Is the Hydraulic adapter - JIS Komatsu reduction with swivel nut GW METRIC x GZ BSP, carbon steel, type A504 compatible with Komatsu high-pressure systems using a 60Â° inverted cone seal?

Yes. The Hydraulic adapter - JIS Komatsu reduction with swivel nut GW METRIC x GZ BSP, carbon steel, type A504 is compatible with Komatsu high-pressure systems using a 60Â° inverted cone seal. The product description specifies a High-pressure adaptor JIS type A504 with internal metric thread (60Â° inverted cone seal) . KOMATSU . and with external BSP thread (60Â° cone seal). Material and galvanization meet typical highâpressure steel fitting requirements, and the A504 designation indicates the JIS Komatsu geometry designed for the 60Â° inverted cone sealing face. Ensure thread sizes and pressure ratings match your system and follow torque/installation specifications.

Hydraulic adapter – JIS Komatsu reduction with swivel nut GW METRIC x GZ BSP, carbon steel, type A504

Q: Does the Hydraulic adapter - JIS Komatsu reduction with swivel nut GW METRIC x GZ BSP, carbon steel, type A504 support sealing with external BSP 60Â° cone threads?

Yes. Hydraulic adapter - JIS Komatsu reduction with swivel nut GW METRIC x GZ BSP, carbon steel, type A504 supports sealing with external BSP 60Â° cone threads. The A504 description specifies a high-pressure JIS adaptor with an internal metric thread featuring a 60Â° inverted cone seal (Komatsu) combined with an external BSP thread using a 60Â° cone seal. Material is carbon steel, galvanized, meeting the required sealing geometry for BSP external 60Â° cone connections.

Q: Can the Hydraulic adapter - JIS Komatsu reduction with swivel nut GW METRIC x GZ BSP, carbon steel, type A504 be used with galvanized systems?

Yes. Hydraulic adapter - JIS Komatsu reduction with swivel nut GW METRIC x GZ BSP, carbon steel, type A504 can be used with galvanized systems, with the following considerations: - Material/coating compatibility: The adapter is carbon steel, galvanized. Galvanized-to-galvanized connections are generally compatible and provide corrosion protection. Ensure mating components are also galvanized or otherwise corrosion-resistant to avoid galvanic corrosion issues if they are dissimilar metals. - Sealing faces and threads: The adapter uses a 60Â° inverted cone (internal metric) and a 60Â° cone (external BSP) sealing geometry. These metal-to-metal cone seals rely on clean, undamaged sealing surfaces; excessive galvanizing build-up or rough plating can impair sealing. Verify plating thickness and, if necessary, dress or re-seat surfaces per manufacturer guidance. - Torque and assembly: Galvanized coatings can alter friction; use correct torque values for type A504 and the mating fitting to ensure proper seal without damaging the galvanizing. Over-torquing can crack or flake zinc plating, leading to corrosion or leakage. - Pressure and application: Confirm the adapterâs pressure rating and ensure it meets system requirements. High-pressure or critical applications may require additional precautions (e.g., thread sealants, anti-seize compatible with zinc) approved by the manufacturer. - Environmental and longevity factors: In aggressive environments (saltwater, chemicals), zinc galvanizing may degrade; consider alternative materials or additional protective measures. In summary, Hydraulic adapter - JIS Komatsu reduction with swivel nut GW METRIC x GZ BSP, carbon steel, type A504 is suitable for use with galvanized systems if mating parts are compatible, sealing surfaces and plating thickness are acceptable, correct assembly torque is used, and application pressure/environmental requirements are met.

All products, High-pressure adapters/

Additional information

Material	CS – steel (cast iron)

High-pressure adaptor JIS type A504 with internal metric thread (60° inverted cone seal) – KOMATSU and with external BSP thread (60° cone seal). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A504-14-04	Adaptor GW M14x1.5 JIS / GZ BSP 1/4"	-	345	In stock	Enquiry
TI-A504-18-06	Adaptor GW M18x1.5 JIS / GZ BSP 3/8"	-	345	In stock	Enquiry
TI-A504-22-08	Adaptor GW M22x1.5 JIS / GZ BSP 1/2"	-	345	In stock	Enquiry
TI-A504-30-12	Adaptor GW M30x1.5 JIS / GZ BSP 3/4"	-	205	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-pressure adaptor JIS type A504 with internal metric thread (60° inverted cone seal) – KOMATSU and with external BSP thread (60° cone seal). Material: carbon steel, galvanized.