Does the 45Â° INTERLOCK SAE 6000 flange end, carbon steel, support O-ring sealing for hose types 4SH, R13, and R15?

Yes. The 45Â° INTERLOCK SAE 6000 flange end, carbon steel supports O-ring sealing for hose types 4SH, R13, and R15. The flange features an O-ring seal or other gasket in the flange groove specifically to accommodate those hoses, and the carbon steel, galvanized construction provides the required durability and corrosion resistance for proper sealing.

Can 45Â° INTERLOCK SAE 6000 flange end, carbon steel use other gasket types besides an O-ring for hoses 4SH, R13, and R15?

Yes. The 45Â° INTERLOCK SAE 6000 flange end, carbon steel is designed with a groove that accepts an O-ring as the primary seal for hose types 4SH, R13, and R15, but alternative gasket types can be used if they fit the groove and meet pressure, temperature and fluid compatibility requirements. Common alternatives: flat ring gaskets (metal or composite) sized to the groove, spiral-wound gaskets with thin cross-sections, or elastomeric backup seals compatible with hydraulic fluids. Any substitute must maintain proper compression in the groove, resist extrusion at system pressures, and be compatible with the hose materials and galvanizing. Always verify manufacturer recommendations and perform pressure/chemical compatibility checks before substituting the O-ring.

Is an O-ring groove required on the 45Â° INTERLOCK SAE 6000 flange end, carbon steel, for hoses 4SH, R13, R15?

Yes. The 45Â° INTERLOCK SAE 6000 flange end, carbon steel for hose types 4SH, R13, and R15 requires an O-ring groove (or other gasket provision) in the flange face. The product description specifies âO-ring seal or other gasket in the flange groove,â which indicates the flange is designed to accept a grooved gasket sealing element. Use the groove-compatible O-ring or gasket specified for SAE 6000 flange faces and ensure material compatibility with the hose fluid and galvanizing. Proper groove dimensions and O-ring/gasket type should follow the SAE 6000 flange sealing standards and the hose/manufacturer recommendations to achieve reliable, leak-free assembly.

45° INTERLOCK SAE 6000 flange end, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

45° INTERLOCK SAE 6000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ILSK312-12-12	End fitting 45° INTERLOCK SAE 6000 3/4", hose 3/4"	20	-	In stock	Enquiry
TI-ILSK312-12-16	End fitting 45° INTERLOCK SAE 6000 3/4", hose 1"	25	-	In stock	Enquiry
TI-ILSK312-16-12	End fitting 45° INTERLOCK SAE 6000 1", hose 3/4"	20	-	In stock	Enquiry
TI-ILSK312-16-16	End fitting 45° INTERLOCK SAE 6000 1", hose 1"	25	-	In stock	Enquiry
TI-ILSK312-16-20	End fitting 45° INTERLOCK SAE 6000 1", hose 1.1/4"	32	-	In stock	Enquiry
TI-ILSK312-20-16	End fitting 45° INTERLOCK SAE 6000 1.1/4", hose 1"	25	-	In stock	Enquiry
TI-ILSK312-20-20	End fitting 45° INTERLOCK SAE 6000 1.1/4", hose 1.1/4"	32	-	In stock	Enquiry
TI-ILSK312-24-20	End fitting 45° INTERLOCK SAE 6000 1.1/2", hose 1.1/4"	32	-	In stock	Enquiry
TI-ILSK312-24-24	End fitting 45° INTERLOCK SAE 6000 1.1/2", hose 1.1/2"	38	-	In stock	Enquiry
TI-ILSK312-32-32	End fitting 45° INTERLOCK SAE 6000 2", hose 2"	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

45° INTERLOCK SAE 6000 flange end, O-ring seal or other gasket in the flange groove, for hose type 4SH, R13, and R15. Material: carbon steel, galvanized.