Is the Adapter cap, female thread METRIC, carbon steel, type A708 compatible with hydraulic systems requiring a 60Â° cone sealing and flat hex key installation?

Yes. Adapter cap, female thread METRIC, carbon steel, type A708 is compatible with hydraulic systems requiring a 60Â° cone sealing and flat hex key installation. The product description explicitly states it is a high-pressure plug type A708 with internal metric thread (60Â° cone sealing) and designed for a flat hex key, made of carbon steel and galvanized.matching both the sealing geometry and the installation method required. Ensure thread size matches your systemâs metric thread specification and that pressure ratings and material compatibility meet your applicationâs requirements.

Can Adapter cap, female thread METRIC, carbon steel, type A708 be used in high-pressure applications requiring a 60Â° cone seal and flat hex key access?

Yes. Adapter cap, female thread METRIC, carbon steel, type A708 can be used for high-pressure applications requiring a 60Â° cone seal and flat hex key access. The product description specifies an internal metric thread with 60Â° cone sealing and flat hex key operation, and the material (carbon steel, galvanized) is suitable for high-pressure environments when compatible with system pressure ratings and fluid/corrosion conditions. Confirm the specific pressure rating and thread size match your system and verify compatibility with media, temperature, and applicable standards before installation.

Does Adapter cap, female thread METRIC, carbon steel, type A708 provide reliable sealing under high-pressure conditions with a 60Â° cone?

Yes. the Adapter cap, female thread METRIC, carbon steel, type A708 provides reliable sealing under high-pressure conditions when used with a matching 60Â° cone male counterpart, given proper installation and compatible components. Key points: - Sealing design: The 60Â° cone sealing specified in the product description is a standard metal-to-metal sealing geometry widely used for high-pressure hydraulic fittings; when the male and female 60Â° seats are correctly machined and matched, they form a tight, pressure-resistant metal seal. - Material and finish: Carbon steel with galvanization offers strength and corrosion resistance suitable for high-pressure environments. Carbon steel provides the necessary hardness and load-bearing capacity for metal cone seals; galvanizing aids durability but avoid using zinc coatings where high-temperature or certain fluid compatibilities matter. - Compatibility and fit: Reliable sealing requires proper matching of thread type (metric), cone angle (60Â°), and dimensional tolerances. Use a correctly sized metric male cone fitting of the same standard and quality to ensure full seat engagement. - Installation: Tighten to recommended torque values and avoid cross-threading or damage to the cone surfaces. Debris, nicks, or improper torque can compromise the metal-to-metal seal. - Limitations: Metal cone seals are robust but less forgiving than soft seals for vibration or misalignment. Also consider pressure, temperature, and media compatibility; galvanization may not suit certain fluids or high temperatures. - Recommendation: For critical high-pressure applications, verify component standards/specifications (pressure rating), inspect mating surfaces, and follow manufacturer torque/spec guidelines. If system conditions include extreme vibration, temperature, or incompatible fluids, consider alternative sealing methods or materials. Conclusion: When matched with the correct metric male 60Â° cone fitting and properly installed, the Adapter cap, female thread METRIC, carbon steel, type A708 is designed to provide a reliable high-pressure seal.

Adapter cap, female thread METRIC, carbon steel, type A708

All products, High-pressure adapters/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	10, 120

Adaptor – high-pressure plug type A708, with internal metric thread (60° cone sealing), for a flat hex key. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A708-10	Blind plug GW M10x1	-	400	In stock	Enquiry
TI-A708-12	Blind plug GW M12x1.5	-	400	In stock	Enquiry
TI-A708-14	Blind plug G1/2 M14x1.5	-	400	In stock	Enquiry
TI-A708-16	Blind plug GW M16x1.5	-	400	In stock	Enquiry
TI-A708-18	Blind plug GW M18x1.5	-	400	In stock	Enquiry
TI-A708-20	Blind plug GW M20x1.5	-	350	In stock	Enquiry
TI-A708-22	Blind plug GW M22x1.5	-	350	In stock	Enquiry
TI-A708-24	Blind plug GW M24x1.5	-	315	In stock	Enquiry
TI-A708-26	Blind plug GW M26x1.5	-	315	In stock	Enquiry