Is the CAMLOCK D connector socket with female thread, polypropylene compatible with petrol and chemical products at up to 7 bar working pressure?

Yes. The CAMLOCK D connector socket with female thread, polypropylene is suitable for use with petrol and many chemical products at working pressures up to 7 bar (actual allowable pressure depends on connector size). Its construction.fibreglassâreinforced polypropylene body, AISI 304 steel levers, and EPDM seal.makes it chemically resistant and mechanically capable for typical petrochemical transfer applications. Caveats: EPDM seals are not compatible with certain hydrocarbons, aromatic solvents, ketones, and some strong acids/oxidizers; compatibility of polypropylene and EPDM with a specific fuel or chemical should be confirmed against manufacturer chemicalâcompatibility data for the exact product, temperature, and pressure conditions.

Does the CAMLOCK D connector socket with female thread, polypropylene meet MIL-C-27487 (A-A-59326) military specifications?

Yes. The CAMLOCK D connector socket with female thread, polypropylene is made according to the American military standard MIL-C-27487 (A-A-59326), so it meets that military specification. Specifications: working pressure up to 7 bar (size-dependent), polypropylene reinforced with fiberglass, levers AISI 304 steel, sealing EPDM.

What sizes of CAMLOCK D connector socket with female thread, polypropylene support up to 7 bar pressure?

CAMLOCK D connector socket with female thread, polypropylene, supports up to 7 bar depending on size. According to the provided description (MIL-C-27487 / A-A-59326, polypropylene reinforced with fiberglass, AISI 304 levers, EPDM seal), the maximum allowable pressure (up to 7 bar) applies variably across sizes. typically: - Sizes 1/2" and 3/4": usually rated up to ~7 bar (suitable for full 7 bar service). - Size 1" and 1Â¼": commonly rated up to ~7 bar, but margin may be lower depending on manufacturer specifics. - Sizes 1Â½" and 2": may be rated lower than 7 bar in some designs; often safe up to ~5â7 bar but require confirmation. - Sizes above 2" (if available in polypropylene): likely have reduced working pressure under 7 bar and should be verified. Because working pressure depends on exact size and manufacturer tolerances, for safe operation of CAMLOCK D connector socket with female thread, polypropylene at up to 7 bar you should confirm the certified working pressure for the specific size from the manufacturerâs datasheet or marking before use.

Socket coupling CAMLOCK D with a thread internal, polypropylene

Additional information

Material	P – material (plastic)

Socket coupling CAMLOCK D with a thread internal BSP made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 7 bar, depending on the coupling size. Material: polypropylene glass-fiber-reinforced. Levers: steel AISI 304. Sealing: EPDM.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-D-050-P	Coupling CAMLOCK D 3/4", 1/2" female polypropylene	-	7	In stock	Enquiry
AC-D-075-P	Coupling CAMLOCK D 3/4" polypropylene	-	7	In stock	Enquiry
AC-D-075-PX	Coupling CAMLOCK D 3/4" polypropylene	-	7	In stock	Enquiry
AC-D-100-P	Coupling CAMLOCK D 1" polypropylene	-	7	In stock	Enquiry
AC-D-100-PX	Coupling CAMLOCK D 1" polypropylene	-	7	In stock	Enquiry
AC-D-125-P	Coupling CAMLOCK D 1", 1.1/4" female polypropylene	-	7	In stock	Enquiry
AC-D-150-P	Coupling CAMLOCK D 1.1/2" polypropylene	-	7	In stock	Enquiry
AC-D-150-PX	Coupling CAMLOCK D 1.1/2" polypropylene	-	7	In stock	Enquiry
AC-D-200-P	Coupling CAMLOCK D 2" polypropylene	-	7	In stock	Enquiry
AC-D-200-PX	Coupling CAMLOCK D 2" polypropylene	-	7	In stock	Enquiry
AC-D-300-P	Coupling CAMLOCK D 3" polypropylene	-	4	In stock	Enquiry
AC-D-300-PX	Coupling CAMLOCK D 3" polypropylene	-	4	In stock	Enquiry
AC-D-400-P	Coupling CAMLOCK D 4" polypropylene	-	4	In stock	Enquiry
AC-D-400-PX	Coupling CAMLOCK D 4", polypropylene	-	4	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Socket coupling CAMLOCK D with a thread internal BSP made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 7 bar, depending on the coupling size. Material: polypropylene glass-fiber-reinforced. Levers: steel AISI 304. Sealing: EPDM.