Is the Fuel hose for small engines, fuel up to 10% ethanol TYGONÂ® F4040-A safe for use with gasoline containing up to 10% ethanol?

Yes. Fuel hose for small engines, fuel up to 10% ethanol TYGONÂ® F4040-A is safe for use with gasoline containing up to 10% ethanol. The hose is specifically described as resistant to most petroleum products and fuels (including those with up to 10% ethanol), designed to minimize swelling, hardening, cracking and leakage, and to maintain fuel cleanliness with low permeability to aromatics. Its temperature and mechanical properties (max operating temp +74Â°C, brittleness -37Â°C, PVC special material) and proven use in small engines, lawn mowers, recreational vehicles and similar applications confirm suitability for such gasoline.

Can Fuel hose for small engines, fuel up to 10% ethanol TYGONÂ® F4040-A be sterilized or cleaned for reuse in sensitive applications?

Fuel hose for small engines, fuel up to 10% ethanol TYGONÂ® F4040-A: Because it is made from a special PVC with minimal extractables, low permeability, and was packaged in a Clean Zone (clean room), it can be cleaned or sterilized for reuse in many sensitive applications. However, compatibility with specific sterilization methods (autoclaving, chemical disinfectants, gamma/EO sterilization) is not specified; some methods may damage PVC, affect flexibility, or compromise cleanliness. Before reuse in sensitive applications, validate the chosen cleaning/sterilization process for efficacy and material compatibility and ensure no residue or degradation occurs. If sterility assurance is critical, consult the manufacturer for validated procedures.

Can Fuel hose for small engines, fuel up to 10% ethanol TYGONÂ® F4040-A be used with diesel and kerosene?

Yes. Fuel hose for small engines, fuel up to 10% ethanol TYGONÂ® F4040-A can be used with diesel and kerosene. The product description states the hose is resistant to most petroleum products and fuels (including those with up to 10% ethanol) and explicitly lists gasoline, kerosene, diesel, heating oil, lubricants, cutting fluids, and glycol-based fluids as suitable media. Its PVC construction resists swelling, hardening, cracking and leakage from hydrocarbon exposure, and the hoseâs low permeability and minimal extractables help protect fuel cleanliness and operator safety. Ensure operating temperatures and pressures remain within the specified limits (max operating temperature +74Â°C; brittleness -37Â°C; working pressure based on burst pressure with 1:5 safety factor).

Hose fuel for small engines, fuel for 10% ethanol TYGON® F4040-A

All products, TYGON® hoses/

Additional information

Material	PVC – polyvinyl chloride
Maximum operating temperature [°C]	74
Vacuum resistance	yes
Standard length [m]	15, 57

Semi-transparent, yellow, flexible hose designed specially for fuels and oils lubricating. resistant na swelling and hardening na result operation hydrocarbons, reduces significantly risk cracking and leakage. minimum extractability secures cleanliness fuels, a low factor penetration substances aromatic secures the operator and environment. resistant na ozone and radiation UV. flexibility hose facilitates its installations even in tight places. semi-transparent wall allows na monitoring flow. hose is resistant na most products petroleum-based and fuels (also with addition ethanol for 10%) and can be used for gasoline, kerosene, oil drive and heating, agents lubricating, coolants for cutting and na base glycol. commonly used and proven in thousands applications: small engines, automotive, vehicles recreational, mowers garden, saws, installations coolant and lubrication, equipment for cutting and polishing. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum operating temperature: +74°C. temperature brittleness: -37°C. Hardness: 57° Shore (A). Density: 1.26 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
VE-T4003-C3	Hose TYGON F-4040-A 2.03x3.56 mm	2	2.76	In stock	Enquiry
VE-T4003-D3	Hose TYGON F-4040-A 2.4x4.8 mm	2	3.45	In stock	Enquiry
VE-T4004-23	Hose TYGON F-4040-A 3.2x6.4 mm	3	3.45	In stock	Enquiry
VE-T4006-23	Hose TYGON F-4040-A 4.8x8 mm	5	2.41	In stock	Enquiry
VE-T4008-23	Hose TYGON F-4040-A 6.4x9.6 mm	6	2.07	In stock	Enquiry
VE-T4010-23	Hose TYGON F-4040-A 8x11.2 mm	8	1.72	In stock	Enquiry
VE-T4012-23	Hose TYGON F-4040-A 9.5x12.7 mm	10	1.38	In stock	Enquiry
VE-T4012-43	Hose TYGON F-4040-A 9.5x15.9 mm	10	2.41	In stock	Enquiry
VE-T4014-23	Hose TYGON F-4040-A 11.1x14.3 mm	12	1.03	In stock	Enquiry
VE-T4016-23	Hose TYGON F-4040-A 12.7x15.9 mm	12	1.03	In stock	Enquiry
VE-T4016-43	Hose TYGON F-4040-A 12.7x19.1 mm	12	2.07	In stock	Enquiry
VE-T4020-43	Hose TYGON F-4040-A 15.9x22.3 mm	16	1.72	In stock	Enquiry
VE-T4024-43	Hose TYGON F-4040-A 19x25.4 mm	20	1.38	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Semi-transparent, yellow, flexible hose designed specially for fuels and oils lubricating. resistant na swelling and hardening na result operation hydrocarbons, reduces significantly risk cracking and leakage. minimum extractability secures cleanliness fuels, a low factor penetration substances aromatic secures the operator and environment. resistant na ozone and radiation UV. flexibility hose facilitates its installations even in tight places. semi-transparent wall allows na monitoring flow. hose is resistant na most products petroleum-based and fuels (also with addition ethanol for 10%) and can be used for gasoline, kerosene, oil drive and heating, agents lubricating, coolants for cutting and na base glycol. commonly used and proven in thousands applications: small engines, automotive, vehicles recreational, mowers garden, saws, installations coolant and lubrication, equipment for cutting and polishing. Length of a full hose roll 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum operating temperature: +74°C. temperature brittleness: -37°C. Hardness: 57° Shore (A). Density: 1.26 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.