Is GRIPFLEX PE chemical fume and gas extraction hose suitable for use with highly aggressive solvent vapors and asbestos fibers?

Yes. GRIPFLEX PE chemical fume and gas extraction hose is suitable for use with highly aggressive solvent vapors and for asbestos fiber extraction. The hose is described as chemically resistant with very good resistance to solvents and aggressive vapors, specifically noted for use in the chemical industry and asbestos removal. It resists hydrolysis and biological corrosion, is free from halogens and plasticizers, and features robust construction (external spiral, option for stainless steel spiral from 80 mm) and wide operating temperature range (â40Â°C to +80Â°C). For final selection and confirmation of compatibility with specific chemicals and conditions, consult the chemical resistance table for polyethylene and obtain application-specific confirmation from Tubes International.

Can GRIPFLEX PE chemical fume and gas extraction hose be used continuously in environments with high humidity or biological contaminants?

Yes. GRIPFLEX PE chemical fume and gas extraction hose can be used continuously in environments with high humidity or where biological contaminants are present. It is specifically described as resistant to hydrolysis and biological corrosion, making it suitable for prolonged exposure to moisture and biologically active agents. Additionally, its chemically resistant polyethylene construction (free from halogen compounds and plasticizers) and robust external spiral reinforcement provide durability in aggressive vapor and gas applications. For specific chemicals, concentrations and operating conditions, confirm compatibility using the polyethylene chemical resistance table and obtain final resistance and application confirmation from Tubes International.

Does GRIPFLEX PE chemical fume and gas extraction hose require special maintenance after exposure to strong solvents?

GRIPFLEX PE chemical fume and gas extraction hose shows very good chemical resistance to solvents and aggressive vapors (polyethylene-coated fabric, resistant to hydrolysis and biological corrosion, free from halogens and plasticizers). After exposure to strong solvents, standard practice is: - Inspect visually and mechanically: check for softening, swelling, cracks, delamination of the coating, damage to the external spiral, or loss of flexibility/compressibility. - Clean the hose internally and externally with a compatible solvent or cleaning agent recommended for polyethylene-resistant materials; remove residues and allow full evaporation. - Verify couplings and bridge clamps for contamination or corrosion and re-tighten/replace if needed. - For critical or prolonged exposures, consult Tubes International for confirmation of chemical compatibility and application conditions; they can provide a definitive resistance check beyond the preliminary polyethylene table. - If any signs of degradation appear, or if the hose was exposed to unknown or highly aggressive chemicals, replace the hose rather than return to service. Routine post-exposure maintenance is primarily inspection and cleaning; specialist confirmation or replacement is required when damage or uncertain compatibility is suspected.

Hose ducting for vapours chemical and gases GRIPFLEX PE

All products, Ducting and ventilation hoses/

Additional information

Material	PE – polyethylene
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	10, 2, 60
Reinforcement	external spiral made of galvanized steel wire and sheet metal

