Can the Shell clamp for mounting EASY type hoses, plastic withstand 10 bar in long-term use with different hygienic connections (DIN, SMS, Triclover)?

Yes . the Shell clamp for mounting EASY type hoses, plastic is designed for long-term use at a working pressure of 10 bar when fitted with standard hygienic connections (DIN, SMS, Triclover). Key points supporting this: - Design and material: It is made from a special highâstrength plastic formulated for sustained mechanical load, not just shortâterm use. - Hose interface: Internal grooves are precisely matched to the externally corrugated EASY series hoses (e.g., VINOFLEX EASY, MILLENNIUM EASY), ensuring secure mechanical engagement and preventing slippage or extrusion under pressure. - Connection compatibility: The clamp is engineered for installation of standard hygienic connections (DIN, SMS, Triclover and others) using the common stub for shell clamps, so the joint geometry and sealing surfaces are appropriate for pressure retention at 10 bar. - Specified working pressure: The product specification explicitly lists working pressure as 10 bar, which indicates it was tested and rated for continuous operation at that pressure when installed correctly. Conditions and caveats: longâterm reliability depends on correct assembly (proper hose seating, clamp tightening, compatible gaskets/seals), chemical and temperature compatibility of the plastic with the process media, and avoidance of mechanical damage or excessive dynamic loads. For critical or safetyâsensitive installations, follow manufacturer installation instructions and consider validation testing or periodic inspections.

Is the Shell clamp for mounting EASY type hoses, plastic compatible with various hygienic fittings (DIN, SMS, Triclover) under 10 bar?

Yes. The Shell clamp for mounting EASY type hoses, plastic is designed for hygienic fittings (DIN, SMS, Triclover and others) with a standard stub for the shell clamp and is rated to 10 bar. Its internal grooves match EASY series hoses and the highâstrength plastic construction supports assembly and the stated working pressure.

Does the Shell clamp for mounting EASY type hoses, plastic maintain seal integrity with corrugated hoses under 10 bar?

Shell clamp for mounting EASY type hoses, plastic is designed specifically to maintain seal integrity with externally corrugated EASY-series hoses (e.g., VINOFLEX EASY, MILLENNIUM EASY). Its internal grooves are precisely matched to the hose corrugations, which ensures positive mechanical engagement and helps prevent axial or radial movement that could compromise the joint. The clamp is intended for installation of standard hygienic connections (DIN, SMS, Triclover, etc.) and is manufactured from a special high-strength plastic rated for a working pressure of 10 bar. Given these features. matched internal grooves, purpose-built design for EASY corrugated hoses, and a working pressure specification of 10 bar. the Shell clamp for mounting EASY type hoses, plastic is suitable to maintain seal integrity with corrugated EASY hoses up to 10 bar when properly installed with the correct hygienic connection and hose end. Proper assembly practice (correct seating, torque/closure per manufacturer instructions, and use of compatible fittings) is required to achieve the rated performance.

A clamp shell for mounting hoses type EASY, plastic

All products, Food and beverage hoses/

Additional information

Material	P – material (plastic)
Standard length [m]	1.52, 3.05, 60/ 120

A clamp shell made of special high-strength plastic, enabling easy assembly fittings hygienic for corrugated externally hoses series EASY (e.g. VINOFLEX EASY, MILLENNIUM EASY). A clamp has internal corrugations matched precisely for barbs hoses series EASY and is adapted for mounting fittings hygienic (DIN, SMS, Triclover and other) having standard spigot under a clamp shell. Working pressure: 10 bar. Material: high-strength plastic.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
IV-EASYSHELL-025	Shell clamp EASY SHELL 25 mm	-	-	In stock	Enquiry
IV-EASYSHELL-032	Shell clamp EASY SHELL 32 mm	-	-	In stock	Enquiry
IV-EASYSHELL-038	Shell clamp EASY SHELL 38 mm	-	-	In stock	Enquiry
IV-EASYSHELL-040	Shell clamp EASY SHELL 40 mm	-	-	In stock	Enquiry
IV-EASYSHELL-050	Shell clamp EASY SHELL 50 mm	-	-	In stock	Enquiry
IV-EASYSHELL-063	Shell clamp EASY SHELL 63.5 mm	-	-	In stock	Enquiry
IV-EASYSHELL-076	Shell clamp EASY SHELL 76 mm	-	-	In stock	Enquiry
IV-EASYSHELL-080	Shell clamp EASY SHELL 80 mm	-	-	In stock	Enquiry
IV-EASYSHELL-100	Shell clamp EASY SHELL 100 mm	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A clamp shell made of special high-strength plastic, enabling easy assembly fittings hygienic for corrugated externally hoses series EASY (e.g. VINOFLEX EASY, MILLENNIUM EASY). A clamp has internal corrugations matched precisely for barbs hoses series EASY and is adapted for mounting fittings hygienic (DIN, SMS, Triclover and other) having standard spigot under a clamp shell. Working pressure: 10 bar. Material: high-strength plastic.