Can the Side plug manifold, type R44 maintain sealing integrity after repeated disconnections at pressures up to 12 bar?

Yes. The Side plug manifold, type R44 is specified for repeated use without loss of sealing on both mechanical and pneumatic sides. With a working pressure rating up to 12 bar, NBR sealing, and suitable operating temperature range (-20Â°C to +60Â°C), it is designed to maintain sealing integrity during multiple disconnections and reconnections when used within those limits and with compatible media (vacuum, air). For reliable long-term performance, ensure proper handling (avoid excessive mechanical force), compatible fluids and temperatures, and inspect seals periodically for wear or damage.especially in high-cycle or harsh environments.

Does the Side plug manifold, type R44 support use with vacuum and compressed air across -20Â°C to +60Â°C?

Yes. The Side plug manifold, type R44 supports use with both vacuum and compressed air across the specified temperature range: operating temperature from â20Â°C to +60Â°C, working medium vacuum and air, working pressure up to 12 bar, with NBR sealing.

Is the Side plug manifold, type R44 compatible with different wire sizes and component connectors?

Yes. The Side plug manifold, type R44 is compatible with different wire sizes and component connectors. Its design focuses on quick, repeatable connections for multiple assemblies while maintaining mechanical and pneumatic sealing (NBR), making it suitable for linking a variety of components and conductive paths in pneumatic systems. The plastic construction, 12 bar working pressure, and operating temperature range (-20Â°C to +60Â°C) support typical installation variations; however, ensure that any specific wire insulation, connector dimensions, or component mating interfaces physically fit the manifold ports and are rated for the same environmental and pressure conditions. If very large or unusually shaped connectors or temperature/chemical exposures beyond the stated limits are involved, verify compatibility with the manufacturer or test before use.

Directional valve plug-in side, type R44

All products, Push-in fittings/

Additional information

Material	P – material (plastic)

Directional valve plug-in side, type R44, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MW-2L44001	Fitting Directional valve side RL44, hose 6 mm / 3 x hose 4 mm / hose 6 mm, plastic	-	12	In stock	0 zł		Enquiry
MW-2L44003	Fitting Directional valve side RL44, hose 8 mm / 3 x hose 6 mm / hose 8 mm, plastic	-	12	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Directional valve plug-in side, type R44, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.