Is the Pressure washer gun with lance MT8 with GW outlet M22x1.5, SG35 safe to use with both hot (up to 160Â°C) and cold water at working pressure up to 310 bar?

Yes. Pressure washer gun with lance MT8 with GW outlet M22x1.5, SG35 is specified for both hot and cold water and rated for operating temperatures up to +160Â°C and working pressure up to 310 bar (maximum 350 bar). The lance materials (stainless steel or galvanized), high-strength plastic housing, and lever mechanism designed for comfortable operation support safe use within those limits. Ensure all connections (M22x1.5 outlet) and any swivel fittings are properly installed and that the system is not used above the stated temperature or pressure limits.

Can the Pressure washer gun with lance MT8 with GW outlet M22x1.5, SG35 be fitted with a swivel connection for easier installation?

Yes. Pressure washer gun with lance MT8 with GW outlet M22x1.5, SG35 can be fitted with a swivel connection for easier installation - the gun is also available with a swivel connection option, facilitating rotation and simpler hose alignment during use.

Does the Pressure washer gun with lance MT8 with GW outlet M22x1.5, SG35 require special seals for 160Â°C operation?

Pressure washer gun with lance MT8 with GW outlet M22x1.5, SG35. Based on the product description, the tool is rated for operation up to +160Â°C. To achieve that temperature safely, you should use seals and O-rings rated for high temperatures; standard low-temperature seals (e.g., nitrile/Buna-N) will degrade at 160Â°C. Recommended materials for seals at 160Â°C include PTFE (Teflon), graphite-impregnated packing, fluorocarbon (VitonÂ®) for limited durations (check specific compound limits), or specialty high-temperature elastomers (e.g., perfluoroelastomer) depending on chemical exposure. Verify with the manufacturer which seal materials are fitted in the supplied unit and request high-temperature-rated seals or a high-temp sealing kit if not specified. Also ensure compatibility with pressure (up to 350 bar) and any detergents or chemicals used.

Gun for washer pressure with lance MT8 with outlet M22x1.5 female, SG35

All products, Guns for high-pressure washers/

Additional information

High-pressure Water gun SG35 with lance MT8 for applications industrial. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. part outlet lance terminated a thread internal metric M22x1.5. lance made of steel stainless or galvanized. The gun is also available with a swivel connection to the installation. Housing material: high-strength plastic. Working pressure: up to 310 bar. pressure The permissible: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MH-100402	Gun SG35 with lance SSMT8 M22x1.5 female, inlet M22x1.5 male	-	310	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-pressure Water gun SG35 with lance MT8 for applications industrial. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. part outlet lance terminated a thread internal metric M22x1.5. lance made of steel stainless or galvanized. The gun is also available with a swivel connection to the installation. Housing material: high-strength plastic. Working pressure: up to 310 bar. pressure The permissible: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C.