Can NON SKIVE DKOS straight end, heavy series, carbon steel, type NMW122 be assembled onto 4SP/4SH/R13/R15 hoses using TI-N sleeves without cutting the hose rubber?

Yes. NON SKIVE DKOS straight end, heavy series, carbon steel, type NMW122 can be assembled onto 4SP/4SH/R13/R15 hoses using TI-N sleeves without cutting the hose rubber. The fitting is a NON SKIVE design, intended for crimping with TI-N sleeves, features an internal metric thread with 24Â° cone sealing and O-ring (DKOS), and is specified for heavy-series crimping on those hose types; installation is performed without removing the hose cover.

Is NON SKIVE DKOS straight end, heavy series, carbon steel, type NMW122 compatible with TI-N sleeves for crimping without cutting hose rubber?

Yes. NON SKIVE DKOS straight end, heavy series, carbon steel, type NMW122 is compatible with TI-N sleeves for crimping without cutting the hose rubber. Reasoning: - The product description explicitly states it is a Straight NON SKIVE end fitting with internal metric thread, with sealing on a 24Â° cone, oâring (DKOS), heavy series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N. - The installation note specifically says: without cutting the hose rubber, confirming the NON SKIVE design and TI-N sleeve are intended to work together for crimping without removing the hose cover. Ensure you use the correct hose types (4SP, 4SH, R13, R15) and the specified TI-N sleeve dimensions and crimping die settings from the manufacturer to achieve a proper, leakâfree crimp.

NON SKIVE DKOS straight end, heavy series, carbon steel, type NMW122

Q: Can NON SKIVE DKOS straight end, heavy series, carbon steel, type NMW122 be crimped onto 4SP/4SH/R13/R15 hoses without cutting the hose rubber using TI-N sleeves?

Yes . NON SKIVE DKOS straight end, heavy series, carbon steel, type NMW122 can be crimped onto 4SP/4SH/R13/R15 hoses using TI-N sleeves without cutting the hose rubber. The product description specifies: straight NON SKIVE end fitting with internal metric thread, sealing on a 24Â° cone with O-ring (DKOS), heavy series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N, installation without cutting the hose rubber, material carbon steel, galvanized. Ensure correct sleeve size, crimping tool/settings per manufacturer recommendations, and verify assembly/testing (burst/transfer) after crimping for safety and compliance.

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	3

Straight NON SKIVE end fitting with internal metric thread, with sealing on a 24° cone, o-ring (DKOS), heavy series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N… . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-NMW122-30-12	End. NON SKIVE GW M30x2, hose 3/4"	20	420	In stock	Enquiry
TI-NMW122-36-12	End. NON SKIVE GW M36x2, hose 3/4"	20	420	In stock	Enquiry
TI-NMW122-36-16	End. NON SKIVE GW M36x2, hose 1"	25	380	In stock	Enquiry
TI-NMW122-42-16	End. NON SKIVE GW M42x2, hose 1"	25	380	In stock	Enquiry
TI-NMW122-42-20	End. NON SKIVE GW M42x2, hose 1.1/4"	32	325	In stock	Enquiry
TI-NMW122-52-20	End. NON SKIVE GW M52x2, hose 1.1/4"	32	325	In stock	Enquiry
TI-NMW122-52-24	End. NON SKIVE GW M52x2, hose 1.1/2"	38	290	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Straight NON SKIVE end fitting with internal metric thread, with sealing on a 24° cone, o-ring (DKOS), heavy series, intended for crimping in hoses type 4SP, 4SH, R13, and R15 using crimping sleeve TI-N… . Installation: without cutting the hose rubber. Material: carbon steel, galvanized.