Is the Adaptor 90Â° with GZ BSP, stainless steel, type A116 compatible with both 60Â° cone sealed external BSP male threads?

Yes. The Adaptor 90Â° with GZ BSP, stainless steel, type A116 is compatible with external BSP male threads that use a 60Â° cone seal. The product description specifies two external BSP threads (60Â° cone seal) and material AISI 316L, indicating both sealing faces are designed for the 60Â° cone interface used on external BSP male fittings. Ensure thread size and pressure rating match the mating male threads, and verify correct tightening to achieve the cone seal.

Does the Adaptor 90Â° with GZ BSP, stainless steel, type A116 require specific torque settings for sealing 60Â° cone external BSP threads?

Adaptor 90Â° with GZ BSP, stainless steel, type A116: No specific torque value is provided in the given description. For sealing 60Â° cone external BSP threads the correct practice is to tighten until a metal-to-metal cone contact is achieved without overâstressing the stainless steel (AISI 316L). Use calibrated tools and follow general guidance for BSP cone fittings: start with hand-tight, then apply incremental wrench turns (commonly 1â2 turns) until the cone seats; if available, follow manufacturer torque specs or test assembly for leak tightness. Avoid excessive torque to prevent thread or cone damage; if precise torque is required for your system, consult the manufacturerâs datasheet or technical support.

Can Adaptor 90Â° with GZ BSP, stainless steel, type A116 be used with differing BSP thread sizes on each end?

Yes. Adaptor 90Â° with GZ BSP, stainless steel, type A116 can be used with differing BSP thread sizes on each end, provided a few conditions are met. 1. Thread type compatibility: Both ends of the Adaptor 90Â° with GZ BSP, stainless steel, type A116 are described as external BSP threads with 60Â° cone seals. That means they are BSP (British Standard Pipe) parallel or tapered male threads designed to seal via the cone seat. You must ensure both mating fittings use the same BSP family (e.g., BSPP/BSPT as applicable for the cone seal) so thread form and sealing method match. 2. Size and engagement: Mechanically, the adapter may have different nominal thread sizes on each end if manufactured that way (i.e., stepped adapter). Confirm the specific product variant or part number supports the two different BSP sizes you intend to join. The smaller and larger threads must allow sufficient thread engagement and not compromise strength. 3. Pressure and sealing: Because the seals are 60Â° cone type, correct cone seat seating and torque are essential. Using mismatched or incorrect seat angles, wrong mating components, or inadequate torque can cause leaks or failure under high pressure. Verify pressure ratings for your combined assembly; differing diameters can affect allowable pressure. 4. Material and application: AISI 316L stainless steel is suitable for many corrosive and high-pressure environments, but ensure chemical compatibility and temperature limits for your application. Recommendation: Check the manufacturerâs technical data and ordering codes to confirm the adapter variant supports two different BSP sizes, and verify installation torque, mating part geometry (60Â° cone), and rated pressure for the specific size combination before use.

Adapter 90° with BSP male, stainless steel, type A116

All products, High-pressure adapters/

Additional information

Material	SS – stainless steel

High-pressure 90° adapter type A116 with BSP male thread (60° cone sealing) and with BSP male thread (60° cone sealing). Material: AISI 316L.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A116-02-SS	Adapter 90° 1/8" BSP male / 1/8" BSP male, AISI 316	-	400	In stock	Enquiry
TI-A116-04-SS	Adapter 90° 1/4" BSP male / 1/4" BSP male, AISI 316	-	400	In stock	Enquiry
TI-A116-06-SS	Adapter 90° 3/8" BSP male / 3/8" BSP male, AISI 316	-	400	In stock	Enquiry
TI-A116-08-SS	Adapter 90° 1/2" BSP male / 1/2" BSP male, AISI 316	-	350	In stock	Enquiry
TI-A116-12-SS	Adapter 90° 3/4" BSP male / 3/4" BSP male, AISI 316	-	315	In stock	Enquiry
TI-A116-16-SS	Adapter 90° 1" BSP male / 1" BSP male, AISI 316	-	250	In stock	Enquiry
TI-A116-20-SS	Adapter 90° 1.1/4" BSP male / 1.1/4" BSP male, AISI 316	-	200	In stock	Enquiry