Is the FINN-POWER P20 HP press brake operable without electricity or compressed air and suitable for on-site repairs?

Yes. The FINN-POWER P20 HP press brake with manual hydraulic pump drive is operable without electricity or compressed air, making it suitable for on-site repairs. Its compact, lightweight design is intended for repair workshops, service points, and technical vehicles, allowing repairs at the site of failure. It includes a mechanical indicator (control pins) for achieving the correct clamping diameter and a head that can be set in two positions (90Â° rotation). Note: jaws are interchangeable and must be ordered separately to cover specific clamping diameter ranges (e.g., sets FP-20-10 to FP-20-54 for 10â61 mm).

Can the FINN-POWER P20 HP press brakeâs head be rotated 90Â° and how does the mechanical indicator ensure correct clamping diameter?

Yes - the FINN-POWER P20 HP press brake head can be rotated 90Â° (set in two positions), allowing flexible orientation for site repairs. The unit includes a mechanical indicator using control pins to ensure the correct clamping diameter: by positioning the pins the operator verifies and sets the desired jaw spacing, guaranteeing accurate clamping for the selected interchangeable jaw set. Remember jaw sets are ordered separately to cover specific diameter ranges.

Does the FINN-POWER P20 HP press brake support interchangeable jaw sets for different clamping diameters?

Yes. The FINN-POWER P20 HP press brake supports interchangeable jaw sets for different clamping diameters. All FINN-POWER clamping presses are designed to work with interchangeable jaw sets (ordered separately). For example, to cover a clamping diameter range from 10 to 61 mm you must order 12 sets of standard jaws (FP-20-10 to FP-20-54). The P20 HP also includes a mechanical indicator for achieving the clamping diameter and the head can be set in two positions (90Â° rotation) for added versatility.

Crimping press FINN-POWER P20 HP

Additional information

Crimping press P20 HP with manual drive pump hydraulic, works everywhere tam, where not has access for stream ani compressed air, a compact The design and small weight allows on performing repairs in space failure. has mechanical indicator (pins control) reaching diameter crimp and possibility settings the head in two positions (rotation o 90⁰). Intended for workshops repair, points service, vehicles technical. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
FP-P20HP	Prasa clamping FINN POWER type P20 HP	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Crimping press P20 HP with manual drive pump hydraulic, works everywhere tam, where not has access for stream ani compressed air, a compact The design and small weight allows on performing repairs in space failure. has mechanical indicator (pins control) reaching diameter crimp and possibility settings the head in two positions (rotation o 90⁰). Intended for workshops repair, points service, vehicles technical. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54.