Is the Adaptor - nipple GZ BSPT x GZ METRIC, carbon steel, type A602 compatible with hydraulic systems using 60Â° cone sealing?

Adaptor - nipple GZ BSPT x GZ METRIC, carbon steel, type A602 is only partially compatible with hydraulic systems using 60Â° cone sealing. According to the description, the adapter features an external BSPT thread with sealing on the thread (tapered thread seal) and an external metric thread that seals via a 60Â° cone. The metric end is therefore designed to mate with a 60Â° cone seat, so it will provide proper cone sealing on systems that use a 60Â° cone interface. However, the BSPT end seals on the thread itself (taper seal), not via a cone, so it will not provide a 60Â° cone seal on that side. Ensure the mating components match: the metric female port must have a 60Â° cone seat and the BSPT female must accept thread sealing. Also confirm pressure ratings and material compatibility (galvanized carbon steel) for your hydraulic fluid and system conditions before use.

Can Adaptor - nipple GZ BSPT x GZ METRIC, carbon steel, type A602 be used with fittings that require thread-end sealing on BSPT?

Yes. Adaptor - nipple GZ BSPT x GZ METRIC, carbon steel, type A602 can be used with fittings that require thread-end sealing on BSPT: the A602 features an external BSPT thread designed to seal on the thread (tapered BSPT sealing), while the external metric thread seals via a 60Â° cone. Ensure the mating BSPT female fitting is intended for thread-end (taper) sealing and that pressure, material compatibility (galvanized carbon steel), and sealing method match your system requirements.

Does Adaptor - nipple GZ BSPT x GZ METRIC, carbon steel, type A602 require additional seals for BSPT threads?

Adaptor - nipple GZ BSPT x GZ METRIC, carbon steel, type A602 does not require additional seals for the BSPT thread. The product description states the high-pressure adapter has an external BSPT thread with a seal on the thread (i.e., the BSPT connection is designed to seal via the threaded taper). The external metric thread uses a 60Â° cone seal, so only the metric side requires the corresponding cone-sealing mating surface or sealing element. Ensure proper thread engagement and tightening torque per manufacturer recommendations; use sealing compound or tape only if specifically advised by the manufacturer for assembly or for additional corrosion protection, but it is not required for the BSPT taper to achieve the seal.

Adaptor – nipple GZ BSPT x GZ METRIC, carbon steel, type A602

All products, High-pressure adapters/

Additional information

Material	CS – steel (cast iron)

High-pressure adapter type A602 with external BSPT thread (seal on the thread) and external metric thread (seal cone 60°). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A602-04-14	Adapter GZ BSPT 1/4" / GZ M14x1.5	-	350	In stock	Enquiry
TI-A602-06-16	Adapter GZ BSPT 3/8" / GZ M16x1.5	-	250	In stock	Enquiry
TI-A602-06-18	Adapter GZ BSPT 3/8" / GZ M18x1.5	-	250	In stock	Enquiry
TI-A602-08-22	Adaptor GZ BSPT 1/2" / GZ M22x1.5	-	225	In stock	Enquiry
TI-A602-12-26	Adapter GZ BSPT 3/4" / GZ M26x1.5	-	200	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-pressure adapter type A602 with external BSPT thread (seal on the thread) and external metric thread (seal cone 60°). Material: carbon steel, galvanized.