Pressure gauge connection 90° adjustable, with female thread and test connection, with male thread M16x2

Q: Is the Pressure gauge connection 90Â° adjustable, with female thread and test connection, with male thread M16x2 compatible with standard ISO 15171-2 pressure gauges?

Yes. The Pressure gauge connection 90Â° adjustable, with female thread and test connection, with male thread M16x2 Format is compatible with standard ISO 15171-2 pressure gauges. The product description explicitly states it is "standard for ISO 15171-2," features an adjustable 90Â° connection with internal BSP (inch) female thread and an external M16x2 male test connection on the measuring tip side. Materials, sealing, and pressure/temperature ratings do not affect the thread compatibility.

Q: Does the Pressure gauge connection 90Â° adjustable, with female thread and test connection, with male thread M16x2 include a pressure surge damper option?

Yes. The Pressure gauge connection 90Â° adjustable, with female thread and test connection, with male thread M16x2 Format is offered in two coupling variants: free flow and with a pressure surge damper. The product description confirms the damper option is available.

Q: Can the Pressure gauge connection 90Â° adjustable, with female thread and test connection, with male thread M16x2 be used with fluids other than hydraulic oil?

Yes. the Pressure gauge connection 90Â° adjustable, with female thread and test connection, with male thread M16x2 Format can be used with fluids other than hydraulic oil, but with important limitations. Key compatibility factors from the product description: - Material: steel with zinc-nickel coating. mechanically robust and corrosion-resistant, suitable for many oils, hydraulic fluids, and some water-glycol mixtures; not ideal for strong acids, alkalis, or highly corrosive media. - Sealing: NBR (nitrile). compatible with mineral oils, many hydraulic fluids, petroleum-based oils, and some synthetic oils. NBR is not suitable for extended contact with ketones, strong polar solvents, some phosphate esters at high temperatures, or certain synthetic fluids (check specific fluid compatibility). - Temperature range: -30Â°C to +120Â°C. fluids must operate within this range for seal and material integrity. - Working pressure: 630 bar. fine for high-pressure fluids provided chemical compatibility is met. - Variants: free flow or pressure surge damper do not change chemical compatibility but may affect suitability for viscous or particulate-laden media. Recommendation: 1. Verify chemical compatibility of the intended fluid with NBR seals and zinc-nickel plated steel (consult supplier compatibility charts or material datasheets). 2. Ensure operating temperature and pressure of your system stay within the stated limits. 3. For aggressive, highly polar, or high-temperature fluids, consider alternative seal materials (e.g., FKM/Viton, EPDM, PTFE) or different coatings/materials. If you specify the exact fluid (e.g., water-glycol, phosphate ester, synthetic ester, petroleum oil, solvent), I can advise more precisely.

All products, Measurement couplings/

Pressure gauge connection 90° adjustable, with female thread and test connection, with male thread M16x2

Additional information

Material	CS – steel (cast iron)

Connection to the pressure gauge 90° with internal BSP inch thread, adjustable and standard for ISO 15171-2, external thread M16x2, on the measuring tip side. The coupling is available in two variants: with free flow and with pressure surge damper. Material: steel with zinc-nickel coating. Working pressure: 630 bar. Sealing: NBR. Operating temperature: from -30°C to +120°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
PS-620-10-204-00	Connection to manometer, angled 90° GZ M16x2, connection GW 1/4" BSP	-	630	In stock	Enquiry
PS-620-10-204-00-1	Connection to manometer, angled 90° GZ M16x2, connection GW 1/4" BSP, with damper.	-	630	In stock	Enquiry
PS-620-10-208-00	Connection to angular manometer 90° GZ M16x2, connection GW 1/2" BSP	-	630	In stock	Enquiry
PS-620-10-208-00-1	Connection to manometer, angled 90° GZ M16x2, connection GW 1/2" BSP, with silencer	-	630	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Connection to the pressure gauge 90° with internal BSP inch thread, adjustable and standard for ISO 15171-2, external thread M16x2, on the measuring tip side. The coupling is available in two variants: with free flow and with pressure surge damper. Material: steel with zinc-nickel coating. Working pressure: 630 bar. Sealing: NBR. Operating temperature: from -30°C to +120°C.