Can CEL twisted hydraulic end, type SMZ111, light series, carbon steel be used with thermoplastic hoses and a screwed sleeve?

Yes. CEL twisted hydraulic end, type SMZ111, light series, carbon steel can be used with thermoplastic hoses and a screwed sleeve. The product description specifies it is a screwed hydraulic end, type S, with external metric thread and 24Â° cone sealing (CEL), lightweight series, designed for screwing into rubber and thermoplastic hoses using a screwed sleeve. Material is carbon steel, galvanized, which matches the stated CEL SMZ111 light series construction and intended application. Ensure correct sleeve and hose dimensions, compatible pressure ratings, and proper assembly torque for a reliable seal.

Can CEL twisted hydraulic end, type SMZ111, light series, carbon steel be installed with rubber or thermoplastic hoses using a screwed sleeve?

Yes. CEL twisted hydraulic end, type SMZ111, light series, carbon steel can be installed with rubber or thermoplastic hoses using a screwed sleeve. The product is a screwed hydraulic end (type S) with external metric thread and 24Â° cone sealing (CEL), designed specifically for screwing into rubber and thermoplastic hoses with a screwed sleeve. Material: carbon steel, galvanized.

Is CEL twisted hydraulic end, type SMZ111, light series, carbon steel compatible with O-ring seals?

Yes. The CEL twisted hydraulic end, type SMZ111, light series, carbon steel is compatible with O-ring seals only if an appropriate O-ring is used in combination with a mating component designed to accept O-ring sealing. The described design is a screwed hydraulic end with external metric thread and primary sealing on a 24Â° cone (CEL), which is a cone-to-cone metal sealing method; this means the standard sealing function is provided by the 24Â° cone contact rather than an integral O-ring groove. However, because the fitting is a screwed type intended for assembly into rubber or thermoplastic hoses using a screwed sleeve, it can be used with auxiliary O-ring seals when the mating part (e.g., a port, adaptor, or coupler) includes an O-ring groove or when an O-ring is added in a suitable recess to provide secondary or redundant sealing. Ensure the O-ring material is compatible with hydraulic fluid and operating temperature/pressure, and verify that the mating part is machined to accept an O-ring without interfering with the 24Â° cone sealing surface.

Fitting hydraulic screw-together CEL, type SMZ111, series light, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Fitting hydraulic screw-together, type S, with metric male thread, 24° cone sealing (CEL), series light. intended for screwing onto hoses rubber and termoplastycznych using a ferrule screw-together. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-SMZ111-14-04	Fitting screw-together M14x1.5 male, hose 1/4"	6	-	In stock	Enquiry
TI-SMZ111-16-05	Fitting screw-together M16x1.5 male, hose 5/16	8	-	In stock	Enquiry
TI-SMZ111-18-06	Fitting screw-together M18x1.5 male, hose 3/8", 24° cone	10	-	In stock	Enquiry
TI-SMZ111-22-08	Fitting screw-together M22x1.5 male, hose 1/2", 24° cone	12	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Fitting hydraulic screw-together, type S, with metric male thread, 24° cone sealing (CEL), series light. intended for screwing onto hoses rubber and termoplastycznych using a ferrule screw-together. Material: carbon steel, galvanized.