Is the CAMLOCK C connector socket with corrugated hose end, brass suitable for petroleum transfer at up to 10 bar and which sizes support this pressure?

Yes. The CAMLOCK C connector socket with corrugated hose end, brass is suitable for petroleum transfer at pressures up to 10 bar, provided it is used within the size range rated for that pressure. The product specification states a working pressure: up to 10 bar, depending on connector size. Materials (brass body, AISI 304 levers, NBR sealing) are appropriate for typical petroleum applications, but allowable pressure depends on the specific size . smaller diameters usually support higher working pressures than larger diameters. Before use, confirm the exact connector sizeâs rated working pressure from the manufacturerâs size-pressure chart and ensure compatibility with the fluid, temperature, hose type, and applicable safety standards.

Can CAMLOCK C connector socket with corrugated hose end, brass be used with NBR seals in aggressive petrochemical fluids and what are compatibility limits?

CAMLOCK C connector socket with corrugated hose end, brass with NBR seals can be used with some petrochemical fluids but has important compatibility limits. NBR (nitrile) resists hydrocarbons, mineral oils and fuels well up to about 70â100Â°C and is suitable for many aliphatic hydrocarbons and petroleum-based products. It shows poor resistance to aromatic hydrocarbons (e.g., benzene, toluene, xylene), chlorinated solvents, ketones, certain esters and strong oxidizers - these can cause swelling, hardening or rapid degradation. Brass body and AISI 304 levers are generally acceptable for many fuels but can suffer dezincification in aggressive chloride- or ammonia-containing environments. Working pressure up to 10 bar depends on size; chemical compatibility and temperature reduce safe use. Recommendation: verify fluid-specific compatibility (chemical family, concentration, and operating temperature/pressure). For aggressive petrochemicals or temperatures above ~100Â°C, choose FKM/Viton or PTFE seals and confirm metallurgy.

Can CAMLOCK C connector socket with corrugated hose end, brass be used in food-grade applications with NBR seals?

Generally no. CAMLOCK C connector socket with corrugated hose end, brass with NBR seals is not recommended for broad foodâgrade applications. Why: - NBR (nitrile rubber) is not inherently foodâgrade. While some NBR compounds can meet food contact standards (e.g., FDA 21 CFR 177.2600 or EU foodâcontact regulations), standard industrial NBR typically does not. You must verify the specific NBR formulation and manufacturer certification for food contact. - Brass may contain lead or other alloying elements that can leach into food or beverages unless the brass is a certified leadâfree alloy (e.g., UNS C69300 / âfreeâcuttingâ or other plumbing leadâfree grades). For potable or food applications, a documented leadâfree brass is required by many regulations. - Construction and finish matter: corrugated/ribbed hose ends and Camlock fittings used in petrochemical transfer may have surface roughness, residues, or contaminants from manufacturing that are unacceptable for food use unless cleaned and certified. - Standards and approvals: Food applications typically require components certified to relevant standards (FDA, EC 1935/2004, NSF, 3-A, etc.). The listed description (MIL-C-27487, brass, AISI 304 levers, NBR seals) indicates an industrial petrochemical design, not automatic compliance with foodâgrade standards. When it might be acceptable: - If the specific CAMLOCK C connector socket with corrugated hose end, brass is supplied with documented foodâgrade NBR (FDA/EU certified) and the brass is certified leadâfree for food contact, and the part is cleaned and certified to applicable food standards, then it can be used for certain food applications within manufacturerâs stated temperature and pressure limits. - Also confirm compatibility of NBR with the specific food product (fats, oils, acidic products can attack NBR; for fatty foods EPDM or FKM may be preferable). Recommendation: - Request written certifications from the supplier for the exact part: NBR foodâcontact certification, brass composition/leadâfree declaration, and any applicable food safety/cleaning/sanitation approvals. If unavailable, choose a connector explicitly specified and certified for food use.

CAMLOCK C connector socket with corrugated hose end, brass

Additional information

Material	B – brass (bronze)

CAMLOCK C connector socket with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-C-050-B	CAMLOCK C 1/2" brass connector	12	9	In stock	Enquiry
AC-C-050-BX	CAMLOCK C 1/2" connector, brass	12	16	In stock	Enquiry
AC-C-075-B	CAMLOCK C 3/4" brass connector	20	10	In stock	Enquiry
AC-C-075-BX	CAMLOCK connector C 3/4", brass	20	16	In stock	Enquiry
AC-C-100-B	CAMLOCK C 1" brass connector	25	10	In stock	Enquiry
AC-C-100-BX	CAMLOCK C 1" brass connector	25	10	In stock	Enquiry
AC-C-125-B	CAMLOCK C 1.1/4" brass connector	32	10	In stock	Enquiry
AC-C-125-BX	CAMLOCK C 1.1/4" connector, brass	32	16	In stock	Enquiry
AC-C-150-B	CAMLOCK C 1.1/2" brass connector	40	10	In stock	Enquiry
AC-C-150-BX	CAMLOCK C 1.1/2" connector, brass	40	16	In stock	Enquiry
AC-C-200-B	CAMLOCK C 2" brass connector	50	10	In stock	Enquiry
AC-C-200-BX	CAMLOCK C 2" connector, brass	50	16	In stock	Enquiry
AC-C-250-B	CAMLOCK C 2.1/2" brass connector	65	10	In stock	Enquiry
AC-C-250-BX	CAMLOCK C 2.1/2" connector, brass	65	16	In stock	Enquiry
AC-C-300-B	CAMLOCK C 3" brass connector	75	10	In stock	Enquiry
AC-C-300-BX	CAMLOCK C 3" connector, brass	75	16	In stock	Enquiry
AC-C-400-B	CAMLOCK C 4" brass connector	100	10	In stock	Enquiry
AC-C-400-BX	CAMLOCK C 4" connector, brass	100	16	In stock	Enquiry
AC-C-500-B	CAMLOCK C 5" brass connector	125	5	In stock	Enquiry
AC-C-500-BX	CAMLOCK C 5" connector, brass	125	16	In stock	Enquiry
AC-C-600-B	CAMLOCK C 6" brass connector	150	5	In stock	Enquiry
AC-C-600-BX	CAMLOCK C 6" connector, brass	150	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

CAMLOCK C connector socket with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.