Is the Adaptor 45Â° with GZ BSP/flange SAE 6000, carbon steel, type A123 compatible with hydraulic systems using 60Â° cone and O-ring flange sealing?

Yes. The Adaptor 45Â° with GZ BSP/flange SAE 6000, carbon steel, type A123 is compatible with hydraulic systems using a 60Â° cone and an O-ring flange sealing. It is specifically described as having an external BSP thread with 60Â° cone sealing and an SAE 6000 flange that accepts O-ring sealing (or another gasket in the flange groove). Made of carbon steel and galvanized, the fitting is designed for high-pressure hydraulic applications and supports both the 60Â° cone interface and the SAE 6000 Oâring flange interface as stated.

Does the Adaptor 45Â° with GZ BSP/flange SAE 6000, carbon steel, type A123 require specific torque values for proper 60Â° cone and O-ring sealing?

Yes. The Adaptor 45Â° with GZ BSP/flange SAE 6000, carbon steel, type A123 requires correct torque for reliable sealing: the BSP male 60Â° cone needs proper tightening to achieve metal-to-metal cone contact (follow manufacturer or ISO/BS torque guidance for the specific thread size), and the SAE 6000 flange requires correct bolt torque to compress the Oâring or flange gasket in the groove without overâcrushing it. Exact torque values depend on thread/flange size, bolt grade, lubrication and gasket type, so use the supplierâs or standard torque tables for the specific dimensions and materials to ensure proper 60Â° cone and Oâring sealing.

Can Adaptor 45Â° with GZ BSP/flange SAE 6000, carbon steel, type A123 be used with alternative gaskets in the SAE flange groove?

Yes. Adaptor 45Â° with GZ BSP/flange SAE 6000, carbon steel, type A123 is designed with an SAE 6000 flange that accommodates O-ring sealing or another gasket located in the flange groove. That means you can use an alternative gasket in the SAE flange groove provided the gasket: - matches the SAE 6000 flange groove dimensions and seating configuration, - is compatible with the working pressure, temperature and fluid media, - provides the required chemical and mechanical resistance (e.g., material compatibility, hardness/durometer), - allows proper compression without extruding or leaking under the clamping torque and flange face finish, - does not interfere with the BSP 60Â° cone sealing on the external thread side. Before installation, verify the alternative gasketâs certification and ratings for the intended service, check groove and gasket dimensions against SAE 6000 standards, and follow recommended flange bolting torque and surface condition. If in doubt, consult the gasket manufacturer or a qualified engineer to confirm suitability for the specific application.

Adaptor 45° with GZ BSP/flange SAE 6000, carbon steel, type A123

All products, High-pressure adapters/

Additional information

Material	CS – steel (cast iron)

Adaptor 45° high-pressure type A123 with external BSP thread (60° cone sealing) and SAE 6000 flange (O-ring sealing or other gasket in the flange groove). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A123-08	Adaptor 45° flange SAE 6000 1/2" / 1/2" BSP	-	350	In stock	Enquiry
TI-A123-12	Adaptor 45° flange SAE 6000 3/4" / 3/4" BSP	-	315	In stock	Enquiry
TI-A123-16	Adaptor 45° flange SAE 6000 1" / 1" BSP	-	250	In stock	Enquiry
TI-A123-20	Adaptor 45° flange SAE 6000 1.1/4" / 1.1/4" BSP	-	200	In stock	Enquiry
TI-A123-24	Adaptor 45° flange SAE 6000 1.1/2" / 1.1/2" BSP	-	160	In stock	Enquiry
TI-A123-32	Adaptor 45° flange SAE 6000 2" / 2" BSP	-	125	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Adaptor 45° high-pressure type A123 with external BSP thread (60° cone sealing) and SAE 6000 flange (O-ring sealing or other gasket in the flange groove). Material: carbon steel, galvanized.