Is the Pipe clamp with DÃMMGULASTÂ® anti-vibration insert, galvanized steel suitable for outdoor use and resistant to corrosion in wet environments?

Yes. The Pipe clamp with DÃMMGULASTÂ® anti-vibration insert, galvanized steel is suitable for outdoor use and resistant to corrosion in wet environments. Reasoning from the product description: - Clamp material is carbon steel, galvanized (W1), providing a corrosion-resistant zinc coating appropriate for outdoor and wet conditions. - The DÃMMGULASTÂ® insert is EPDM rubber (water-, abrasion-, temperature- and aging-resistant), so the vibration-isolating part withstands moisture and outdoor exposure. - The product is proven in water and sewage installations and HVAC systems, and carries the RAL quality mark (sizes â¤200 mm) with testing and inspection requirements, plus fire-safety testing for sizes â¤170 mm (RAL-GZ 656), indicating suitability for demanding installations. Note: For highly aggressive environments (marine spray, long-term immersion in corrosive media, or chemical exposure), consider higher-grade materials or additional protective coatings and consult the manufacturer for specific exposure conditions.

How does the Pipe clamp with DÃMMGULASTÂ® anti-vibration insert, galvanized steel accommodate thermal expansion of different pipe materials?

The Pipe clamp with DÃMMGULASTÂ® anti-vibration insert, galvanized steel accommodates thermal expansion of different pipe materials through several features: the two locking screws with plastic washers permit controlled adjustment of clamp tightness and allow slight axial and radial movement as pipe diameter changes with temperature; the EPDM DÃMMGULASTÂ® insert is resilient, water-/temperature-/aging-resistant and cushions differential movement between clamp and pipe while maintaining grip; the insertâs elasticity reduces stress transfer to the pipe, enabling sliding or micro-movements without damage. The welded two-stage head (M8/M10) and robust two-part steel design provide secure mounting while permitting the necessary give for vertical, horizontal or suspended installations across steel, cast iron, copper and plastic pipes.

Can the Pipe clamp with DÃMMGULASTÂ® anti-vibration insert, galvanized steel be used in seismic or high-vibration industrial applications?

Yes. the Pipe clamp with DÃMMGULASTÂ® anti-vibration insert, galvanized steel is suitable for many seismic and high-vibration industrial applications, with some important considerations. Why it is suitable: - Designed for high dynamic loads: two-part strong steel construction and two locking screws (secured with plastic washers) provide secure fastening and adjustability for changing pipe diameters. - Vibration damping: DÃMMGULASTÂ® EPDM insert (yellow stripe) is water-, abrasion-, temperature- and aging-resistant and offers an average sound level improvement up to 22 dB(A), reducing transmitted vibration. - Versatile installation: rated for vertical, horizontal and suspended arrangements and compatible with steel, cast iron, copper and plastic pipes. - Quality and testing: carries the "GÃ¼tezeichen Rohrbefestigung" for sizes â¤200 mm and is inspected per RAL-GZ 655-B; sizes â¤170 mm additionally tested for fire safety (RAL-GZ 656). Galvanized carbon steel (W1) ensures corrosion protection. Considerations and limitations: - Verify size and load: ensure the chosen clamp size and insert type are rated for the specific dynamic loads, frequencies and displacement expected in your seismic/vibration scenario. - Seismic system design: clamps are one component of a seismic restraint system. check overall system layout, spacing, secondary restraints and local code/engineering requirements. - Regulatory compliance: confirm compliance with local seismic codes and project-specific standards; for extreme seismic events, consult a structural/mechanical engineer to validate clamp selection and attachment points. - Maximum certified sizes: RAL quality mark applies to sizes â¤200 mm (fire tests â¤170 mm); for larger diameters, verify equivalent testing/certification. Conclusion: The Pipe clamp with DÃMMGULASTÂ® anti-vibration insert, galvanized steel is a proven, vibration-capable solution for many industrial and seismic applications, provided you validate size, load capacity and system-level seismic requirements with an engineer and applicable codes.

