Can the DKR 45Â° hydraulic end, type ZBW310, AISI 316 steel (PH) be crimped with standard crimping sleeves marked "-PH" for my hose type?

Yes . the DKR 45Â° hydraulic end, type ZBW310, AISI 316 steel (PH) can be crimped with standard crimping sleeves marked "-PH" provided the sleeve is specified for your exact hose type. The product description states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose and explicitly instructs to use sleeves additionally marked with the letters "-PH". Ensure you: - Match the sleeve model (-PH) to your hose construction, diameter and operating pressure. - Use correct crimp dimensions and tooling recommended by the sleeve/hose manufacturer. - Verify compatibility with AISI 316 (PH) material where required (corrosion/resistance considerations). - Perform a pressure test after crimping per industry standards. If you provide your hose make/model and nominal size, I can confirm the exact -PH sleeve code and crimp parameters.

Does the DKR 45Â° hydraulic end, type ZBW310, AISI 316 steel (PH) require special -PH crimping sleeves for PTFE-lined hoses?

Yes. The DKR 45Â° hydraulic end, type ZBW310, AISI 316 steel (PH) requires crimping sleeves that are suitable for the type of hose and specifically marked with the suffix "-PH" when used with PTFE-lined hoses. Use sleeves labelled "-PH" to ensure proper crimping compatibility with PTFE-lined hose assemblies.

Is the DKR 45Â° hydraulic end, type ZBW310, AISI 316 steel (PH) compatible with -PH crimping sleeves for my hose?

Yes. the DKR 45Â° hydraulic end, type ZBW310, AISI 316 steel (PH) is compatible with -PH crimping sleeves for your hose. The product description explicitly states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose and specifies to use sleeves marked with the letters "-PH". Since the fitting material and design (AISI 316 steel, 60Â° sealing cone, internal BSP thread and nut, 45Â° angle, for crimping) match that requirement, you should use the -PH designated crimping sleeves to ensure proper crimp, seal and performance. Note: always verify sleeve size and hose compatibility (inner/outer diameters, reinforcement type, and crimping specifications) with the hose and sleeve manufacturer or technical datasheets before crimping.

DKR 45° hydraulic end, type ZBW310, AISI 316 steel (PH)

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	10

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, 60° sealing cone (DKR), 45° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters “-PH” at the end of the index). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZBW310-02-03-SS-PH	End. 45°GW 1/8" BSP, hose 3/16", cone 60°, AISI 316	5		In stock	Enquiry
TI-ZBW310-02-04-SS-PH	End 45°GW 1/8" BSP, hose 1/4", cone 60°, AISI 316	6		In stock	Enquiry
TI-ZBW310-04-03-SS-PH	End. 45° GW 1/4" BSP, hose 3/16", cone 60°, AISI 316	5	450	In stock	Enquiry
TI-ZBW310-04-04-SS-PH	End fitting 45° GW 1/4" BSP, hose 1/4", cone 60°, AISI 316	6	450	In stock	Enquiry
TI-ZBW310-04-05-SS-PH	End. 45° GW 1/4" BSP, hose 5/16", cone 60°, AISI 316	8	445	In stock	Enquiry
TI-ZBW310-04-06-SS-PH	End. 45° GW 1/4" BSP, hose 3/8", cone 60°, AISI 316	10	445	In stock	Enquiry
TI-ZBW310-06-04-SS-PH	End 45° GW 3/8" BSP, hose 1/4", cone 60°, AISI 316	6	445	In stock	Enquiry
TI-ZBW310-06-05-SS-PH	End. 45° GW 3/8" BSP, hose 5/16", cone 60°, AISI 316	8	445	In stock	Enquiry
TI-ZBW310-06-06-SS-PH	End fitting 45° GW 3/8" BSP, hose 3/8", cone 60°, AISI 316	10	445	In stock	Enquiry
TI-ZBW310-06-08-SS-PH	End fitting 45° GW 3/8" BSP, hose 1/2", cone 60°, AISI 316	12	415	In stock	Enquiry
TI-ZBW310-08-06-SS-PH	End. 45° GW 1/2" BSP, hose 3/8", cone 60°, AISI 316	10	415	In stock	Enquiry
TI-ZBW310-08-08-SS-PH	End fitting 45° GW 1/2" BSP, hose 1/2", cone 60°, AISI 316	12	415	In stock	Enquiry
TI-ZBW310-08-10-SS-PH	End fitting 45° GW 1/2" BSP, hose 5/8", cone 60°, AISI 316	16	350	In stock	Enquiry
TI-ZBW310-10-08-SS-PH	End. 45° GW 5/8" BSP, hose 1/2", cone 60°, AISI 316	12	350	In stock	Enquiry
TI-ZBW310-10-10-SS-PH	End fitting 45° GW 5/8" BSP, hose 5/8", cone 60°, AISI 316	16	350	In stock	Enquiry
TI-ZBW310-12-08-SS-PH	End. 45° GW 3/4" BSP, hose 1/2", cone 60°, AISI 316	12	350	In stock	Enquiry
TI-ZBW310-12-10-SS-PH	End 45° GW 3/4" BSP, hose 5/8", cone 60°, AISI 316	16	350	In stock	Enquiry
TI-ZBW310-12-12-SS-PH	End fitting 45° GW 3/4" BSP, hose 3/4", cone 60°, AISI 316	20	350	In stock	Enquiry
TI-ZBW310-16-12-SS-PH	End. 45° GW 1" BSP, hose 3/4", cone 60°, AISI 316	20	280	In stock	Enquiry
TI-ZBW310-16-16-SS-PH	End fitting 45° GW 1" BSP, hose 1", cone 60°, AISI 316	25	280	In stock	Enquiry
TI-ZBW310-20-16-SS-PH	End fitting 45° GW 1.1/4" BSP, hose 1", cone 60°, AISI 316	25	210	In stock	Enquiry
TI-ZBW310-20-20-SS-PH	End. 45° GW 1.1/4" BSP, hose 1.1/4", cone 60°, AISI 316	32	210	In stock	Enquiry
TI-ZBW310-24-20-SS-PH	End fitting 45° GW 1.1/2" BSP, hose 1.1/4", cone 60°, AISI 316	32	185	In stock	Enquiry
TI-ZBW310-24-24-SS-PH	End fitting 45° GW 1.1/2" BSP, hose 1.1/2", cone 60°, AISI 316	38	185	In stock	Enquiry
TI-ZBW310-32-24-SS-PH	End. 45° GW 2" BSP, hose 1.1/2", cone 60°, AISI 316	38	175	In stock	Enquiry
TI-ZBW310-32-32-SS-PH	End. 45° GW 2" BSP, hose 2", cone 60°, AISI 316	50	175	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal BSP thread and nut, 60° sealing cone (DKR), 45° angled. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters “-PH” at the end of the index). Material: AISI 316 steel.