What is the temperature range and material specification for the KLAUDIA lever joint gasket, EPDM, type KMU intended for the socket of the KLAUDIA lever coupling?

The KLAUDIA lever joint gasket, EPDM, type KMU is made of EPDM rubber and is intended for the socket of the KLAUDIA lever coupling. Its operating temperature range is from â25Â°C to +60Â°C.

What installation and maintenance steps are recommended for the KLAUDIA lever joint gasket, EPDM, type KMU used in the KLAUDIA lever coupling socket?

Installation: Before fitting the KLAUDIA lever joint gasket, EPDM, type KMU, ensure mating surfaces of the KLAUDIA lever coupling socket are clean, dry and free of debris or old seal remnants. Inspect the gasket for damage or deformation. Lightly lubricate the gasket with a compatible, non-petroleum-based silicone or EPDM-safe lubricant to ease seating. Center the gasket in the socket groove and press evenly to avoid twisting or pinching. Reassemble the coupling following manufacturer torque and alignment recommendations. Maintenance: Regularly inspect the KLAUDIA lever joint gasket, EPDM, type KMU for cracks, hardening, compression set or chemical attack, especially after temperature extremes. Clean with mild soap and water; avoid solvents and petroleum products. Replace the gasket if any signs of wear or if it fails to maintain a proper seal. Store spare gaskets flat in a cool, dry place between -25Â°C and +60Â°C, away from direct sunlight and ozone sources.

Can the KLAUDIA lever joint gasket, EPDM, type KMU resist chemical exposure from cleaning agents used near the coupling?

It depends on the cleaning agents. EPDM (ethylene propylene diene monomer) is generally resistant to water, steam, many alkaline cleaners, and some oxidizing agents, but it is sensitive to many hydrocarbons, oils, solvents (e.g., petrol, mineral oils, ketones, aromatic hydrocarbons) and certain strong acids. Therefore chemical compatibility must be checked for the specific cleaning products used near the KLAUDIA lever joint gasket, EPDM, type KMU. Guidance: - Compatible or generally tolerated: hot and cold water, steam, polar solvents like glycols, many alkaline cleaners (depending on concentration), diluted inorganic acids at moderate concentrations, and common detergents. - Potentially harmful: petroleum-based solvents, oils, benzines, toluene, acetone, MEK, concentrated acids or strong oxidizers at high concentration/temperature, and certain disinfectants containing aggressive solvents. - Operating temperature range: -25Â°C to +60Â°C. Chemical resistance can deteriorate near the upper temperature limit; increased temperature accelerates degradation. Recommendation: 1. Identify the exact chemical composition (active ingredients, concentration, pH, solvents) of the cleaning agents. 2. Consult a detailed EPDM chemical compatibility chart or the gasket manufacturer for confirmation. 3. If uncertain, perform a sample exposure test on spare KLAUDIA lever joint gasket, EPDM, type KMU pieces under real-use temperature and exposure duration. 4. Rinse thoroughly with water after cleaning and avoid prolonged contact with aggressive solvents. Conclusion: The KLAUDIA lever joint gasket, EPDM, type KMU can resist many common cleaning agents, but not allâverify compatibility for your specific chemicals and conditions before use.

Gasket lever coupling KLAUDIA, EPDM, type KMU

All products, Lever couplings/

Additional information

Maximum operating temperature [°C]	60
Minimum operating temperature [°C]	-25

Gasket KMU intended for socket lever coupling KLAUDIA. Material: EPDM. Operating temperature: from -25°C to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
KL-KMU-051	Gasket coupling KLAUDIA 51 mm	-	-	In stock	Enquiry
KL-KMU-070	Gasket coupling KLAUDIA 70 mm	-	-	In stock	Enquiry
KL-KMU-089	Gasket coupling KLAUDIA 89 mm	-	-	In stock	Enquiry
KL-KMU-108	Gasket coupling KLAUDIA 108 mm	-	-	In stock	Enquiry
KL-KMU-133	Gasket coupling KLAUDIA 133 mm	-	-	In stock	Enquiry