Is Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel suitable for marine environments exposed to salt spray and UV?

Yes. Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel is suitable for marine environments exposed to salt spray and UV. The tapeâs base material, AISI 316 stainless steel, offers excellent resistance to pitting and crevice corrosion in chloride-rich (salt) conditions. The partial epoxy coating increases corrosion protection further, is halogen-free and non-toxic, and helps shield the metal where applied. The product description also states high resistance to corrosion and UV radiation, and it tolerates wide temperature ranges, making it appropriate for outdoor marine use. For best long-term performance in continuous immersion or extremely aggressive environments, consider full-coating or additional protective measures and verify compatibility with your specific exposure conditions and installation method.

Can Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel withstand prolonged exposure to high temperatures and flames?

Yes. Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel is designed for prolonged exposure to high temperatures and flames. The partially epoxy-coated AISI 316 construction provides excellent corrosion resistance and the product description specifies high resistance to fire, UV, and both high and low temperatures. The epoxy coating is non-toxic and halogen-free, and the stainless AISI 316 base metal maintains mechanical integrity at elevated temperatures better than lower-grade steels. For precise maximum service temperatures, duration of flame exposure, or application-specific limits, consult the manufacturerâs technical sheet or test data.

Does Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel resist chemical exposure (acids, solvents)?

Yes. Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel offers good resistance to many chemicals. AISI 316 stainless steel itself is highly resistant to corrosion from a wide range of acids, alkalis and solvents due to its molybdenum content, making it suitable for marine and chemical environments. The partial epoxy coating further increases corrosion protection, provides a non-toxic, halogen-free barrier, and helps protect the underlying metal from aggressive agents and UV exposure. The product description also notes high resistance to fire, corrosion, UV radiation, and extreme temperatures, which supports durability in chemically challenging conditions. Limitations: No coating is universally impervious. Strong oxidizing acids (e.g., concentrated nitric acid), some halogenated solvents, and highly chlorinated or strongly reducing environments can still attack stainless steels or degrade coatings over time. The coating is partial, so exposed steel edges, cut areas or mechanically stressed zones may be more vulnerable. For continuous immersion, high concentrations, elevated temperatures, or critical applications, verify compatibility with the specific chemical, concentration and temperature, and consider full-coating or alternative materials if needed. Conclusion: For general exposure to common acids and solvents, Band-ItÂ® Ball-LokÂ® tape, partially coated, AISI 316 steel performs well; for aggressive or continuous chemical exposure, confirm compatibility with specific chemicals and service conditions before use.

Band-It® Ball-Lok® tape, partially coated, AISI 316 steel

All products, Band clamping system/

Additional information

Material	SS – stainless steel

Self-locking band partially coated with epoxy (increases corrosion protection, non-toxic material, halogen-free) designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BD-KE0618	Ball-Lok self-closing band, width 4.6 mm, L=150 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0628	Ball-Lok self-closing band, width 4.6 mm, L=201 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0638	Ball-Lok self-closing band, width 4.6 mm, L=259 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0648	Ball-Lok self-closing band, width 4.6 mm, L=360 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0658	Ball-Lok self-closing band, width 4.6 mm, L=520 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0668	Ball-Lok self-closing band, width 4.6 mm, L=679 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0678	Ball-Lok self-closing band, width 4.6 mm, L=838 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0828	Ball-Lok self-closing band, width 7.9 mm, L=201 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0838	Ball-Lok self-closing band, width 7.9 mm, L=259 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0848	Ball-Lok self-closing band, width 7.9 mm, L=360 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0858	Ball-Lok self-closing band, width 7.9 mm, L=520 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0868	Ball-Lok self-closing band, width 7.9 mm, L=679 mm partially coated, AISI 316	-	-	In stock	Enquiry
BD-KE0878	Ball-Lok self-closing band, width 7.9 mm, L=838 mm partially coated, AISI 316	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Self-locking band partially coated with epoxy (increases corrosion protection, non-toxic material, halogen-free) designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.