Is the FINN-POWER P20 HP press brake operable without electricity or compressed air and suitable for on-site repairs?

Yes. The FINN-POWER P20 HP press brake with manual hydraulic pump drive is operable without electricity or compressed air, making it suitable for on-site repairs. Its compact, lightweight design is intended for repair workshops, service points, and technical vehicles, allowing repairs at the site of failure. It includes a mechanical indicator (control pins) for achieving the correct clamping diameter and a head that can be set in two positions (90Â° rotation). Note: jaws are interchangeable and must be ordered separately to cover specific clamping diameter ranges (e.g., sets FP-20-10 to FP-20-54 for 10â61 mm).

Can the FINN-POWER P20 HP press brakeâs head be rotated 90Â° and how does the mechanical indicator ensure correct clamping diameter?

Yes - the FINN-POWER P20 HP press brake head can be rotated 90Â° (set in two positions), allowing flexible orientation for site repairs. The unit includes a mechanical indicator using control pins to ensure the correct clamping diameter: by positioning the pins the operator verifies and sets the desired jaw spacing, guaranteeing accurate clamping for the selected interchangeable jaw set. Remember jaw sets are ordered separately to cover specific diameter ranges.

Does the FINN-POWER P20 HP press brake support interchangeable jaw sets for different clamping diameters?

Yes. The FINN-POWER P20 HP press brake supports interchangeable jaw sets for different clamping diameters. All FINN-POWER clamping presses are designed to work with interchangeable jaw sets (ordered separately). For example, to cover a clamping diameter range from 10 to 61 mm you must order 12 sets of standard jaws (FP-20-10 to FP-20-54). The P20 HP also includes a mechanical indicator for achieving the clamping diameter and the head can be set in two positions (90Â° rotation) for added versatility.

FINN-POWER P20 HP press brake

Additional information

The P20 HP hydraulic press with manual pump drive is suitable for use where there is no access to electricity or compressed air, and its compact design and low weight allow for repairs at the site of failure. It features a mechanical indicator (control pins) for achieving the clamping diameter and the ability to set the head in two positions (90° rotation). It is intended for repair workshops, service points, and technical vehicles. All FINN-POWER clamping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a clamping diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 must be ordered.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
FP-P20HP	FINN POWER type P20 HP crimping press	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

The P20 HP hydraulic press with manual pump drive is suitable for use where there is no access to electricity or compressed air, and its compact design and low weight allow for repairs at the site of failure. It features a mechanical indicator (control pins) for achieving the clamping diameter and the ability to set the head in two positions (90° rotation). It is intended for repair workshops, service points, and technical vehicles. All FINN-POWER clamping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a clamping diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 must be ordered.