Is the Adaptor from GZ BSPT/GZ BSP, stainless steel, type A102 compatible with both AISI 316L and AISI 304 media-contact applications?

Yes. The Adaptor from GZ BSPT/GZ BSP, stainless steel, type A102 is listed as being made from AISI 316L and AISI 304 steel and therefore can be used in media-contact applications that require either AISI 316L or AISI 304 materials. Ensure you select the specific variant (316L or 304) that matches your corrosion resistance and regulatory needs; AISI 316L offers superior corrosion resistance (especially to chlorides) compared with AISI 304. Also verify compatibility with temperature, pressure, and any relevant sanitary or industry-specific certifications for your application.

Can the Adaptor from GZ BSPT/GZ BSP, stainless steel, type A102 be used in corrosive environments with AISI 316L or AISI 304?

Yes. The Adaptor from GZ BSPT/GZ BSP, stainless steel, type A102 is available in AISI 316L and AISI 304, so it can be used in corrosive environments provided the corrosion resistance of the chosen grade matches the specific medium and conditions. AISI 316L offers superior resistance to chlorides and many chemical agents compared with AISI 304 and is the preferred choice for more aggressive or chloride-containing environments. Consider temperature, concentration, crevice or stress corrosion risks, and compatibility with seal materials; for highly corrosive or oxidizing media, or where pitting/crevice corrosion is a concern, specify AISI 316L and validate via application-specific corrosion testing or consult materials engineer.

Does the Adaptor from GZ BSPT/GZ BSP, stainless steel, type A102 meet industry standards for food or pharmaceutical use with AISI 316L/304?

Adaptor from GZ BSPT/GZ BSP, stainless steel, type A102 is made of AISI 316L and AISI 304 stainless steel, which are common base materials used in food and pharmaceutical industries. However, meeting industry standards for food or pharmaceutical use depends on more than just the alloy designation: - AISI 316L: Generally preferred for pharmaceutical and many food applications due to improved corrosion resistance and lower carbon content (better weldability and reduced sensitization). Widely accepted when surface finish, traceability and proper processing are documented. - AISI 304: Used in food industry for many non-critical applications but less resistant to corrosion and chemical attack than 316L; it may not be acceptable for certain pharmaceutical processes or aggressive cleaning regimes. Other critical factors to determine suitability: - Surface finish (Ra, electropolishing): Food/pharma often require smooth, cleanable finishes; threaded fittings with sealing cones may create crevices that are harder to sanitize. - Cleanliness and passivation: Proper pickling/passivation removes contaminants and enhances corrosion resistance; certificate needed. - Traceability and material certification: EN 10204 3.1/3.2 or equivalent material certificates are typically required. - Compliance with relevant standards/regulations: e.g. FDA for food contact (US), EC 1935/2004 (EU), USP Class VI, 3-A sanitary standards, or EHEDG guidance for hygienic design, depending on application. - Design hygienicity: Threaded connections (BSPT/BSP) are not inherently hygienic; sealing on thread and cone 60Â° may still leave crevices and are often unsuitable for sterile/pharmaceutical product contact or high-cleanability food lines without additional sanitary design features. - Cleaning and sterilization compatibility: Compatibility with CIP/SIP procedures, cleaning agents and temperatures must be verified. Conclusion: Adaptor from GZ BSPT/GZ BSP, stainless steel, type A102 uses AISI 316L and AISI 304, which can be acceptable materials for food or pharmaceutical use, but the adaptor as described (threaded BSPT/BSP, cone seal) does not by itself guarantee compliance. You need documented surface finish, passivation, material certificates, and confirmation of conformity with the specific food/pharma standards and hygienic design requirements for your intended application.

