Is the TUBOMATIC H25 press brake suitable for crimping all standard EC type ferrules within the 10â25 mm diameter range?

Yes. The TUBOMATIC H25 press brake is suitable for crimping all standard EC-type ferrules within the 10â25 mm diameter range. It is expressly designed for EC-type ferrules on low-pressure hoses and comes with three sets of interchangeable jaws (each set has six crimping segments) covering 10â13 mm, 13â16 mm and 16â25 mm diameters, matching the stated crimping diameter range of 10â25 mm. Ensure you select the correct jaw set and follow the manufacturerâs setup and crimping procedures for consistent, compliant crimps.

Can the TUBOMATIC H25 press brake handle crimping of hoses with non-EC or custom ferrules outside standard EC specs?

The TUBOMATIC H25 press brake is designed specifically for crimping low-pressure hoses with EC type ferrules within a crimping diameter range of 10â25 mm, using three matched jaw sets (10â13 mm, 13â16 mm, 16â25 mm). Using non-EC or custom ferrules outside standard EC specifications is not recommended: the machineâs jaws and die geometry are optimized for EC ferrules, so nonstandard ferrules may not seat correctly, produce unreliable crimps, damage tooling, or compromise hose assembly safety. If you must use custom ferrules, consult the manufacturer about compatible jaws or custom tooling and perform thorough testing and quality verification before any production use.

Does the TUBOMATIC H25 press brake include spare sets of crimping segments or replaceable jaws?

Yes. The TUBOMATIC H25 press brake includes three spare sets of crimping jaws (each set consisting of 6 crimping segments) sized: 10â13 mm, 13â16 mm and 16â25 mm, covering the crimping diameter range 10â25 mm.

TUBOMATIC H25 press brake

Additional information

TUBOMATIC H25 crimping press with manual drive, designed for crimping low-pressure hoses with EC type ferrules. Easy and lightweight device, equipped with three sets (of 6 crimping segments each) of jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. Crimping diameter range: 10 ÷ 25 mm.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
OP-TUB-H25	TUBOMATIC H25 clamping press	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

TUBOMATIC H25 crimping press with manual drive, designed for crimping low-pressure hoses with EC type ferrules. Easy and lightweight device, equipped with three sets (of 6 crimping segments each) of jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. Crimping diameter range: 10 ÷ 25 mm.