Is the T-piece 45Â° KTSB 45, galvanized steel compatible with standard suction hoses and BC screw bridge clamps for quick installation?

Yes. The T-piece 45Â° KTSB 45, galvanized steel is designed specifically for quick and efficient installation of suction hoses using BC screw bridge clamps, and its galvanized steel construction ensures standard dimensions and durability. It is compatible with standard suction hoses and BC screw bridge clamps for fast, secure assembly.

Can T-piece 45Â° KTSB 45, galvanized steel be used with different BC screw bridge clamp sizes for varying suction hose diameters?

Yes. T-piece 45Â° KTSB 45, galvanized steel is designed to accept BC screw bridge clamps, so you can use different clamp sizes to accommodate varying suction hose diameters. Ensure each clamp matches the hose outer diameter and provides sufficient compression to form a secure, leak-free connection. Verify clamp width and thread capacity are compatible with the T-piece flange/profile to avoid uneven pressure or damage. For best performance, choose clamps rated for the operating pressure and environmental conditions; if hose diameters vary widely, use appropriately sized clamps or adapters to maintain a tight seal.

Does T-piece 45Â° KTSB 45, galvanized steel require special BC screw bridge clamps for secure suction hose attachment?

Yes. The 45Â° T-piece 45Â° KTSB 45, galvanized steel is specifically designed for quick and secure installation of suction hoses using BC screw bridge clamps. The product description indicates compatibility and intended use with BC screw bridge clamps, so for reliable sealing and mechanical retention you should use those clamps (or equivalent clamps specified by the manufacturer). Using the recommended BC screw bridge clamps ensures proper hose fit, prevents leaks and slippage under vacuum or pressure, and maintains the installationâs safety and performance.

Tee 45° KTSB 45, steel galvanized

All products, Ducting and ventilation hoses/

Additional information

Material	CS – steel (cast iron)

Tee 45° KTSB 45 intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
KS-KTSB45-080-OC	Tee 45° d = 77 mm, galvanized steel	80	-	In stock	Enquiry
KS-KTSB45-100-OC	Tee 45° d = 97 mm, galvanized steel	100	-	In stock	Enquiry
KS-KTSB45-125-OC	Tee 45° d = 122 mm, galvanized steel	125	-	In stock	Enquiry
KS-KTSB45-140-OC	Tee 45° d = 137 mm, galvanized steel	140	-	In stock	Enquiry
KS-KTSB45-150-OC	Tee 45° d = 147 mm, galvanized steel	150	-	In stock	Enquiry
KS-KTSB45-160-OC	Tee 45° d = 157 mm, galvanized steel	160	-	In stock	Enquiry
KS-KTSB45-180-OC	Tee 45° d = 177 mm, galvanized steel	180	-	In stock	Enquiry
KS-KTSB45-200-OC	Tee 45° d = 197 mm, galvanized steel	200	-	In stock	Enquiry
KS-KTSB45-225-OC	Tee 45° d = 222 mm, galvanized steel	225	-	In stock	Enquiry
KS-KTSB45-250-OC	Tee 45° d = 247 mm, galvanized steel	250	-	In stock	Enquiry
KS-KTSB45-280-OC	Tee 45° d = 277 mm, galvanized steel	275	-	In stock	Enquiry
KS-KTSB45-300-OC	Tee 45° d = 297 mm, galvanized steel	300	-	In stock	Enquiry
KS-KTSB45-400-OC	Tee 45° d = 397 mm, galvanized steel	400	-	In stock	Enquiry
KS-KTSB45-500-OC	Tee 45° d = 497 mm, galvanized steel	500	-	In stock	Enquiry