Is the SKV plug-in connection with lock nut with BSP socket, galvanized steel, type H compatible with hydraulic systems using DIN 3852 type E NBR seals?

Yes. The SKV plug-in connection with lock nut with BSP socket, galvanized steel, type H (described as "Plug connector with locking nut SKV with external BSP thread (sealing DIN 3852 type E - elastomer gasket with rectangular cross-section) for use in hydraulic systems. Material: galvanized steel. Sealing: NBR.") is compatible with hydraulic systems using DIN 3852 type E NBR seals, because the connector is specified to use exactly that sealing standard and material (DIN 3852 type E, NBR). Ensure thread sizes, pressure ratings and media compatibility match your system before installation.

Can the SKV plug-in connection with lock nut with BSP socket, galvanized steel, type H be used with DIN 3852 type E NBR seals in high-pressure hydraulic systems?

Yes - the SKV plug-in connection with lock nut with BSP socket, galvanized steel, type H can be used with DIN 3852 type E NBR seals in highâpressure hydraulic systems, provided operating conditions fall within the material and seal limits. The connector description specifies sealing: NBR with DIN 3852 type E (rectangular elastomer gasket) and galvanized steel construction, so compatibility is intended for hydraulic use. Ensure system pressure, temperature, fluid compatibility and required sealing class do not exceed NBR and steel ratings (NBR typically up to ~100â120Â°C and compatible with mineral hydraulic oils; pressure limits depend on connector size and manufacturer specifications). Verify exact pressure ratings and certifications from the manufacturer before use in highâpressure applications.

Does the SKV plug-in connection with lock nut with BSP socket, galvanized steel, type H resist common hydraulic fluids with NBR DIN 3852 E seals?

Yes. The SKV plug-in connection with lock nut with BSP socket, galvanized steel, type H Format, fitted with NBR (nitrile rubber) seals to DIN 3852 E, is generally resistant to common hydraulic fluids such as mineralâoil based hydraulic oils, petroleumâbased fluids and many standard antiâwear and multipurpose hydraulic fluids. NBR is widely used in hydraulic applications because of good resistance to oils, greases and fuel hydrocarbons at typical operating temperatures. However, resistance depends on fluid composition and operating conditions. NBR performs well with: - Mineral oilâbased hydraulic fluids (HV, HLP types) - Petroleumâbased gear and engine oils - Some antiâwear and multifunction hydraulic fluids NBR can be less suitable for: - Phosphate ester fluids (e.g., Skydrol). poor compatibility - Some biodegradable or waterâglycol fluids (reduced swelling/embrittlement risk varies) - Synthetic esters and certain aggressive additives (compatibility must be checked) - Extended exposure at high temperatures or high concentrations of water can degrade NBR more rapidly Conclusion: For standard mineralâoil hydraulic systems the SKV plug-in connection with lock nut with BSP socket, galvanized steel, type H Format with NBR DIN 3852 E seals is appropriate and resistant. For phosphateâester, many synthetics, waterâglycol or other specialty fluids, verify compatibility with the fluid supplier or perform material compatibility checks before use.

SKV plug-in connection with lock nut with BSP socket, galvanized steel, type H

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Plug connector with locking nut SKV with external BSP thread (sealing DIN 3852 type E – elastomer gasket with rectangular cross-section) for use in hydraulic systems. Material: galvanized steel. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-SKV-MC-H-12-BE-12	SKV type H 3/4" plug connector with GZ 3/4"	-	500	In stock	Enquiry
TI-SKV-MC-H-16-BE-16	SKV type H 1" plug connector with GZ 1"	-	500	In stock	Enquiry
TI-SKV-MC-H-20-BE-20	SKV type H 1.1/4" plug connector with GZ 1.1/4"	-	450	In stock	Enquiry
TI-SKV-MC-H-24-BE-24	SKV type H 1.1/2" plug connector with GZ 1.1/2"	-	450	In stock	Enquiry
TI-SKV-MC-H-24-BE-32	SKV type H 1.1/2" plug connector with GZ 2"	-	420	In stock	Enquiry
TI-SKV-MC-H-32-BE-32	SKV type H 2" plug connector with GZ 2"	-	420	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug connector with locking nut SKV with external BSP thread (sealing DIN 3852 type E – elastomer gasket with rectangular cross-section) for use in hydraulic systems. Material: galvanized steel. Sealing: NBR.