Is the CAMLOCK connector envelope gasket, PTFE/NBR suitable for continuous use between -40Â°C and +93Â°C in the female (socket) part?

Yes. The CAMLOCK connector envelope gasket, PTFE/NBR is specified with an operating temperature range from -40Â°C to +93Â°C, so it is suitable for continuous use in the female (socket) part within that temperature range. Ensure that chemical compatibility, pressure, mechanical fit and any application-specific stresses also meet PTFE/NBR performance limits for reliable long-term service.

Can the CAMLOCK connector envelope gasket, PTFE/NBR withstand chemical exposure in the female (socket) part?

Yes. The CAMLOCK connector envelope gasket, PTFE/NBR offers good chemical resistance in the female (socket) part for many media. PTFE (polytetrafluoroethylene) provides excellent broad-spectrum chemical inertness and low permeability, while the NBR (nitrile) backing or overmold gives sealing elasticity and fuel/oil resistance. Together they perform well across the stated operating temperature range (â40Â°C to +93Â°C). Limitations: NBR is vulnerable to strong acids, ketones, and certain polar solvents (e.g., acetone, MEK) and may swell with some hydrocarbons at elevated temperatures. PTFE resists most chemicals but can be mechanically limited if the NBR is attacked. For aggressive chemicals, prolonged exposure, high concentrations, elevated temperatures, or cyclic conditions, verify compatibility with the specific chemical (concentration, temperature, exposure time) and consider full PTFE or alternative elastomers if needed.

Does the CAMLOCK connector envelope gasket, PTFE/NBR meet industry standards for sealing in the socket?

Yes. the CAMLOCK connector envelope gasket, PTFE/NBR is suitable for meeting common industry sealing requirements in the socket, with some qualifications. Reasons: - Materials: PTFE provides excellent chemical resistance and low permeability; the bonded NBR (nitrile rubber) layer supplies elasticity and compression recovery needed to form a reliable seal against the mating surfaces. - Temperature range: â40Â°C to +93Â°C covers typical industrial service conditions for many fluid transfer and general-purpose applications (hydraulic, fuel, water, most oils and many chemicals). This range supports maintaining seal integrity without hardening at low temperatures or excessive softening at moderate high temperatures. - Performance traits: The combination delivers good sealing under mechanical compression, resistance to swelling in many media, and durability against wear and extrusion when properly sized and installed. Limitations / considerations: - Chemical compatibility: While PTFE is broadly compatible, NBR has limited resistance to strong acids, ketones, and some aggressive solvents. For exposure to such fluids, verify compatibility or choose a different elastomer (e.g., EPDM, FKM). - Pressure and mechanical conditions: Seal performance also depends on groove design, surface finish, compression set, and operating pressure. For high-pressure, pulsating, or abrasive services, verify gasket size, cross-section and installation meet application-specific standards. - Standards: The description does not cite specific standards (e.g., MIL, ISO, or API). If formal certification or compliance is required, request test data or certification from the manufacturer confirming conformity to the applicable industry standard. Conclusion: For general industrial sealing in CAMLOCK sockets across the stated temperature range and for many common fluids, the CAMLOCK connector envelope gasket, PTFE/NBR will meet sealing expectations. For aggressive chemicals, extreme pressures, or when formal standard certification is required, validate chemical compatibility, mechanical specification and request manufacturer test/certification.

Gasket envelope-type coupling CAMLOCK, PTFE/NBR

Additional information

Maximum operating temperature [°C]	93
Minimum operating temperature [°C]	-40
Standard length [m]	60 / 120

Gasket envelope-type for part female (socket) coupling CAMLOCK. Material: PTFE/NBR. Operating temperature: from -40°C to +93°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-G-050-T	Gasket PTFE/Buna-N 1/2"	-	-	In stock	Enquiry
AC-G-050-TX	Gasket PTFE/Buna-N 1/2"	-	-	In stock	Enquiry
AC-G-075-T	Gasket PTFE/Buna-N 3/4"	-	-	In stock	Enquiry
AC-G-075-TX	Gasket PTFE/Buna-N 3/4"	-	-	In stock	Enquiry
AC-G-100-T	Gasket PTFE/Buna-N 1"	-	-	In stock	Enquiry
AC-G-100-TX	Gasket PTFE/Buna-N 1"	-	-	In stock	Enquiry
AC-G-125-T	Gasket PTFE/Buna-N 1.1/4"	-	-	In stock	Enquiry
AC-G-125-TX	Gasket PTFE/Buna-N 1.1/4"	-	-	In stock	Enquiry
AC-G-150-T	Gasket PTFE/Buna-N 1.1/2"	-	-	In stock	Enquiry
AC-G-150-TX	Gasket PTFE/Buna-N 1.1/2"	-	-	In stock	Enquiry
AC-G-200-T	Gasket PTFE/Buna-N 2"	-	-	In stock	Enquiry
AC-G-200-TX	Gasket PTFE/Buna-N 2"	-	-	In stock	Enquiry
AC-G-250-T	Gasket PTFE/Buna-N 2.1/2"	-	-	In stock	Enquiry
AC-G-250-TX	Gasket PTFE/Buna-N 2.1/2"	-	-	In stock	Enquiry
AC-G-300-T	Gasket PTFE/Buna-N 3"	-	-	In stock	Enquiry
AC-G-300-TX	Gasket PTFE/Buna-N 3"	-	-	In stock	Enquiry
AC-G-400-T	Gasket PTFE/Buna-N 4"	-	-	In stock	Enquiry
AC-G-500-T	Gasket PTFE/Buna-N 5"	-	-	In stock	Enquiry
AC-G-600-T	Gasket PTFE/Buna-N 6"	-	-	In stock	Enquiry