Pipe clamp with DÄMMGULAST® anti-vibration insert, galvanized steel

Additional information

Material	CS – steel (cast iron)

High-quality, strong two-part steel clamp for high dynamic loads with DÄMMGULAST® anti-vibration insert and two locking screws secured with plastic washers to prevent falling out during tightening. The screws allow for adjustment to accommodate larger changes in pipe diameter. The anti-vibration insert with a yellow identification stripe (average sound level improvement of up to 22 dB(A)) is made of water-resistant, abrasion-resistant, temperature-resistant, and aging-resistant EPDM rubber. A two-stage head with M8/M10 thread size is welded onto one part of the clamp. The clamp is designed for installation in vertical, horizontal, or suspended arrangements for all types of pipes: steel, cast iron, copper, plastic. A proven solution in water and sewage installations, during the construction of heating, gas, ventilation, air conditioning systems, in residential and industrial buildings. The clamp is distinguished by the quality mark “Gütezeichen Rohrbefestigung” for sizes ≤200 mm and is subject to inspection according to the RAL-GZ 655-B instruction. Products with the RAL quality mark must fully meet the stringent requirements in accordance with the standards contained in RAL GZ 655. The clamp is tested for fire safety for sizes ≤170 mm (RAL-GZ 656). Clamp material: carbon steel, galvanized (W1). Insert material: EPDM.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-PCDY-014-020-W1	Clamp for pipe 14÷20 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-021-026-W1	Clamp for pipe 21÷26 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-026-030-W1	Clamp for pipe 26÷30 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-031-038-W1	Clamp for pipe 31÷38 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-040-047-W1	Clamp for pipe 40÷47 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-048-054-W1	Clamp for pipe 48÷54 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-054-060-W1	Clamp for pipe 54÷60 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-060-066-W1	Clamp for pipe 60÷66 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-068-073-W1	Clamp for pipe 68÷73 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-073-080-W1	Clamp for pipe 73÷80 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-082-087-W1	Clamp for pipe 82÷87 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-087-094-W1	Clamp for pipe 87÷94 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-099-104-W1	Clamp for pipe 99÷104 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-105-112-W1	Clamp for pipe 105÷112 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-112-118-W1	Clamp for pipe 112÷118 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-122-128-W1	Clamp for pipe 122÷128 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-132-137-W1	Clamp for pipe 132÷137 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-137-142-W1	Clamp for pipe 137÷142 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-142-148-W1	Clamp for pipe 142÷148 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-149-156-W1	Clamp for pipe 149÷156 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-159-164-W1	Clamp for pipe 159÷164 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-164-169-W1	Clamp for pipe 164÷169 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry
AB-PCDY-169-172-W1	Clamp for pipe 169÷172 mm with rubber insert, yellow strap, GW M8/M10, W1	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-quality, strong two-part steel clamp for high dynamic loads with DÄMMGULAST® anti-vibration insert and two locking screws secured with plastic washers to prevent falling out during tightening. The screws allow for adjustment to accommodate larger changes in pipe diameter. The anti-vibration insert with a yellow identification stripe (average sound level improvement of up to 22 dB(A)) is made of water-resistant, abrasion-resistant, temperature-resistant, and aging-resistant EPDM rubber. A two-stage head with M8/M10 thread size is welded onto one part of the clamp. The clamp is designed for installation in vertical, horizontal, or suspended arrangements for all types of pipes: steel, cast iron, copper, plastic. A proven solution in water and sewage installations, during the construction of heating, gas, ventilation, air conditioning systems, in residential and industrial buildings. The clamp is distinguished by the quality mark “Gütezeichen Rohrbefestigung” for sizes ≤200 mm and is subject to inspection according to the RAL-GZ 655-B instruction. Products with the RAL quality mark must fully meet the stringent requirements in accordance with the standards contained in RAL GZ 655. The clamp is tested for fire safety for sizes ≤170 mm (RAL-GZ 656). Clamp material: carbon steel, galvanized (W1). Insert material: EPDM.