Adaptor from GZ BSPT/GZ BSP, stainless steel, type A102

All products, High-pressure adapters/

Additional information

Material	SS – stainless steel

High-pressure adaptor type A102 with external BSPT thread (seal on the thread) and external BSP thread (seal cone 60°). Material: AISI 316L and AISI 304 steel.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
TI-A102-02-02-SS	Adaptor GZ BSPT 1/8" / GZ BSP 1/8", AISI 316	-	350
TI-A102-02-04-SS	Adaptor GZ BSPT 1/8" / GZ BSP 1/4", AISI 316	-	350
TI-A102-04-02-SS	Adaptor GZ BSPT 1/4" / GZ BSP 1/8", AISI 316	-	350
TI-A102-04-04-SS	Adaptor GZ BSPT 1/4" / GZ BSP 1/4", AISI 316	-	350
TI-A102-04-04-SS304	Adaptor GZ BSPT 1/4" / GZ BSP 1/4", AISI 304	-	350
TI-A102-04-06-SS	Adaptor GZ BSPT 1/4" / GZ BSP 3/8", AISI 316	-	250
TI-A102-04-06-SS304	Adaptor GZ BSPT 1/4" / GZ BSP 3/8", AISI 304	-	250
TI-A102-04-08-SS	Adaptor GZ BSPT 1/4" / GZ BSP 1/2", AISI 316	-	225
TI-A102-04-12-SS	Adaptor GZ BSPT 1/4" / GZ BSP 3/4", AISI 316	-	200
TI-A102-06-04-SS	Adaptor GZ BSPT 3/8" / GZ BSP 1/4", AISI 316	-	250
TI-A102-06-06-SS	Adaptor GZ BSPT 3/8" / GZ BSP 3/8", AISI 316	-	250
TI-A102-06-08-SS	Adaptor GZ BSPT 3/8" / GZ BSP 1/2", AISI 316	-	225
TI-A102-08-04-SS	Adaptor GZ BSPT 1/2" / GZ BSP 1/4", AISI 316	-	225
TI-A102-08-06-SS	Adaptor GZ BSPT 1/2" / GZ BSP 3/8", AISI 316	-	225
TI-A102-08-08-SS	Adaptor GZ BSPT 1/2" / GZ BSP 1/2", AISI 316	-	225
TI-A102-08-12-SS	Adaptor GZ BSPT 1/2" / GZ BSP 3/4", AISI 316	-	200
TI-A102-12-04-SS	Adaptor GZ BSPT 3/4" / GZ BSP 1/4", AISI 316	-	200
TI-A102-12-06-SS	Adaptor GZ BSPT 3/4" / GZ BSP 3/8", AISI 316	-	200
TI-A102-12-08-SS	Adaptor GZ BSPT 3/4" / GZ BSP 1/2", AISI 316	-	200
TI-A102-12-10-SS	Adaptor GZ BSPT 3/4" / GZ BSP 5/8", AISI 316	-	200
TI-A102-12-12-SS	Adaptor GZ BSPT 3/4" / GZ BSP 3/4", AISI 316	-	200
TI-A102-12-12-SS304	Adaptor GZ BSPT 3/4" / GZ BSP 3/4", AISI 304	-	200
TI-A102-12-16-SS	Adaptor GZ BSPT 3/4" / GZ BSP 1", AISI 316	-	160
TI-A102-16-08-SS	Adaptor GZ BSPT 1" / GZ BSP 1/2", AISI 316	-	160
TI-A102-16-12-SS	Adaptor GZ BSPT 1" / GZ BSP 3/4", AISI 316	-	160
TI-A102-16-12-SS304	Adaptor GZ BSPT 1" / GZ BSP 3/4", AISI 304	-	160
TI-A102-16-16-SS	Adaptor GZ BSPT 1" / GZ BSP 1", AISI 316	-	160
TI-A102-16-20-SS	Adaptor GZ BSPT 1" / GZ BSP 1.1/4", AISI 316	-	160
TI-A102-20-16-SS	Adaptor GZ BSPT 1.1/4" / GZ BSP 1", AISI 316	-	160
TI-A102-20-20-SS	Adaptor GZ BSPT 1.1/4" / GZ BSP 1.1/4", AISI 316	-	160
TI-A102-20-20-SS304	Adaptor GZ BSPT 1.1/4" / GZ BSP 1.1/4", AISI 304	-	160
TI-A102-24-20-SS	Adaptor GZ BSPT 1.1/2" / GZ BSP 1.1/4", AISI 316	-	160
TI-A102-24-24-SS	Adaptor GZ BSPT 1.1/2" / GZ BSP 1.1/2", AISI 316	-	160
TI-A102-24-24-SS304	Adaptor GZ BSPT 1.1/2" / GZ BSP 1.1/2", AISI 304	-	160
TI-A102-24-32-SS304	Adaptor GZ BSPT 1.1/2" / GZ BSP 2", AISI 304	-	100
TI-A102-32-20-SS	Adaptor GZ BSPT 2" / GZ BSP 1.1/4", AISI 316	-	100
TI-A102-32-24-SS	Adaptor GZ BSPT 2" / GZ BSP 1.1/2", AISI 316	-	100
TI-A102-32-32-SS	Adaptor GZ BSPT 2" / GZ BSP 2", AISI 316	-	100
TI-A102-40-40-SS	Adaptor GZ BSPT 2.1/2" / GZ BSP 2.1/2", AISI 316	-

High-pressure adaptor type A102 with external BSPT thread (seal on the thread) and external BSP thread (seal cone 60°). Material: AISI 316L and AISI 304 steel.