Is the Band-ItÂ® Ultra-LokÂ® tape with built-in buckle, AISI 201 steel, compatible with electric tools BD-UL9010 and BD-UL4000B for installation?

Yes. Band-ItÂ® Ultra-LokÂ® tape with built-in buckle, AISI 201 steel is compatible with electric tools BD-UL9010 and BD-UL4000B for installation, as the product description explicitly states installation using those electric tools. For mounting 1/2" clamps to the mounting device, use the BD-M09387 adjustment washer.

Can the Band-ItÂ® Ultra-LokÂ® tape with built-in buckle, AISI 201 steel, be used on corrugated hoses without causing leaks?

Band-ItÂ® Ultra-LokÂ® tape with built-in buckle, AISI 201 steel is designed for tight fittings on non-corrugated hoses; its smooth band surface and correct installation prevent leaks into the clamp. On corrugated hoses, however, the uneven profile prevents a continuous seal, so using this tape on corrugated hoses can lead to leaks. For reliable sealing use on smooth (non-corrugated) hose ends and install with the recommended electric tools (BD-UL9010 or BD-UL4000B) and BD-M09387 washer for 1/2" clamps.

Can the Band-ItÂ® Ultra-LokÂ® tape with built-in buckle, AISI 201 steel, be tightened using manual tools for small installations?

Yes. but with limitations. The Band-ItÂ® Ultra-LokÂ® tape with built-in buckle, AISI 201 steel, is designed primarily for installation with electric tools BD-UL9010 or BD-UL4000B to achieve the required tension and consistent crimp. For small, non-critical installations you can tighten it manually using appropriate hand tools (e.g., a sturdy screwdriver or pliers and a dedicated tensioning/crimping hand tool), taking care to replicate the proper tension and secure crimp. However, manual tightening may not provide the same repeatable clamping force or crimp integrity as the specified electric tools, so itâs not recommended for demanding, high-pressure, or safety-critical applications. Use a BD-M09387 adjustment washer when mounting 1/2" clamps to the mounting device as specified.

Tape Band-It® Ultra-Lok® with built-in a buckle, steel AISI 201

All products, Band clamping system/

Additional information

Material	SS – stainless steel

Tape o double loop with built-in a buckle system Band-It® Ultra-Lok® made of steel AISI 201 intended for most demanding applications. double loop increases strength clamps. A band with a smooth surface and its correct installation on a non-serrated hose creates a tight fixing of the fitting, preventing leaks into the inside of the clamp. installing using tools electrical BD-UL9010 or BD-UL4000B. Do mounting straps 1/2″ for devices mounting should use washer adjustment BD-M09387. Material: steel AISI 201.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BD-UL2109	Band ULTRA-LOK, width 3/4", inner loop diameter 69 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2119	Band ULTRA-LOK, width 3/4", inner loop diameter 76 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2129	Band ULTRA-LOK, width 3/4", inner loop diameter 88 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2139	Band ULTRA-LOK, width 3/4", inner loop diameter 101 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2149	Band ULTRA-LOK, width 3/4", inner loop diameter 114 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2159	Band ULTRA-LOK, width 3/4", inner loop diameter 127 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2169	Band ULTRA-LOK, width 3/4", inner loop diameter 152 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2179	Band ULTRA-LOK, width 3/4", inner loop diameter 165 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2189	Band ULTRA-LOK, width 3/4", inner loop diameter 177 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2199	Band ULTRA-LOK, width 3/4", inner loop diameter 203 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2279	Band ULTRA-LOK, width 3/4", inner loop diameter 50 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2289	Band ULTRA-LOK, width 3/4", inner loop diameter 228 mm, AISI 201	-	-	In stock	Enquiry
BD-UL2709	Band ULTRA-LOK, width 3/4", inner loop diameter 139 mm, AISI 201	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Tape o double loop with built-in a buckle system Band-It® Ultra-Lok® made of steel AISI 201 intended for most demanding applications. double loop increases strength clamps. A band with a smooth surface and its correct installation on a non-serrated hose creates a tight fixing of the fitting, preventing leaks into the inside of the clamp. installing using tools electrical BD-UL9010 or BD-UL4000B. Do mounting straps 1/2″ for devices mounting should use washer adjustment BD-M09387. Material: steel AISI 201.