What is the recommended maintenance interval for the GF series G compressed air filter with BSP female threads under typical operating conditions?

Under typical operating conditions, the recommended maintenance interval for the GF series G compressed air filter with BSP female threads is to inspect and service the unit every 3 months or every 2,000â3,000 operating hours, whichever comes first. This includes checking and cleaning or replacing the 40 Âµm filter element, verifying proper operation of the automatic condensate drain (A), and inspecting seals, mounting bracket, and connections (BSP 1/8"â1") for leaks. In harsher conditions (high contamination, elevated temperature up to +70Â°C, or near maximum supply pressure of 10 bar), shorten the interval to monthly or every 500â1,000 hours. After servicing, confirm flow performance corresponds to the size rating (e.g., 3,100 l/min for size 200 at 6 bar inlet, Îp = 1 bar) and that condensate is draining correctly.

How does the automatic condensate drain on the GF series G compressed air filter with BSP female threads operate and reset?

The automatic condensate drain on the GF series G compressed air filter with BSP female threads operates by sensing and removing collected condensate from the filter bowl without manual intervention. As compressed air flows through the GF series G compressed air filter with BSP female threads, water and oil condensate are separated and accumulate in the bowl. The automatic drain (A) discharges this accumulated liquid when a predetermined liquid level or pressure differential is reached, preventing carryover into the downstream system. Reset: after the condensate is expelled, the automatic drain returns to the closed position automatically, allowing the filter to rebuild the retained condensate until the next discharge cycle. The drain is designed to operate reliably within the productâs specified conditions (supply pressure up to 10 bar, operating temperature up to +70Â°C) and across available sizes (200, 300, 400, 600) and flow rates.

GF series G compressed air filter with BSP female threads

Q: How should I size the GF series G compressed air filter with BSP female threads for my system flow and pressure?

To size the GF series G compressed air filter with BSP female threads, follow these steps: 1. Determine your systemâs required flow rate (l/min) at operating pressure and allowable pressure drop (Îp). 2. Match the required flow to the filter size using the published flows (at inlet 6 bar, Îp = 1 bar): Size 200 = 3,100 l/min; Size 300 = 5,000 l/min; Size 400 = 7,500 l/min; Size 600 = 12,000 l/min. Choose the smallest size whose rated flow â¥ your system flow. 3. Verify supply pressure â¤ 10 bar and operating temperature â¤ +70Â°C. 4. Ensure filtration degree 40 Âµm meets contamination control needs and condensate drain automatic (A) is acceptable. 5. Confirm BSP connection size (1/8"â1") and use GA connection sets and mounting bracket as needed. If your operating pressure differs from 6 bar or you need lower Îp, select the next larger size for safety margin.

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	70

GF series G filter with BSP internal thread is used for removing contaminants contained in compressed air to ensure the proper operation of pneumatic system components. The package includes a mounting bracket. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Filtration degree: 40 µm. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: BSP 1/8″ to 1″. Condensate drain: automatic (A). Flow rate: 3100 l/min – size 200, 5000 l/min – size 300, 7500 l/min – size 400, 12000 l/min – size 600 (at inlet pressure 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AT-GF200-06	Filter FIL GF200 1/8 40 A	-	-	In stock	0 zł		Enquiry
AT-GF200-08	Filter FIL GF200 1/4 40 A	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

GF series G filter with BSP internal thread is used for removing contaminants contained in compressed air to ensure the proper operation of pneumatic system components. The package includes a mounting bracket. GA connection sets (L, T, U shapes) are used for connecting individual components. Size: 200, 300, 400, 600. Filtration degree: 40 µm. Supply pressure: up to 10 bar. Operating temperature: up to +70°C. Connection: BSP 1/8″ to 1″. Condensate drain: automatic (A). Flow rate: 3100 l/min – size 200, 5000 l/min – size 300, 7500 l/min – size 400, 12000 l/min – size 600 (at inlet pressure 6 bar Δp = 1 bar).