Can Hand crimper TNT250/B pass its crimping head through angled hoses to reach and properly crimp fittings?

Yes. The Hand crimper TNT250/B Format is designed so its crimping head can be passed through the hose, which makes it suitable for reaching and properly crimping fittings on angled hose ends. The toolâs six-jaw crimping head and included sets of jaws (for standard hoses and for hoses with reduced outer diameter) let you position the head inside or through the hose to accommodate awkward angles and ensure a reliable, even crimp. Included accessories (grease, plastic caliper, case) support correct setup and maintenance for consistent results.

Does the Hand crimper TNT250/B accommodate hoses with reduced outer diameter and standard ones using its pass-through crimping head?

Yes. The Hand crimper TNT250/B accommodates both reduced outer-diameter hoses and standard hoses using its pass-through six-jaw crimping head. The head design lets the tool be passed through the hose-useful for crimping angled ends-and the set includes six sets of jaws for standard and reduced-diameter hoses, plus grease, a plastic caliper, and a case.

Is Hand crimper TNT250/B suitable for crimping fittings on hoses with tight bends or restricted access?

Yes. The Hand crimper TNT250/B is suitable for crimping fittings on hoses with tight bends or restricted access. Its crimping head is designed to pass through the hose, which is specifically important when working with angled ends or confined spaces. The included six-jaw system and the six sets of jaws (covering standard hoses and those with reduced outer diameter) provide the adaptability needed for different hose profiles and smaller clearances. The kitâs ancillary tools. grease, a plastic caliper for measuring, and a case for organized transport. further support reliable use in the field where access is limited.

Hand crimper TNT250/B

Additional information

Hand crimping tool TNT250/B (six-jaw crimp) for air conditioning. The crimping head allows it to be passed through the hose, which is important when crimping angled ends. The set includes: 6 sets of jaws for standard hoses and those with reduced outer diameter, grease, plastic caliper, case.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
PF-TNT250-B	Air conditioning crimping tool (6 sets of jaws)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hand crimping tool TNT250/B (six-jaw crimp) for air conditioning. The crimping head allows it to be passed through the hose, which is important when crimping angled ends. The set includes: 6 sets of jaws for standard hoses and those with reduced outer diameter, grease, plastic caliper, case.