Is DKOS hydraulic end, type ZMW122, heavy series, AISI 316 steel (PH) compatible with standard crimping sleeves marked â-PHâ for hose assembly?

Yes. The DKOS hydraulic end, type ZMW122, heavy series, AISI 316 steel (PH) is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose; the product description explicitly instructs to use sleeves marked with the additional suffix â-PH.â Therefore standard crimping sleeves marked â-PHâ are compatible with the DKOS hydraulic end, type ZMW122, heavy series, AISI 316 steel (PH) for hose assembly.

Does the DKOS hydraulic end, type ZMW122, heavy series, AISI 316 steel (PH) require a specific O-ring size for 24Â° cone sealing?

Yes. The DKOS hydraulic end, type ZMW122, heavy series, AISI 316 steel (PH) requires a specific Oâring sized to seal on the 24Â° cone. Use an Oâring compatible with AISI 316 fittings and the fluid, sized to fit the cone geometry specified for DKOS 24Â° cone sealing (inner diameter matching the cone seat and crossâsection per the manufacturerâs DKOS 24Â° Oâring specification). For crimped PH sleeves ensure the Oâring material (e.g., NBR, FKM, EPDM) suits operating temperature and medium. If exact dimensions are needed, refer to the DKOS/ZMW122 manufacturer Oâring size chart for the 24Â° cone seat.

DKOS hydraulic end, type ZMW122, heavy series, AISI 316 steel (PH)

Q: Can DKOS hydraulic end, type ZMW122, heavy series, AISI 316 steel (PH) be used with hoses requiring corrosion-resistant fittings?

Yes. DKOS hydraulic end, type ZMW122, heavy series, AISI 316 steel (PH) is suitable for use with hoses that require corrosion-resistant fittings. The product description specifies AISI 316 stainless steel construction (PH), which provides high corrosion resistance appropriate for corrosive environments and compatible with hoses needing corrosion-resistant components. Additionally, the fitting is designed for crimping in hydraulic and industrial hoses using a crimping sleeve marked with the â-PHâ suffix, indicating the correct sleeve type for this material and heavy-series configuration. The fitting uses an internal metric thread with nut and seals via an O-ring on a 24Â° cone (DKOS), so ensure the hose assembly uses the specified PH crimp sleeves, correct crimping tooling and process, and compatible O-ring material for the applicationâs fluid and environmental conditions.

