Does the ORFS 90Â° hydraulic end, type ZOW210, carbon steel, zinc-nickel require a specific crimping sleeve size for proper installation?

Yes. The ORFS 90Â° hydraulic end, type ZOW210, carbon steel, zinc-nickel requires a crimping sleeve (ferrule) sized to the specific hose construction and diameter used. The product is described as "designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type," which means you must select a sleeve compatible with: - the hose inner/outer diameter and reinforcement type (single braid, spiral, textile, etc.), and - the manufacturerâs recommended sleeve profile and dimensions for that hose series. Do not use a generic or incorrectly sized sleeve . improper sleeve selection or crimp dimension can cause leaks, fitting pull-off, or hose failure. Follow the hose manufacturerâs crimping chart and the crimping machine settings for the exact sleeve size and crimp specifications for the hose paired with the ORFS 90Â° hydraulic end, type ZOW210, carbon steel, zinc-nickel.

Can ORFS 90Â° hydraulic end, type ZOW210, carbon steel, zinc-nickel require a specific crimping pressure or setting for proper installation?

Yes. ORFS 90Â° hydraulic end, type ZOW210, carbon steel, zinc-nickel requires a specific crimping pressure/setting appropriate to the hose and crimping sleeve used. The fitting is designed for crimping with a sleeve suitable for the hose type, so you must follow the hose manufacturerâs crimping specifications (die size, pressure, and crimp profile) for correct compression and seal integrity. Incorrect pressure or die can cause leaks, weakened joint, or damage to the zincânickel coating. If manufacturer data for the hose or sleeve is unavailable, consult the hose supplier or crimper manufacturer for recommended settings and perform verification tests (pull-off and pressure tests) after crimping.

Is a specific hose type or crimping sleeve profile required for ORFS 90Â° hydraulic end, type ZOW210, carbon steel, zinc-nickel?

No specific proprietary hose type is required for ORFS 90Â° hydraulic end, type ZOW210, carbon steel, zinc-nickel. However, correct crimping depends on matching the crimping sleeve/profile to the hose construction and size used. ORFS 90Â° hydraulic end, type ZOW210 is designed for crimping into hydraulic and industrial hoses using a crimping sleeve suitable for the hose type; therefore: - Select a sleeve profile compatible with the hose (braided, spiral, thermoplastic, etc.) and the hose manufacturerâs recommended crimp profile. - Use the correct sleeve length and inner diameter for the hose size to ensure proper cover and bite. - Follow the hose makerâs crimping specifications: crimp diameter/tolerance, crimp force, and mandrel/die set matched to the sleeve profile. - Ensure the ORFS flat sealing face and internal UNF thread are clean and that the assembly meets required torque and sealing checks after crimping. In summary, ORFS 90Â° hydraulic end, type ZOW210, carbon steel, zinc-nickel does not mandate a unique hose type or proprietary sleeve profile, but you must use a crimping sleeve/profile and crimping parameters appropriate for the specific hose construction and size to achieve a reliable, leak-free crimp.

ORFS 90° hydraulic end, type ZOW210, carbon steel, zinc-nickel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with internal UNF thread and nut, flat sealing (ORFS), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZOW210-09-04-CN	End. ORFS 90° G 9/16", hose 1/4", Zn-Ni	6	-	In stock	Enquiry
TI-ZOW210-11-04-CN	End. ORFS 90° G 11/16", hose 1/4", Zn-Ni	6	-	In stock	Enquiry
TI-ZOW210-11-05-CN	End. ORFS 90° G 11/16", hose 5/16", Zn-Ni	8	-	In stock	Enquiry
TI-ZOW210-11-06-CN	End. ORFS 90° G 11/16", hose 3/8", Zn-Ni	10	-	In stock	Enquiry
TI-ZOW210-13-06-CN	End. ORFS 90° G 13/16", hose 3/8", Zn-Ni	10	-	In stock	Enquiry
TI-ZOW210-13-08-CN	End. ORFS 90° G 13/16", hose 1/2", Zn-Ni	12	-	In stock	Enquiry
TI-ZOW210-16-08-CN	End. ORFS 90° G 1", hose 1/2", Zn-Ni	12	-	In stock	Enquiry
TI-ZOW210-16-10-CN	End. ORFS 90° G 1", hose 5/8", Zn-Ni	16	-	In stock	Enquiry
TI-ZOW210-19-08-CN	End. ORFS 90° G1/2", hose 1/2", Zn-Ni	12	-	In stock	Enquiry
TI-ZOW210-19-12-CN	End. ORFS 90° G1.3/16", hose 3/4", Zn-Ni	20	-	In stock	Enquiry
TI-ZOW210-23-12-CN	End. ORFS 90° G1.7/16", hose 3/4", Zn-Ni	20	-	In stock	Enquiry
TI-ZOW210-23-16-CN	End. ORFS 90° G1.7/16", hose 1", Zn-Ni	25	-	In stock	Enquiry
TI-ZOW210-27-20-CN	End. ORFS 90° G 1.11/16", hose 1.1/4", Zn-Ni	32	-	In stock	Enquiry
TI-ZOW210-32-24-CN	End. ORFS 90° G 2", hose 1.1/2", Zn-Ni	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with internal UNF thread and nut, flat sealing (ORFS), 90° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.