Does the Complete double BANJO plug connector, type R56 maintain sealing integrity under repeated assembly cycles at 16 bar pressure?

Yes. The Complete double BANJO plug connector, type R56 is specified and designed for repeated assemblies without loss of sealing on both the mechanical and pneumatic sides. With a working pressure rating of 16 bar, NBR (nitrile) seals, nickelâplated brass construction and an operating temperature range of â20Â°C to +80Â°C, the product description indicates it maintains sealing integrity under multiple assembly cycles at 16 bar for typical vacuum and air media. Proper performance assumes use within the stated temperature and media limits and correct installation practices; extreme abrasion, chemical exposure outside NBR compatibility, or damage during handling could still impair sealing.

Is the Complete double BANJO plug connector, type R56 suitable for use with vacuum and compressed air at temperatures down to -20Â°C?

Yes. The Complete double BANJO plug connector, type R56 is suitable for use with vacuum and compressed air at temperatures down to -20Â°C. Its specifications list working medium as vacuum and air, an operating temperature range from -20Â°C to +80Â°C, working pressure up to 16 bar, and NBR sealing, with a nickel-plated brass body ensuring mechanical and pneumatic sealing at the stated conditions.

Can the Complete double BANJO plug connector, type R56 be used with fluids other than air and vacuum (compatibility)?

Complete double BANJO plug connector, type R56 is specified and certified for use with vacuum and air only. Its constructionânickel-plated brass body and NBR (nitrile) sealsâdetermines chemical and temperature compatibility limits: working pressure up to 16 bar and operating temperature from â20Â°C to +80Â°C. Using fluids other than air or vacuum is not recommended without specific chemical compatibility verification. NBR seals resist hydrocarbons (oils, fuels) and many mineral oils reasonably well but have poor resistance to ketones, some esters, strong acids/alkalis, brake fluids, aromatic hydrocarbons and many solvents. Nickel-plated brass is generally corrosion-resistant but can be attacked by ammonia, some acids, or highly chlorinated/fluorinated media. If you intend to use Complete double BANJO plug connector, type R56 with other gases or liquids, you must: - Verify NBR compatibility with the specific fluid and its temperature range. - Confirm brass/nickel plating compatibility with the fluid (corrosivity, galvanic issues). - Ensure pressure and dynamic conditions do not exceed 16 bar or the connectorâs mechanical/pneumatic sealing capability. For aggressive chemicals, high temperatures outside â20Â°Câ¦+80Â°C, or critical sealing requirements, choose a connector with compatible elastomer (e.g., FKM, EPDM, PTFE) and materials rated for the fluid, or consult the manufacturer for suitability and testing.

A complete coupling push-in double BANJO, type R56

All products, Push-in fittings/

Additional information

Material	B – brass (bronze)

A complete coupling push-in double BANJO, type R56, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2L56001	Fitting double BANJO kompletna RL56 hose 4 mm, M5 male	-	16	In stock	Enquiry
MW-2L56002	Fitting double BANJO kompletna RL56 hose 4 mm, 1/8" BSP male	-	16	In stock	Enquiry
MW-2L56007	Fitting double BANJO kompletna RL56 hose 6 mm, M5 male	-	16	In stock	Enquiry
MW-2L56008	Fitting double BANJO kompletna RL56 hose 6 mm, 1/8" BSP male	-	16	In stock	Enquiry
MW-2L56009	Fitting double BANJO kompletna RL56 hose 6 mm, 1/4" BSP male	-	16	In stock	Enquiry
MW-2L56010	Fitting double BANJO kompletna RL56 hose 8 mm, 1/8" BSP male	-	16	In stock	Enquiry
MW-2L56011	Fitting double BANJO kompletna RL56 hose 8 mm, 1/4" BSP male	-	16	In stock	Enquiry
MW-2L56012	Fitting double BANJO kompletna RL56 hose 8 mm, 3/8" BSP male	-	16	In stock	Enquiry
MW-2L56013	Fitting double BANJO kompletna RL56 hose 10 mm, 1/4" BSP male	-	16	In stock	Enquiry
MW-2L56014	Fitting double BANJO kompletna RL56 hose 10 mm, 3/8" BSP male	-	16	In stock	Enquiry
MW-2L56016	Fitting double BANJO kompletna RL56 hose 12 mm, 3/8" BSP male	-	16	In stock	Enquiry
MW-2L56017	Fitting double BANJO kompletna RL56 hose 12 mm, 1/2" BSP male	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A complete coupling push-in double BANJO, type R56, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.