Is the 90Â° angle plug connector with BSPT male thread, stainless steel, AI-60110 compatible with food and pharmaceutical sterilization processes?

Yes . the 90Â° angle plug connector with BSPT male thread, stainless steel, AI-60110 is suitable for many food and pharmaceutical sterilization processes, with some caveats. Why itâs suitable: - Material: AISI 316L stainless steel is widely accepted for food and pharmaceutical use because of its corrosion resistance and cleanability. - No plastics: The connector contains no plastic components, minimizing contamination risk and allowing higher-temperature treatments. - Seals: Viton seals provide excellent chemical resistance and can tolerate a wide range of sterilants. - Temperature and pressure: Rated -15Â°C to +225Â°C and 15 bar, compatible with common sterilization methods such as steam-in-place (SIP) and many chemical sterilants (provided the temperature/pressure fall within ratings). Caveats and limitations: - Steam sterilization: Typical autoclave/SIP steam cycles can approach or exceed 121â134Â°C, which is within the 225Â°C rating; however, repeated high-temperature steam over long durations can degrade elastomers. Verify Viton compatibility with your specific steam cycle and duration. - Aggressive sterilants: Some sterilizing agents (e.g., strong oxidizers like concentrated peracetic acid or sodium hypochlorite at high concentrations) can attack Viton or stainless steel over time. Confirm chemical compatibility for your exact sterilant concentrations and exposure times. - Regulatory/cleanability requirements: For pharmaceutical aseptic processes, surface finish (Ra), cleaning validation and regulatory documentation (e.g., FDA/USP compliance) may be required; these details are not provided in the description and must be confirmed. - Vacuum/pressure cycles: Ensure the 0.99 bar vacuum and 15 bar pressure ratings match your process cycles. Recommendation: For final acceptance, validate with your QA/engineering team: confirm Viton compatibility with chosen sterilant and cycle, verify surface finish and traceability/regulatory requirements, and perform cleaning/sterilization validation tests.

Does the 90Â° angle plug connector with BSPT male thread, stainless steel, AI-60110 withstand autoclave sterilization cycles?

Yes. The 90Â° angle plug connector with BSPT male thread, stainless steel, AI-60110 is constructed entirely of AISI 316L stainless steel (no plastic parts) and uses Viton seals. AISI 316L is broadly compatible with autoclave conditions (typically ~121â134Â°C, saturated steam, high humidity), and Viton tolerates continuous temperatures up to ~200â220Â°C and resists steam and many chemicals. Given the stated operating temperature range (â15Â°C to +225Â°C) and materials, the AI-60110 is suitable for repeated autoclave sterilization cycles at standard temperatures/pressures. Verify compatibility with your specific autoclave cycle profile and any regulatory/cleanroom requirements for your medical/pharmaceutical application.

Can the 90Â° angle plug connector with BSPT male thread, stainless steel, AI-60110 be used in corrosive chemical environments?

Yes. The 90Â° angle plug connector with BSPT male thread, stainless steel, AI-60110 is suitable for corrosive chemical environments. It is made entirely of AISI 316L stainless steel, a material known for excellent corrosion resistance against many acids, alkalis and salts. The connector contains no plastic components, and its seals are made of Viton (FKM), a fluorocarbon elastomer with strong chemical resistance to oils, fuels, many solvents and aggressive chemicals. Rated operating temperature (-15Â°C to +225Â°C) and working pressure (15 bar) cover a wide range of industrial conditions, and the product is specified for use in chemical, food, pharmaceutical, electronic and medical industries. Limitations: compatibility depends on the specific chemical, concentration and temperature. Extremely aggressive media (e.g., hot concentrated chlorides, strong oxidizers like aqua regia or some fluorinated compounds) can attack stainless steel or Viton. For vacuum applications note the vacuum rating (0.99 bar). For critical or prolonged exposure, consult chemical compatibility charts for AISI 316L and Viton or contact the manufacturer to confirm suitability for your exact medium and operating conditions.

90° angle plug connector with BSPT male thread, stainless steel, AI-60110

All products, Push-in fittings/

Additional information

Material	SS – stainless steel

High-quality 90° angled connection with external BSPT thread, made entirely of AISI 316L steel, series 60110. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic, and medical industries. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AI-60110-04-02	Adjustable angle connector, 4 mm hose, GZ 1/8" BSPT, AISI 316L	-	15	In stock	Enquiry
AI-60110-04-04	Adjustable angle connector, 4 mm hose, GZ 1/4" BSPT, AISI 316L	-	15	In stock	Enquiry
AI-60110-06-02	Adjustable angle connector, hose 6 mm, GZ 1/8" BSPT, AISI 316L	-	15	In stock	Enquiry
AI-60110-06-04	Adjustable angle connector, hose 6 mm, GZ 1/4" BSPT, AISI 316L	-	15	In stock	Enquiry
AI-60110-08-02	Adjustable angle connector, hose 8 mm, GZ 1/8" BSPT, AISI 316L	-	15	In stock	Enquiry
AI-60110-08-04	Adjustable angle connector, hose 8 mm, GZ 1/4" BSPT, AISI 316L	-	15	In stock	Enquiry
AI-60110-10-04	Adjustable angle connector, hose 10 mm, GZ 1/4" BSPT, AISI 316L	-	15	In stock	Enquiry
AI-60110-10-06	Adjustable angle connector, hose 10 mm, GZ 3/8" BSPT, AISI 316L	-	15	In stock	Enquiry
AI-60110-10-08	Adjustable angle connector, hose 10 mm, GZ 1/2" BSPT, AISI 316L	-	15	In stock	Enquiry
AI-60110-12-06	Adjustable angle connector, hose 12 mm, GZ 3/8" BSPT, AISI 316L	-	15	In stock	Enquiry
AI-60110-12-08	Adjustable angle connector, hose 12 mm, GZ 1/2" BSPT, AISI 316L	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-quality 90° angled connection with external BSPT thread, made entirely of AISI 316L steel, series 60110. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic, and medical industries. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.