Light, very flexible and pliable, resistant chemical hose intended for discharge aggressive chemical vapours, gases, dusts and fibres. used mainly in industry chemical and m.in. at removal asbestos. very good resistance chemical on solvents and other aggressive vapours. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. is characterized high compressibility – for 1:8, strong design, resistance on impacts thanks to outer spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance – the chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and conditions of use – by Tubes International. length standard: od 2 for 10 m. Hose material: fabric polyethylene coated polyethylene (PE). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -40°C up to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TS-PE-050	Hose GRIPFLEX PE 50 mm	50	0.9	In stock	Enquiry
TS-PE-060	Hose GRIPFLEX PE 60 mm	60	0.78	In stock	Enquiry
TS-PE-065	Hose GRIPFLEX PE 65 mm	65	0.68	In stock	Enquiry
TS-PE-070	Hose GRIPFLEX PE 70 mm	70	0.67	In stock	Enquiry
TS-PE-075	Hose GRIPFLEX PE 75 mm	75	0.62	In stock	Enquiry
TS-PE-080	Hose GRIPFLEX PE 80 mm	80	0.61	In stock	Enquiry
TS-PE-090	Hose GRIPFLEX PE 90 mm	90	0.56	In stock	Enquiry
TS-PE-100	Hose GRIPFLEX PE 100 mm	100	0.51	In stock	Enquiry
TS-PE-110	Hose GRIPFLEX PE 110 mm	110	0.48	In stock	Enquiry
TS-PE-120	Hose GRIPFLEX PE 120 mm	120	0.36	In stock	Enquiry
TS-PE-125	Hose GRIPFLEX PE 125 mm	125	0.33	In stock	Enquiry
TS-PE-130	Hose GRIPFLEX PE 130 mm	130	0.28	In stock	Enquiry
TS-PE-140	Hose GRIPFLEX PE 140 mm	140	0.25	In stock	Enquiry
TS-PE-150	Hose GRIPFLEX PE 150 mm	150	0.22	In stock	Enquiry
TS-PE-160	Hose GRIPFLEX PE 160 mm	160	0.21	In stock	Enquiry
TS-PE-170	Hose GRIPFLEX PE 170 mm	160	0.19	In stock	Enquiry
TS-PE-175	Hose GRIPFLEX PE 175 mm	180	0.185	In stock	Enquiry
TS-PE-180	Hose GRIPFLEX PE 180 mm	180	0.17	In stock	Enquiry
TS-PE-200	Hose GRIPFLEX PE 200 mm	200	0.15	In stock	Enquiry
TS-PE-215	Hose GRIPFLEX PE 215 mm	220	0.13	In stock	Enquiry
TS-PE-225	Hose GRIPFLEX PE 225 mm	225	0.12	In stock	Enquiry
TS-PE-250	Hose GRIPFLEX PE 250 mm	250	0.1	In stock	Enquiry
TS-PE-275	Hose GRIPFLEX PE 275 mm	275	0.08	In stock	Enquiry
TS-PE-300	Hose GRIPFLEX PE 300 mm	300	0.08	In stock	Enquiry
TS-PE-315	Hose GRIPFLEX PE 315 mm	325	0.06	In stock	Enquiry
TS-PE-325	Hose GRIPFLEX PE 325 mm	325	0.06	In stock	Enquiry
TS-PE-350	Hose GRIPFLEX PE 350 mm	350	0.05	In stock	Enquiry
TS-PE-375	Hose GRIPFLEX PE 375 mm	350	0.05	In stock	Enquiry
TS-PE-400	Hose GRIPFLEX PE 400 mm	400	0.05	In stock	Enquiry
TS-PE-450	Hose GRIPFLEX PE 450 mm	450	0.04	In stock	Enquiry
TS-PE-500	Hose GRIPFLEX PE 500 mm	500	0.04	In stock	Enquiry
TS-PE-600	Hose GRIPFLEX PE 600 mm	600	0.04	In stock	Enquiry
TS-PE-700	Hose GRIPFLEX PE 700 mm	700	0.03	In stock	Enquiry
TS-PE-800	Hose GRIPFLEX PE 800 mm	800	0.02	In stock	Enquiry
TS-PE-900	Hose GRIPFLEX PE 900 mm	900	0.02	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Light, very flexible and pliable, resistant chemical hose intended for discharge aggressive chemical vapours, gases, dusts and fibres. used mainly in industry chemical and m.in. at removal asbestos. very good resistance chemical on solvents and other aggressive vapours. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. is characterized high compressibility – for 1:8, strong design, resistance on impacts thanks to outer spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance – the chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and conditions of use – by Tubes International. length standard: od 2 for 10 m. Hose material: fabric polyethylene coated polyethylene (PE). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -40°C up to +80°C.

Additional information

Material	PE – polyethylene
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	10, 2, 60
Reinforcement	external spiral made of galvanized steel wire and sheet metal