Is the ANFOR lever connector socket with hose end, galvanized steel, type A.7 suitable for use in groundwater drainage and wastewater treatment plants?

Yes. The ANFOR lever connector socket with hose end, galvanized steel, type A.7 is suitable for use in groundwater drainage and wastewater treatment plants. The product description explicitly lists groundwater drainage and wastewater treatment plants among its intended applications. Its galvanized steel construction and NR/SBR rubber sealing provide corrosion resistance and reliable sealing for water and wastewater environments. The working pressure range (5â19 bar depending on size) and operating temperature range (â20Â°C to +50Â°C) cover typical conditions encountered in drainage and wastewater systems. Ensure you select the correct connector size for the required pressure and flow, and verify compatibility with the specific media and any regulatory or project-specific materials/chemical resistance requirements before installation.

Can the ANFOR lever connector socket with hose end, galvanized steel, type A.7 withstand temperatures from -20Â°C to +50Â°C in outdoor agricultural use?

Yes. The ANFOR lever connector socket with hose end, galvanized steel, type A.7 is specified with an operating temperature range from -20Â°C to +50Â°C, so it is suitable for outdoor agricultural use within that temperature span. Its galvanized steel construction and NR/SBR rubber sealing are appropriate for typical agricultural environments; ensure working pressures (5â19 bar depending on size) and specific site conditions (UV exposure, chemicals, prolonged submersion) are compatible with NR/SBR and galvanization for long-term performance.

Does the ANFOR lever connector socket with hose end, galvanized steel, type A.7 resist chemical exposure in industrial and environmental settings?

The ANFOR lever connector socket with hose end, galvanized steel, type A.7 offers limited resistance to chemical exposure but is not specifically designed as a chemical-resistant coupling. Key points from the product description relevant to chemical exposure: - Construction: galvanized steel body provides basic corrosion resistance to common environmental and industrial conditions, improving durability versus plain steel. However, galvanization can be attacked by strong acids, alkalis, chlorides, and some solvents over time. - Sealing: NR/SBR (natural rubber/styrene-butadiene) seals provide good general-purpose sealing for water, wastewater, and many non-aggressive fluids. NR/SBR is vulnerable to swelling, hardening or degradation when exposed to oils, fuels, ketones, strong acids, bases, chlorinated hydrocarbons, and many organic solvents. - Application context: the connector is specified for agricultural, horticultural, industrial, construction, drainage, wastewater treatment and environmental protection uses. environments typically involving water, sewage and moderate contaminants rather than concentrated aggressive chemicals. - Operating conditions: working pressure (5â19 bar) and temperature range (â20Â°C to +50Â°C) indicate mechanical suitability but do not imply chemical compatibility. Conclusion: For typical water, sewage, groundwater, and general industrial environmental exposures the ANFOR lever connector socket with hose end, galvanized steel, type A.7 will perform acceptably. For exposure to aggressive chemicals, solvents, fuels, strong acids or alkalis, or long-term contact with chlorides, it is not recommended without confirming chemical compatibility of both the galvanized coating and NR/SBR seals. For such cases select a connector specified for chemical service (e.g., stainless steel body and chemically resistant elastomers like EPDM, Viton/FKM, or PTFE) or consult the manufacturer with the specific chemicals, concentrations, temperatures and exposure duration.

Socket lever coupling ANFOR with fitting for hose, steel galvanized, type A.7

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

Socket lever coupling ANFOR with “tail” for hose for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel galvanized. Sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: from -20°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
OM-A7-060-060	Socket ANFOR 60 mm with Fitting for 60 mm hose, galvanized steel	60	19	In stock	Enquiry
OM-A7-080-080	Socket ANFOR 80 mm with Fitting for 80 mm hose, galvanized steel	80	16	In stock	Enquiry
OM-A7-100-100	Socket ANFOR 100 mm with Fitting for 100 mm hose, galvanized steel	100	14	In stock	Enquiry
OM-A7-120-120	Socket ANFOR 120 mm with Fitting for 120 mm hose, galvanized steel	120	13	In stock	Enquiry
OM-A7-150-150	Socket ANFOR 150 mm with Fitting for 150 mm hose, galvanized steel	150	12	In stock	Enquiry
OM-A7-200-200	Socket ANFOR 200 mm with Fitting for 200 mm hose, galvanized steel	200	6	In stock	Enquiry
OM-A7-250-250	Socket ANFOR 250 mm with Fitting for 250 mm hose, galvanized steel	250	5	In stock	Enquiry
OM-A7-300-300	Socket ANFOR 300 mm with Fitting for 300 mm hose, galvanized steel	300	5	In stock	Enquiry
OM-A7-400-400	Socket ANFOR 400 mm with Fitting for 400 mm hose, galvanized steel	400	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Socket lever coupling ANFOR with “tail” for hose for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel galvanized. Sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: from -20°C to +50°C.