Is the JIC 90Â° adjustable angle fitting with carbon steel BSP socket, type WE-BG, compatible with standard BSP threaded ports using its O-ring and retaining ring seal?

Yes. The JIC 90Â° adjustable angle fitting with carbon steel BSP socket, type WE-BG is compatible with standard BSP threaded ports when it uses an O-ring and retaining ring seal. The description specifies a BSP socket with sealing by O-ring and retaining ring, and the carbon steel, galvanized construction does not alter sealing compatibility. For correct installation and leak-free operation ensure: the mating BSP port is the matching size and thread form (BSPP/BSPT as specified), the O-ring material is suitable for the fluid and temperature, the retention groove and retaining ring are undamaged, and proper assembly torque is applied. If any of these conditions arenât met, sealing may fail.

Can the JIC 90Â° adjustable angle fitting with carbon steel BSP socket, type WE-BG, be used with existing BSP ports without additional sealing components?

No. The JIC 90Â° adjustable angle fitting with carbon steel BSP socket, type WE-BG Format requires its own sealing arrangement and is not guaranteed to seal with existing BSP ports without additional sealing components. The referenced adjustable 90Â° angle fitting (JIC 37Â° with external BSP thread) seals using an O-ring and retaining ring; by analogy, WE-BG units expect a compatible O-ring/retaining-ring style sealing interface or an appropriate mating port designed for that seal. Therefore, you must ensure the mating BSP port accepts the WE-BG sealing method or add the proper O-ring/retaining ring to achieve a reliable leak-free connection.

Does the JIC 90Â° adjustable angle fitting with carbon steel BSP socket, type WE-BG, require torque specifications for BSP installation?

No. The JIC 90Â° adjustable angle fitting with carbon steel BSP socket, type WE-BG Format does not require specific torque specifications for BSP installation beyond standard good-practice tightening. The described product (Adjustable 90Â° angle fitting JIC 37Â° with external BSP thread, seal with O-ring and retaining ring, material: carbon steel, galvanized) uses an O-ring face seal and retaining ring to achieve sealing; this design relies on proper indentation and seating rather than a precise torque value. Tighten handâtight and then apply moderate additional turns with a wrench to seat the O-ring and secure the retaining ring, avoiding overâtorque that could damage threads, deform the Oâring, or distort the fitting. Follow general guidelines: - Clean threads and sealing faces; inspect Oâring for damage. - Assemble by hand until seated, then tighten with a wrench until firm engagement and proper alignment. - Avoid excessive force; if available, follow the hose/fitting manufacturer's recommended torque ranges for similar BSP fittings or use calibrated tools to achieve consistent clamping. - After initial assembly, check for leaks at pressure and retorque only if leakage is detected, using minimal increments. If application demands critical sealing (high pressure, safety-critical system) or specific coupling hardware, consult the manufacturer or technical datasheet for any recommended torque ranges or installation procedures.

Fitting angled 90° adjustable JIC with BSP male of carbon steel, type WE-BG

Additional information

Material	CS – steel (cast iron)

Fitting angled 90° adjustable JIC 37° with BSP male thread (sealing an O-ring with a retaining ring). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HJ-WE-07-BG-02	Fitting 90° adjustable male JIC 7/16"-20 / 1/8" BSP male	-	350	In stock	Enquiry
HJ-WE-07-BG-04	Fitting 90° adjustable male JIC 7/16"-20 / 1/4" BSP male	-	315	In stock	Enquiry
HJ-WE-07-BG-06	Fitting 90° adjustable male JIC 7/16"-20 / 3/8" BSP male	-	250	In stock	Enquiry
HJ-WE-07-BG-08	Fitting 90° adjustable male JIC 7/16"-20 / 1/2" BSP male	-	250	In stock	Enquiry
HJ-WE-08-BG-02	Fitting 90° adjustable male JIC 1/2"-20 / 1/8" BSP male	-	350	In stock	Enquiry
HJ-WE-08-BG-04	Fitting 90° adjustable male JIC 1/2"-20 / 1/4" BSP male	-	315	In stock	Enquiry
HJ-WE-08-BG-06	Fitting 90° adjustable male JIC 1/2"-20 / 3/8" BSP male	-	250	In stock	Enquiry
HJ-WE-09-BG-04	Fitting 90° adjustable male JIC 9/16"-18 / 1/4" BSP male	-	315	In stock	Enquiry
HJ-WE-09-BG-06	Fitting 90° adjustable male JIC 9/16"-18 / 3/8" BSP male	-	250	In stock	Enquiry
HJ-WE-09-BG-08	Fitting 90° adjustable male JIC 9/16"-18 / 1/2" BSP male	-	250	In stock	Enquiry
HJ-WE-12-BG-04	Fitting 90° adjustable male JIC 3/4"-16 / 1/4" BSP male	-	315	In stock	Enquiry
HJ-WE-12-BG-06	Fitting 90° adjustable male JIC 3/4"-16 / 3/8" BSP male	-	250	In stock	Enquiry
HJ-WE-12-BG-08	Fitting 90° adjustable male JIC 3/4"-16 / 1/2" BSP male	-	250	In stock	Enquiry
HJ-WE-12-BG-12	Fitting 90° adjustable male JIC 3/4"-16 / 3/4" BSP male	-	250	In stock	Enquiry
HJ-WE-14-BG-06	Fitting 90° adjustable male JIC 7/8"-14 / 3/8" BSP male	-	250	In stock	Enquiry
HJ-WE-14-BG-08	Fitting 90° adjustable male JIC 7/8"-14 / 1/2" BSP male	-	250	In stock	Enquiry
HJ-WE-14-BG-12	Fitting 90° adjustable male JIC 7/8"-14 / 3/4" BSP male	-	250	In stock	Enquiry
HJ-WE-17-BG-08	Fitting 90° adjustable male JIC 1.1/16"-12 / 1/2" BSP male	-	250	In stock	Enquiry
HJ-WE-17-BG-12	Fitting 90° adjustable male JIC 1.1/16"-12 / 3/4" BSP male	-	250	In stock	Enquiry
HJ-WE-17-BG-16	Fitting 90° adjustable male JIC 1.1/16"-12 / 1" BSP male	-	200	In stock	Enquiry
HJ-WE-21-BG-12	Fitting 90° adjustable male JIC 1.5/16"-12 / 3/4" BSP male	-	250	In stock	Enquiry
HJ-WE-21-BG-16	Fitting 90° adjustable male JIC 1.5/16"-12 / 1" BSP male	-	200	In stock	Enquiry
HJ-WE-21-BG-20	Fitting 90° adjustable male JIC 1.5/16"-12 / 1.1/4" BSP male	-	200	In stock	Enquiry
HJ-WE-26-BG-16	Fitting 90° adjustable male JIC 1.5/8"-12 / 1" BSP male	-	200	In stock	Enquiry
HJ-WE-26-BG-20	Fitting 90° adjustable male JIC 1.5/8"-12 / 1.1/4" BSP male	-	200	In stock	Enquiry
HJ-WE-30-BG-20	Fitting 90° adjustable male JIC 1.7/8"-12 / 1.1/4" BSP male	-	200	In stock	Enquiry
HJ-WE-30-BG-24	Fitting 90° adjustable male JIC 1.7/8"-12 / 1.1/2" BSP male	-	160	In stock	Enquiry