Can the T plug tee through, type R22, maintain sealing under repeated assembly and disassembly at 12 bar pressure?

Yes. The "T" plug tee through, type R22 Format is specified for repeated assemblies without loss of sealing on both mechanical and pneumatic sides. Key factors supporting its ability to maintain sealing at 12 bar: - Rated working pressure: 12 bar . the connector is designed to operate at that pressure. - Sealing material: NBR (nitrile) . suitable for air and vacuum and provides reliable repeated seal performance when used within its temperature and chemical limits. - Intended use: described as easy and quick to use for multiple assemblies without loss of sealing, indicating the design tolerates repeated connection/disconnection cycles. - Operating temperature range: -20Â°C to +60Â°C . as long as service conditions stay within this range, NBR elastomer properties remain acceptable. Limitations/conditions to ensure performance: - Avoid exposure to fluids or chemicals incompatible with NBR. - Ensure connectors and mating parts are clean and undamaged; avoid excessive mechanical wear or improper assembly technique. - Do not exceed the specified temperature range or 12 bar working pressure. Conclusion: When used within the stated material, pressure (12 bar), temperature, and application limits, the "T" plug tee through, type R22 Format should maintain sealing during repeated assembly and disassembly.

How does the "T" plug tee through, type R22, perform with different hose materials at pressures up to 12 bar?

The "T" plug tee through, type R22 performs well across common pneumatic hose materials up to its rated 12 bar when used within specified conditions. Its plastic body and NBR sealing provide reliable air- and vacuum-tight connections without loss of sealing during multiple assemblies. With polyurethane (PU) and polyethylene (PE) hoses the connector offers excellent flexibility, low friction insertion, and durable sealing up to 12 bar. With rubber (NBR or EPDM) hoses it maintains good seal compatibility and resilience across the operating temperature range (-20Â°C to +60Â°C). With reinforced or high-stiffness hoses the mechanical grip may be less forgiving-proper hose end preparation and correct insertion depth are important to preserve the seal at higher pressures. Avoid aggressive fluids or temperatures outside the specified range to prevent seal degradation.

Is the "T" plug tee through, type R22, compatible with vacuum service at -20Â°C to +60Â°C?

Yes. The "T" plug tee through, type R22 is specified for vacuum service and for use with air, with an operating temperature range of -20Â°C to +60Â°C. Constructed of plastic with NBR sealing and rated for working pressure up to 12 bar, it is suitable for vacuum applications within the stated temperature limits.

Tee plug-in “T” through-flow, type R22

All products, Push-in fittings/

Additional information

Material	P – material (plastic)

Tee plug-in “T” through-flow, type R22, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2022002	Tee fitting T R22 hose 5 mm, plastic	-	12	In stock	Enquiry
MW-2022005	Tee fitting T RL22 hose 10 mm, plastic	-	12	In stock	Enquiry
MW-2022006	Tee fitting T RL22 hose 12 mm, plastic	-	12	In stock	Enquiry
MW-2L22001	Tee fitting T RL22 hose 4 mm, plastic	-	12	In stock	Enquiry
MW-2L22003	Tee fitting T RL22 hose 6 mm, plastic	-	12	In stock	Enquiry
MW-2L22004	Tee fitting T RL22 hose 8 mm, plastic	-	12	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Tee plug-in “T” through-flow, type R22, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.