Can the Ball valve 1/2", GW BSP, stainless steel, BALR be used with foam and aggressive cleaning agents without corroding or degrading its seals?

Yes . the Ball valve 1/2", GW BSP, stainless steel, BALR is designed for use with water, cleaning agents and foam, so it resists typical exposure in cleaning applications. Key points from the specification: - Body material AISI 304 stainless steel offers good general corrosion resistance against water and many cleaning chemicals. - Intended for multifunctional use with cleaning agents and foam, so the construction and seals are chosen for such environments. - EPDM rubber cover protects the valve and provides impact resistance; EPDM is generally resistant to hot water, many soaps, detergents and alkalis commonly used in cleaning. - Working pressure up to 60 bar and temperature up to +95Â°C suit pressurised cleaning processes. Limitations and recommendations: - AISI 304 and EPDM resist many but not all aggressive chemicals (strong acids, concentrated chlorides, certain solvents, or highly oxidative agents can attack 304 stainless steel or degrade EPDM). - For prolonged exposure to highly aggressive disinfectants, strong chlorinated bleaches, or specialty solvents, verify chemical compatibility or consider higher-grade materials (e.g., AISI 316) and alternative seal compounds (e.g., FKM) if required. - Always confirm compatibility with the specific foam or cleaning agent (concentration and temperature) used in your process. Conclusion: For typical foam and cleaning agents the Ball valve 1/2", GW BSP, stainless steel, BALR is suitable and will not corrode or degrade under normal use, but check compatibility for highly aggressive chemicals or extreme conditions.

Is the Ball valve 1/2", GW BSP, stainless steel, BALR compatible with hot water and steam up to +95Â°C?

Yes. The Ball valve 1/2", GW BSP, stainless steel, BALR is compatible with hot water and steam up to +95Â°C. The product description specifies an operating temperature up to +95Â°C and materials (AISI 304 stainless steel and EPDM cover) suitable for use with water, cleaning agents and foam; working pressure is up to 60 bar.

How do I attach lances and nozzles to the Ball valve 1/2", GW BSP, stainless steel, BALR using quick couplings?

To attach lances and nozzles to the Ball valve 1/2", GW BSP, stainless steel, BALR using quick couplings, follow these steps: 1. Verify compatibility - Ensure the lance/nozzle assembly has a matching quick-coupling male or female adapter compatible with BSP threads or the specific quick-coupling system you use. The Ball valve 1/2", GW BSP, stainless steel, BALR has a BSP female thread and is designed for use with standard quick couplings for cleaning, foam and chemical applications. 2. Prepare components - Depressurize the system and isolate the valve. - Clean threads and coupling faces; remove dirt or debris. - Inspect seals and O-rings on the quick coupling and on the lance/nozzle; replace if worn. 3. Fit the quick coupling adapter (if required) - If your lance/nozzle uses a quick coupling that requires a threaded adapter, screw the appropriate BSP male adapter into the Ball valve 1/2", GW BSP, stainless steel, BALR female thread. Use appropriate thread sealant (PTFE tape or liquid thread sealant) rated for up to +95Â°C and the chemicals in use. Tighten securely but avoid overâtorquing to protect AISI 304 threads. 4. Connect the quick coupling - Pull back the collar or sleeve on the quick coupling mounted on the lance/nozzle or on the valve adapter. - Insert the mating coupling half fully into the valve-side coupling until it seats. - Release the collar/sleeve; you should hear or feel a click indicating the coupling locked. - Tug gently to confirm a secure connection. 5. Safety checks - Ensure the valveâs lever lock is engaged to prevent accidental opening by falling on the lever. - Open the valve slowly and check for leaks at the coupling and thread joints. - Confirm EPDM rubber cover is in place to protect valve body and floor. 6. Use and maintenance - After use, depressurize, disconnect by pulling back the coupling sleeve and separating halves. - Rinse and dry couplings and seals; store protected to prolong life. Following these steps ensures a secure, leakâfree connection of lances and nozzles to the Ball valve 1/2", GW BSP, stainless steel, BALR while maintaining safety and component longevity.

Ball valve 1/2″, BSP female, steel stainless, BALR

Additional information

Material	SS – stainless steel
Standard length [m]	60

Ball valve 1/2″ of steel stainless for multifunction use for water, agents cleaning, foam. can be used independently or with quick coupling enabling connection many types lances and nozzles. secured against opening valve through fall na its lever. has solid cover with rubber EPDM protecting valve and floor against damage in case fall. the connection: BSP female. Material: steel AISI 304. pressure working: up to 60 bar. temperature use: up to +95°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-BALR001-BL	Valve ball AKBO, rubber Cover, 2x 1/2" BSP female, AISI 304, blue	12	60	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Ball valve 1/2″ of steel stainless for multifunction use for water, agents cleaning, foam. can be used independently or with quick coupling enabling connection many types lances and nozzles. secured against opening valve through fall na its lever. has solid cover with rubber EPDM protecting valve and floor against damage in case fall. the connection: BSP female. Material: steel AISI 304. pressure working: up to 60 bar. temperature use: up to +95°C.