Is the KLAUDIA lever connector socket with hose end, aluminum, type KMS suitable for unloading cement wagons and handling pressures up to 8 bar (water)?

Yes . the KLAUDIA lever connector socket with hose end, aluminum, type KMS is suitable for unloading cement wagons and for applications involving water pressures up to 8 bar. The product description explicitly lists unloading cement wagons among its intended uses and specifies a working pressure of up to 8 bar (water). Construction materials and ratings that support this suitability: - Body: aluminum . durable and commonly used for industrial couplings. - Sealing: EPDM . compatible with water and provides reliable sealing at the stated pressure. - Working pressure: up to 8 bar for water (up to 3 bar for air). - Operating temperature: -25Â°C to +60Â°C . suitable for typical outdoor and industrial conditions. Ensure compatibility with your specific hose diameter, fittings, and any abrasives or additives in the cement slurry that might affect wear. For pneumatic use or pressured air above 3 bar, select a different product or consult the manufacturer.

Can the KLAUDIA lever connector socket with hose end, aluminum, type KMS be used in irrigation and agricultural systems at temperatures down to -25Â°C?

Yes. The KLAUDIA lever connector socket with hose end, aluminum, type KMS can be used in irrigation and agricultural systems at temperatures down to â25Â°C. Its specified operating temperature range is â25Â°C to +60Â°C, it is made of aluminum with EPDM sealing suitable for water applications, and it supports working pressures up to 8 bar (water), which fits typical irrigation and agricultural requirements.

Can the KLAUDIA lever connector socket with hose end, aluminum, type KMS be used with EPDM seals for chemical-resistant applications?

Possibly, but with important limitations. The KLAUDIA lever connector socket with hose end, aluminum, type KMS uses EPDM seals and is suitable for many waterâbased, agricultural and general industrial applications. EPDM is excellent for hot and cold water, steam (short-term), many alkaline solutions, and for resistance to weathering, ozone and aging. However, EPDM has poor resistance to hydrocarbons, oils, fuels, many organic solvents, ketones, chlorinated solvents, and certain acids. If your chemical application involves aqueous solutions, diluted acids/alkalis, or nonâaggressive inorganic chemicals, the KLAUDIA lever connector socket with hose end, aluminum, type KMS with EPDM seals will often be acceptable within the specified operating limits (â25 Â°C to +60 Â°C; up to 8 bar water, up to 3 bar air). If the fluid contains hydrocarbons, oils, fuels, solvents, many alcohols or aggressive chemicals, EPDM is not recommended. Recommended steps before use: - Identify the exact chemical(s), concentration and temperature. - Check EPDM chemical compatibility charts for those specific chemicals. - Verify aluminum wettability/corrosion compatibility with the fluid. - Test a sample assembly under expected pressure, temperature and exposure time, or consult the manufacturer for application approval. Conclusion: Use KLAUDIA lever connector socket with hose end, aluminum, type KMS with EPDM seals for chemically resistant service only when the fluid is known to be compatible with EPDM and aluminum; for hydrocarbons/solvents/strong corrosives choose a different seal material (e.g., Viton/FKM, NBR, PTFE) and confirm compatibility.

KLAUDIA lever connector socket with hose end, aluminum, type KMS

All products, Lever couplings/

Additional information

Material	AL – aluminum

Lever connector socket KLAUDIA with “tail” for hose with wide applications: for unloading cement wagons, in needle filter installations IGE (ground dewatering installations), agricultural farms, tank trucks, irrigation systems, industry, and construction. Material: aluminum. Sealing: EPDM. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: from -25°C to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
KL-KMS-051-050	KMS socket 51 mm with end for 50 mm hose, aluminum	50	8	In stock	Enquiry
KL-KMS-051-075	KMS socket 51 mm with end for 75 mm hose, aluminum	75	8	In stock	Enquiry
KL-KMS-051-080	KMS socket 51 mm with end for 80 mm hose, aluminum	80	8	In stock	Enquiry
KL-KMS-051-089	KMS socket 51 mm with end for hose 89 mm, aluminum	90	8	In stock	Enquiry
KL-KMS-051-100	KMS socket 51 mm with end for hose 100 mm, aluminum	100	8	In stock	Enquiry
KL-KMS-051-110	KMS socket 51 mm with end for hose 110 mm, aluminum	110	8	In stock	Enquiry
KL-KMS-070-050	KMS socket 70 mm with end for 50 mm hose, aluminum	50	8	In stock	Enquiry
KL-KMS-070-075	KMS socket 70 mm with end for hose 75 mm, aluminum	75	8	In stock	Enquiry
KL-KMS-070-080	KMS socket 70 mm with end for 80 mm hose, aluminum	80	8	In stock	Enquiry
KL-KMS-070-089	KMS socket 70 mm with end for 89 mm hose, aluminum	90	8	In stock	Enquiry
KL-KMS-070-100	KMS socket 70 mm with end for hose 100 mm, aluminum	100	8	In stock	Enquiry
KL-KMS-070-110	KMS socket 70 mm with end for hose 110 mm, aluminum	110	8	In stock	Enquiry
KL-KMS-089-050	KMS socket 89 mm with end for 50 mm hose, aluminum	50	8	In stock	Enquiry
KL-KMS-089-075	KMS socket 89 mm with end for 75 mm hose, aluminum	75	8	In stock	Enquiry
KL-KMS-089-080	KMS socket 89 mm with end for 80 mm hose, aluminum	80	8	In stock	Enquiry
KL-KMS-089-089	KMS socket 89 mm with end for hose 89 mm, aluminum	90	8	In stock	Enquiry
KL-KMS-089-100	KMS socket 89 mm with end for 100 mm hose, aluminum	100	8	In stock	Enquiry
KL-KMS-089-110	KMS socket 89 mm with end for 110 mm hose, aluminum	110	8	In stock	Enquiry
KL-KMS-108-050	KMS socket 108 mm with end for hose 50 mm, aluminum	50	8	In stock	Enquiry
KL-KMS-108-075	KMS socket 108 mm with end for hose 75 mm, aluminum	75	8	In stock	Enquiry
KL-KMS-108-080	KMS socket 108 mm with end for 80 mm hose, aluminum	80	8	In stock	Enquiry
KL-KMS-108-089	KMS socket 108 mm with end for hose 89 mm, aluminum	90	8	In stock	Enquiry
KL-KMS-108-100	KMS socket 108 mm with end for hose 100 mm, aluminum	100	8	In stock	Enquiry
KL-KMS-108-110	KMS socket 108 mm with end for hose 110 mm, aluminum	110	8	In stock	Enquiry
KL-KMS-133-050	KMS socket 133 mm with end for 50 mm hose, aluminum	50	8	In stock	Enquiry
KL-KMS-133-075	KMS socket 133 mm with end for hose 75 mm, aluminum	75	8	In stock	Enquiry
KL-KMS-133-080	KMS socket 133 mm with end for 80 mm hose, aluminum	80	8	In stock	Enquiry
KL-KMS-133-089	KMS socket 133 mm with end for hose 89 mm, aluminum	90	8	In stock	Enquiry
KL-KMS-133-100	KMS socket 133 mm with end for hose 100 mm, aluminum	100	8	In stock	Enquiry
KL-KMS-133-110	KMS socket 133 mm with end for hose 110 mm, aluminum	110	8	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lever connector socket KLAUDIA with “tail” for hose with wide applications: for unloading cement wagons, in needle filter installations IGE (ground dewatering installations), agricultural farms, tank trucks, irrigation systems, industry, and construction. Material: aluminum. Sealing: EPDM. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: from -25°C to +60°C.