Is the Adaptor - reduction GZ x GW METRIC, carbon steel, type A702 compatible with hydraulic systems using 60Â° cone seal fittings?

Yes. Adaptor - reduction GZ x GW METRIC, carbon steel, type A702 is compatible with hydraulic systems that use 60Â° cone seal fittings. The type A702 is described as a high-pressure adapter with an external metric thread (60Â° cone seal) and an internal metric thread, and is made of carbon steel, galvanized. The external 60Â° cone face provides the mating surface required for 60Â° cone seal connections, while the internal metric thread accepts the corresponding male/female metric counterpart. Being specified for high-pressure use and made of carbon steel (galvanized) indicates suitable strength and corrosion protection for typical hydraulic applications. Ensure thread sizes, pressure rating, and thread form match the system components and verify compatibility with seals and operating fluid to guarantee leak-free performance.

Can Adaptor - reduction GZ x GW METRIC, carbon steel, type A702 be used with external metric threads and internal metric threads in high-pressure systems?

Adaptor - reduction GZ x GW METRIC, carbon steel, type A702 can be used in high-pressure systems if both the external metric thread (60Â° cone seal) and the internal metric thread are correctly matched, properly sealed, and the assembly complies with the systemâs pressure rating. The carbon steel, galvanized construction provides good mechanical strength, but suitability depends on: 1) pressure rating of A702 (verify manufacturerâs max working pressure), 2) correct mating threads and cone seal seating (60Â° cone must match counterpart), 3) use of appropriate sealing method and torque to prevent leaks, 4) compatibility with fluid and corrosion conditions despite galvanization, and 5) adherence to applicable standards and safety factors. If any of these are uncertain, consult manufacturer datasheet or engineering authority before use.

Does Adaptor - reduction GZ x GW METRIC, carbon steel, type A702 require specific torque values for 60Â° cone connections?

Adaptor - reduction GZ x GW METRIC, carbon steel, type A702 does not include specific torque values in the provided description. The item is described as a high-pressure adapter type A702 with an external metric thread (60Â° cone seal) and an internal metric thread, made of carbon steel, galvanized. For 60Â° cone (JIC/metric cone) connections, sealing is achieved by metal-to-metal contact at the cone, and proper assembly typically requires controlled tightening to ensure adequate contact without overstressing threads. Recommended practice: - Follow the thread and fitting manufacturerâs torque specifications when available. - If no torque spec is provided, use hydraulic fitting torque guidelines based on thread size and material (carbon steel). Typical torque ranges for similar 60Â° cone metric fittings are often found in hose/fitting catalogs or standards. - Use a calibrated torque wrench and tighten progressively: hand-tighten, then apply final torque in stages. - If possible, consult the system designer, supplier, or relevant standard (e.g., ISO or SAE documents) for exact torque values and ensure compatibility with pressure rating and sealing requirements. Without explicit torque data in the product description, determining a precise torque value requires reference to manufacturer tables, thread size, and application specifics.

Adapter – reducer male x metric female, carbon steel, type A702

All products, High-pressure adapters/

Additional information

Material	CS – steel (cast iron)

High-pressure adapter type A702 with metric male thread (60° cone sealing) and with metric female thread. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-A702-10-10	Adapter M10x1 male / M10x1 female	-	400	In stock	Enquiry
TI-A702-12-12	Adapter M12x1.5 male / M12x1.5 female	-	400	In stock	Enquiry
TI-A702-14-12	Adapter M14x1.5 male / M12x1.5 female	-	400	In stock	Enquiry
TI-A702-14-14	Adapter M14x1.5 male / M14x1.5 female	-	400	In stock	Enquiry
TI-A702-14-16	Adapter M14x1.5 male / M16x1.5 female	-	400	In stock	Enquiry
TI-A702-16-14	Adapter M16x1.5 male / M14x1.5 female	-	400	In stock	Enquiry
TI-A702-16-16	Adapter M16x1.5 male / M16x1.5 female	-	400	In stock	Enquiry
TI-A702-16-18	Adapter M16x1.5 male / M18x1.5 female	-	400	In stock	Enquiry
TI-A702-18-16	Adapter M18x1.5 male / M16x1.5 female	-	400	In stock	Enquiry
TI-A702-18-18	Adapter M18x1.5 male / M18x1.5 female	-	400	In stock	Enquiry
TI-A702-20-20	Adapter M20x1.5 male / M20x1.5 female	-	350	In stock	Enquiry
TI-A702-22-22	Adapter M22x1.5 male / M22x1.5 female	-	350	In stock	Enquiry
TI-A702-26-26	Adapter M26x1.5 male / M26x1.5 female	-	315	In stock	Enquiry