All products, Fittings for high-pressure hoses/

Additional information

Material	SS – stainless steel
Standard length [m]	15, 25

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters “-PH” at the end of the index). Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMW122-14-03-SS-PH	End. GW M14x1.5, hose 3/16", 24°, o-ring, heavy, AISI 316	5	-	In stock	Enquiry
TI-ZMW122-14-04-SS-PH	End. GW M14x1.5, hose 1/4", 24°, o-ring, heavy, AISI 316	6	-	In stock	Enquiry
TI-ZMW122-16-03-SS-PH	End. GW M16x1.5, hose 3/16", 24°, o-ring, heavy, AISI 316	5	-	In stock	Enquiry
TI-ZMW122-16-04-SS-PH	End. GW M16x1.5, hose 1/4", 24°, o-ring, heavy, AISI 316	6	-	In stock	Enquiry
TI-ZMW122-16-05-SS-PH	End. GW M16x1.5, hose 5/16", 24°, o-ring, heavy, AISI 316	8	-	In stock	Enquiry
TI-ZMW122-16-06-SS-PH	End. GW M16x1.5, hose 3/8", 24°, o-ring, heavy, AISI 316	10	-	In stock	Enquiry
TI-ZMW122-18-04-SS-PH	End. GW M18x1.5, hose 1/4", 24°, o-ring, heavy, AISI 316	6	-	In stock	Enquiry
TI-ZMW122-18-05-SS-PH	End. GW M18x1.5, hose 5/16", 24°, o-ring, heavy, AISI 316	8	-	In stock	Enquiry
TI-ZMW122-18-06-SS-PH	End. GW M18x1.5, hose 3/8", 24°, o-ring, heavy, AISI 316	10	-	In stock	Enquiry
TI-ZMW122-20-04-SS-PH	End. GW M20x1.5, hose 1/4", 24°, o-ring, heavy, AISI 316	6	-	In stock	Enquiry
TI-ZMW122-20-05-SS-PH	End. GW M20x1.5, hose 5/16", 24°, o-ring, heavy, AISI 316	8	-	In stock	Enquiry
TI-ZMW122-20-06-SS-PH	End. GW M20x1.5, hose 3/8", 24°, o-ring, heavy, AISI 316	10	-	In stock	Enquiry
TI-ZMW122-20-08-SS-PH	End. GW M20x1.5, hose 1/2", 24°, o-ring, heavy, AISI 316	12	-	In stock	Enquiry
TI-ZMW122-22-05-SS-PH	End. GW M22x1.5, hose 5/16", 24°, o-ring, heavy, AISI 316	8	-	In stock	Enquiry
TI-ZMW122-22-06-SS-PH	End. GW M22x1.5, hose 3/8", 24°, o-ring, heavy, AISI 316	10	-	In stock	Enquiry
TI-ZMW122-24-04-SS-PH	End. GW M24x1.5, hose 1/4", 24°, o-ring, heavy, AISI 316	6	-	In stock	Enquiry
TI-ZMW122-24-05-SS-PH	End. GW M24x1.5, hose 5/16", 24°, o-ring, heavy, AISI 316	8	-	In stock	Enquiry
TI-ZMW122-24-06-SS-PH	End. GW M24x1.5, hose 3/8", 24°, o-ring, heavy, AISI 316	10	-	In stock	Enquiry
TI-ZMW122-24-08-SS-PH	End. GW M24x1.5, hose 1/2", 24°, o-ring, heavy, AISI 316	12	-	In stock	Enquiry
TI-ZMW122-24-10-SS-PH	End. GW M24x1.5, hose 5/8", 24°, o-ring, heavy, AISI 316	16	-	In stock	Enquiry
TI-ZMW122-30-06-SS-PH	End. GW M30x2, hose 3/8, 24°, o-ring, heavy, AISI 316	10	-	In stock	Enquiry
TI-ZMW122-30-08-SS-PH	End. GW M30x2, hose 1/2", 24°, o-ring, heavy, AISI 316	12	-	In stock	Enquiry
TI-ZMW122-30-10-SS-PH	End. GW M30x2, hose 5/8", 24°, o-ring, heavy, AISI 316	16	-	In stock	Enquiry
TI-ZMW122-30-12-SS-PH	End. GW M30x2, hose 3/4", 24°, o-ring, heavy, AISI 316	20	-	In stock	Enquiry
TI-ZMW122-36-08-SS-PH	End. GW M36x2, hose 1/2", 24°, o-ring, heavy, AISI 316	12	-	In stock	Enquiry
TI-ZMW122-36-10-SS-PH	End. GW M36x2, hose 5/8", 24°, o-ring, heavy, AISI 316	16	-	In stock	Enquiry
TI-ZMW122-36-12-SS-PH	End. GW M36x2, hose 3/4", 24°, o-ring, heavy, AISI 316	20	-	In stock	Enquiry
TI-ZMW122-36-16-SS-PH	End. GW M36x2, hose 1", 24°, o-ring, heavy, AISI 316	25	-	In stock	Enquiry
TI-ZMW122-42-12-SS-PH	End. GW M42x2, hose 3/4", 24°, o-ring, heavy, AISI 316	20	-	In stock	Enquiry
TI-ZMW122-42-16-SS-PH	End. GW M42x2, hose 1", 24°, o-ring, heavy, AISI 316	25	-	In stock	Enquiry
TI-ZMW122-52-16-SS-PH	End. GW M52x2, hose 1", 24°, o-ring, heavy, AISI 316	25	-	In stock	Enquiry
TI-ZMW122-52-20-SS-PH	End. GW M52x2, hose 1.1/4", 24°, o-ring, heavy, AISI 316	32	-	In stock	Enquiry
TI-ZMW122-52-24-SS-PH	End. GW M52x2, hose 1.1/2", 24°, o-ring, heavy, AISI 316	38	-	In stock	Enquiry
TI-ZMW122-68-24-SS-PH	End. GW M68x2, hose 1.1/2", 24°, o-ring, heavy, AISI 316	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end fitting (type Z – with a regular hydraulic “tail” for hose), with internal metric thread and nut, sealing with an O-ring on a 24° cone (DKOS), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose (use sleeves marked additionally with the letters “-PH” at the end of the index). Material: AISI 316 steel.