Is the Adjustable plug manifold, type R43 suitable for use with both vacuum and compressed air at pressures up to 12 bar and temperatures from -20Â°C to +60Â°C?

Yes. The Adjustable plug manifold, type R43 is suitable for both vacuum and compressed air applications within the specified limits: working medium includes vacuum and air, working pressure up to 12 bar, and operating temperature range from â20Â°C to +60Â°C. The plastic construction with NBR sealing provides mechanical and pneumatic tightness for multiple assemblies, so it meets the stated conditions.

Can the Adjustable plug manifold, type R43 maintain airtight and mechanical seals after repeated assembly and disassembly?

Yes. The Adjustable plug manifold, type R43 is designed for repeated assembly and disassembly without loss of sealing on both mechanical and pneumatic sides. Made of durable plastic with NBR seals, it maintains airtight and mechanical seals across its working range (vacuum to air, up to 12 bar) and operating temperatures from -20Â°C to +60Â°C, ensuring reliable performance through multiple uses.

Does the Adjustable plug manifold, type R43 use NBR seals compatible with oils or other common pneumatic media?

Yes. The Adjustable plug manifold, type R43 uses NBR (nitrile rubber) seals. NBR is commonly compatible with compressed air and many pneumatic media; it also has good resistance to mineral oils and lubricants typically used in pneumatic systems. However, NBRâs resistance is limited for some media. it performs poorly with ketones, esters, strong acids/bases, and certain synthetic oils or aggressive chemicals. Operating range is -20Â°C to +60Â°C, so seal performance outside this temperature band may degrade. For specific oil types or aggressive fluids, verify compatibility with the fluid manufacturer or consider alternative elastomers (e.g., FKM/EPDM) if needed.

Adjustable plug manifold, type R43

All products, Push-in fittings/

Additional information

Material	P – material (plastic)

Adjustable plug distributor, type R43, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2L43001	Adjustable distributor connector RL43, 4 x hose 4 mm / GZ M5, plastic	-	12	In stock	Enquiry
MW-2L43002	Adjustable distributor connector RL43, 4 x hose 4 mm / GZ BSP 1/8", plastic	-	12	In stock	Enquiry
MW-2L43003	Adjustable distributor connector RL43, 4 x hose 4 mm / GZ BSP 1/4", plastic	-	12	In stock	Enquiry
MW-2L43008	Adjustable distributor connector RL43, 4 x hose 6 mm / GZ BSP 1/8", plastic	-	12	In stock	Enquiry
MW-2L43009	Adjustable distributor connector RL43, 4 x hose 6 mm / GZ BSP 1/4", plastic	-	12	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Adjustable plug distributor, type R43, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.