10 bar), vacuum rating (0.99 bar) and operating temperature range (0Â°C to +60Â°C), but does not specify chemical or oil resistance. Therefore you cannot assume broad resistance to common pneumatic system chemicals and oils based on the available description. Chemical compatibility depends on the specific plastic formulation used (e.g., polyethylene, polypropylene, PVC, nylon, elastomers), which is not given. Some plastics tolerate oils and hydraulic fluids well; others swell, soften or degrade when exposed to hydrocarbons, solvents, or synthetic lubricants. If chemical/oil resistance is required, request from the supplier or manufacturer: - exact plastic material and grade, - available chemical resistance data or compatibility charts, - any testing or certification for exposure to the specific fluids used in your system (oils, lubricants, cleaning agents). As an interim precaution, avoid prolonged contact with aggressive oils/solvents and consider using a cap made of a material with known compatibility (e.g., specific engineering plastics, Viton/FKM, or metal) if exposure is likely.

Cap for hoses metric, type PPFM

All products, Push-in fittings/

Additional information

Material	P – material (plastic)

Cap Intended for flexible hoses pneumatic in sizes metric, series S, type PPFM. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SH-PPFM-04	Cap PPFM for 4 mm hose	-	10	In stock	Enquiry
SH-PPFM-06	Cap PPFM for 6 mm hose	-	10	In stock	Enquiry
SH-PPFM-08	Cap PPFM for 8 mm hose	-	10	In stock	Enquiry
SH-PPFM-10	Cap PPFM for 10 mm hose	-	10	In stock	Enquiry
SH-PPFM-12	Cap PPFM for 12 mm hose	-	10	In stock	Enquiry
SH-PPFM-16	Cap PPFM for 16 mm hose	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Cap Intended for flexible hoses pneumatic in sizes metric, series S, type PPFM. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C.