Is the Pin for CAMLOCK connector, AISI 304 steel, type P compatible with all CAMLOCK couplers and sizes?

No.Pin for CAMLOCK connector, AISI 304 steel, type P is not universally compatible with all CAMLOCK couplers and sizes. Compatibility depends on the specific camlock size (e.g., 1/2", 3/4", 1", 1Â½", 2", 3", 4") and the corresponding groove and pin dimensions of the coupler. Pins are manufactured to match particular camlock size standards and may differ in diameter, length and head shape. Using a mismatched pin can lead to improper locking, leakage or mechanical failure. To ensure compatibility: - Match the Pin for CAMLOCK connector, AISI 304 steel, type P to the exact camlock size and standard (e.g., MIL-C-27487 or ISO 9001 compliant dimensions) of the coupler. - Verify pin diameter and length against the couplerâs pin groove and hole spacing. - Confirm material suitability (AISI 304 is corrosion-resistant but may not be adequate for all chemical or temperature environments). If unsure, consult the coupler manufacturerâs specifications or supplier technical data to select the correct Pin for CAMLOCK connector, AISI 304 steel, type P for your coupler size.

Does the Pin for CAMLOCK connector, AISI 304 steel, type P require specific maintenance to prevent corrosion?

Yes. Pin for CAMLOCK connector, AISI 304 steel, type P is made from AISI 304 stainless steel, which offers good general corrosion resistance, but it is not fully maintenanceâfree in all environments. To prevent corrosion and ensure reliable operation: - Rinse or wipe regularly to remove salts, chemicals, or debris after exposure to marine, chlorinated, acidic or salty conditions. - Inspect periodically for pitting, discoloration or surface deposits; remove light rust or stains with a stainlessâsteel cleaner or mild abrasive suitable for 304. - Avoid contact with dissimilar metals that can cause galvanic corrosion; use insulating washers or proper fittings if needed. - Store dry and ventilated when not in use; avoid prolonged exposure to standing water or aggressive chemicals. - If used in highly corrosive environments, consider upgrading to higherâgrade stainless steel (e.g., 316) or apply protective coatings. Following these simple maintenance steps will significantly reduce corrosion risk and extend the service life of Pin for CAMLOCK connector, AISI 304 steel, type P.

Can the Pin for CAMLOCK connector, AISI 304 steel, type P be used with locking devices or safety clips?

Yes. The Pin for CAMLOCK connector, AISI 304 steel, type P can be used with locking devices or safety clips. Made of AISI 304 stainless steel, this type P pin is designed to secure camlock couplings by passing through the cam arms and coupling body to prevent accidental disengagement. It is compatible with standard camlock safety clips, cotter pins, or spring pins sized for type P camlock pins. When using locking devices or safety clips, ensure the chosen clip matches the pin diameter and length and is rated for your applicationâs pressure, vibration, and environmental conditions to maintain a secure, reliable connection.

Pin for CAMLOCK connector, AISI 304 steel, type P

Additional information

Material	SS – stainless steel

Pin for CAMLOCK connection, type P. Material: AISI 304 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-P-050	Pin P 1/2" ÷ 3/4"	-	-	In stock	Enquiry
AC-P-050X	Pin P 1/2" ÷ 3/4"	-	-	In stock	Enquiry
AC-P-100	Pin P 1	-	-	In stock	Enquiry
AC-P-100X	Pin P 1	-	-	In stock	Enquiry
AC-P-200	Pin P 1.1/4" ÷ 2.1/2"	-	-	In stock	Enquiry
AC-P-200X	Pin P 1.1/4" ÷ 2.1/2"	-	-	In stock	Enquiry
AC-P-300	Pin P 3" ÷ 5"	-	-	In stock	Enquiry
AC-P-300X	Pin P 3" ÷ 5"	-	-	In stock	Enquiry
AC-P-600	Pin P 6	-	-	In stock	Enquiry