Is the 90Â° elbow with BSP female/BSPT male thread, cast iron, type 92/7 suitable for continuous service at +300Â°C and 20 bar?

Yes. The 90Â° elbow with BSP female/BSPT male thread, cast iron, type 92/7 is specified for continuous service up to +300Â°C with a working pressure of 20 bar at that temperature. The product description lists operating temperature up to +300Â°C and gives working pressure ratings of 25 bar (up to +120Â°C) and 20 bar (up to +300Â°C), so using it continuously at +300Â°C and 20 bar falls within the stated limits. Ensure thread compatibility (BSP internal / BSPT external), proper installation, and consider any additional application-specific factors (corrosion, cyclic loading, thermal expansion, and applicable standards) that might affect long-term performance.

Can the 90Â° elbow with BSP female/ BSPT male thread, cast iron, type 92/7 be used at 25 bar up to +120Â°C and reduced pressure at higher temperatures?

Yes. The 90Â° elbow with BSP female/ BSPT male thread, cast iron, type 92/7 can be used at 25 bar up to +120Â°C. At higher temperatures it must be used at reduced pressure: 20 bar up to +300Â°C, per the productâs operating limits. Ensure installation and service conditions (media, thermal cycling, thread sealing) comply with these ratings.

Does the 90Â° elbow with BSP female/ BSPT male thread, cast iron, type 92/7 meet pressure/temperature safety standards for industrial piping?

90Â° elbow with BSP female/ BSPT male thread, cast iron, type 92/7 does meet common industrial pressure/temperature safety expectations within the stated limits, but only where those limits align with the installationâs requirements and applicable codes. Given the provided data. material ductile iron, operating temperature up to +300Â°C, working pressure 25 bar up to +120Â°C and 20 bar up to +300Â°C. the fitting is suitable for services that do not exceed those pressures at the corresponding temperatures. However, compliance with safety standards in an industrial installation requires more than matching pressure/temperature ratings: - Verify the componentâs certification and traceability (e.g., CE, PED for EU, or applicable regional approvals). - Confirm compatibility with the fluid, corrosion resistance and erosion behavior of ductile iron at temperature. - Ensure threads (BSP female / BSPT male) and joint assembly meet leakage and mechanical-strength requirements; use correct sealing methods and verify thread class/tolerance. - Check system design factors (safety factor, transient/hammer pressures, cyclic loading, thermal expansion) so actual peak pressures and temperatures remain within the fittingâs allowable envelope. - Follow relevant codes/standards (e.g., EN, ASME B31.1/B31.3, PED) and local regulations; pressure equipment directives may require conformity assessment. - Consider inspection, testing, and maintenance regimes (pressure testing, periodic inspection). Conclusion: 90Â° elbow with BSP female/ BSPT male thread, cast iron, type 92/7 is acceptable for use only if the installationâs maximum operating conditions, fluid compatibility, and applicable regulatory/certification requirements do not exceed the specified 25 bar (â¤+120Â°C) and 20 bar (â¤+300Â°C) limits and all installation and inspection requirements are met.

90° elbow with BSP female/ BSPT male thread, cast iron, type 92/7

Additional information

Material	CS – steel (cast iron)

90° elbow with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EE-927-04	90° elbow with GW BSP / GZ BSPT 1/4", galvanized cast iron.	-	25	In stock	Enquiry
EE-927-06	90° elbow with GW BSP / GZ BSPT 3/8", galvanized cast iron.	-	25	In stock	Enquiry
EE-927-08	90° elbow with GW BSP / GZ BSPT 1/2", galvanized cast iron.	-	25	In stock	Enquiry
EE-927-12	90° elbow with GW BSP / GZ BSPT 3/4", galvanized cast iron.	-	25	In stock	Enquiry
EE-927-16	90° elbow with GW BSP / GZ BSPT 1", galvanized cast iron.	-	25	In stock	Enquiry
EE-927-20	90° elbow with GW BSP / GZ BSPT 1.1/4", galvanized cast iron.	-	25	In stock	Enquiry
EE-927-24	90° elbow with GW BSP / GZ BSPT 1.1/2", galvanized cast iron.	-	25	In stock	Enquiry
EE-927-32	90° elbow with GW BSP / GZ BSPT 2", galvanized cast iron.	-	25	In stock	Enquiry
EE-927-40	90° elbow with GW BSP / GZ BSPT 2.1/2", galvanized cast iron.	-	25	In stock	Enquiry
EE-927-48	90° elbow with GW BSP / GZ BSPT 3", galvanized cast iron.	-	25	In stock	Enquiry
EE-927-64	90° elbow with GW BSP / GZ BSPT 4", galvanized cast iron.	-	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° elbow with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).