Is the Barrel adaptor with GZ/GW BSP, polypropylene safe for food-grade liquids and compatible with standard 200L plastic barrels?

Barrel adaptor with GZ/GW BSP, polypropylene . Yes. The adaptor is made of high-quality polypropylene reinforced with fiberglass and is explicitly described as food-safe, so it is suitable for food-grade liquids. The sealing element is low-density polyethylene (LDPE), a common food-contact polymer. Operating temperature range is -10Â°C to +70Â°C (short-term up to +80Â°C), so it is appropriate for typical food and beverage temperatures within that range. Compatibility with standard 200L plastic barrels . Yes. The product is intended for use with the most popular and commonly used 200-liter plastic barrels and provides a tight connection on the external thread DIN EN 12713 using an O-ring seal. It is designed to facilitate installation of suction pumps or ball valves (taps), so it should fit standard 200L plastic barrels that use DIN EN 12713 threads. Notes/caveats: Verify that your specific barrel has the DIN EN 12713 external thread and that your applicationâs maximum temperature and any chemical exposures are within the materialsâ limits. For regulatory compliance, confirm any local food-contact certifications if required.

Can the Barrel adaptor with GZ/GW BSP, polypropylene withstand repeated temperature cycling between -10Â°C and +70Â°C without seal failure?

Barrel adaptor with GZ/GW BSP, polypropylene Format: Based on the specification, the adaptor body (glass-fiber reinforced polypropylene) and the LDPE O-ring are rated for an operating range of -10Â°C to +70Â°C (temporary up to +80Â°C). Under normal conditions within this range, the materials are suitable for repeated temperature cycling and should maintain seal integrity. However, repeated thermal cycling can accelerate polymer ageing, embrittlement or compression set in the LDPE O-ring over time, especially near the range limits or with chemical exposure/mechanical stress. For reliable long-term leak-proof performance under frequent cycles, periodic inspection and replacement of the LDPE seal is recommended; consider using a more temperature-resistant elastomer if cycles are frequent or duty is critical.

Does the Barrel adaptor with GZ/GW BSP, polypropylene fit barrels with DIN EN 12713 external threads?

Yes. The Barrel adaptor with GZ/GW BSP, polypropylene is explicitly designed to provide a tight connection on external thread DIN EN 12713 using an O-ring seal, so it fits barrels with DIN EN 12713 external threads. The materials (fiberglass-reinforced polypropylene body and LDPE seal) and specified temperature range (-10Â°C to +70Â°C, temporarily up to +80Â°C) support typical use with 200 L plastic barrels and installation of pumps or ball valves.

Barrel adaptor with GZ/GW BSP, polypropylene

Additional information

Material	P – material (plastic)

Adaptor made of high-quality polypropylene reinforced with fiberglass, food-safe, intended for use with the most popular and commonly used plastic barrels for storing raw materials (200 liters). Designed to facilitate the installation of, for example, a suction pump or ball valve (tap). A tight connection on the external thread DIN EN 12713 is guaranteed by an O-ring seal. Material: polypropylene reinforced with fiberglass. Seal: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (temporarily up to +80°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-IDM056-F075	Adapter for barrel GZ S56x4 with 3/4" BSP thread	-	-	In stock	Enquiry
AC-IDM056-F200	Adapter for barrel GZ S56x4 with 2" BSP thread	-	-	In stock	Enquiry
AC-IDM064-F075	Adapter for barrel GZ S64x5 with 3/4" BSP thread	-	-	In stock	Enquiry
AC-IDM064-F200	Adapter for barrel GZ S64x5 with 2" BSP thread	-	-	In stock	Enquiry
AC-IDM070-F075	Adapter for barrel GZ S70x6 with 3/4" BSP thread	-	-	In stock	Enquiry
AC-IDM070-F200	Adapter for barrel GZ S70x6 with 2" BSP thread	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Adaptor made of high-quality polypropylene reinforced with fiberglass, food-safe, intended for use with the most popular and commonly used plastic barrels for storing raw materials (200 liters). Designed to facilitate the installation of, for example, a suction pump or ball valve (tap). A tight connection on the external thread DIN EN 12713 is guaranteed by an O-ring seal. Material: polypropylene reinforced with fiberglass. Seal: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (temporarily up to +80°C).