Is the Hex bolt for DIN 3015 double clamp available in different lengths and thread sizes for external metric threads?

Yes. The Hex bolt for DIN 3015 double clamp Format with external metric thread is available in different lengths and thread sizes. Made of galvanized carbon steel, these bolts are produced to fit the DIN 3015 complete type 301 double clamp and are offered in a range of standard external metric thread diameters and corresponding lengths to accommodate various pipe diameters and clamp thicknesses. For exact available thread sizes (e.g., M6, M8, M10, etc.) and specific lengths, consult the supplierâs catalog or technical sheet for Format, as offerings can vary by manufacturer and stock.

Does the Hex bolt for DIN 3015 double clamp meet corrosion resistance standards after galvanization?

Hex bolt for DIN 3015 double clamp Format made of carbon steel and galvanized will have improved corrosion resistance compared with plain carbon steel, because galvanization (zinc coating) provides a sacrificial barrier against rust. However, whether it âmeets corrosion resistance standardsâ depends on which standard and the required performance (e.g., ISO, ASTM, or specific salt spray hours). Typical electrogalvanized or hot-dip galvanized coatings differ markedly: hot-dip gives thicker, longer-lasting protection than electrogalvanizing. Without specification of the galvanizing method, coating thickness, and applicable standard (e.g., ISO 1461, ASTM A153, or required NSS hours), compliance cannot be guaranteed. For confirmation, request coating type and thickness or supplier test certificates showing the Hex bolt for DIN 3015 double clamp Format meets the specific corrosion standard you require.

Can the Hex bolt for DIN 3015 double clamp be used with stainless steel clamps or only carbon steel clamps?

Hex bolt for DIN 3015 double clamp Format. based on the provided description (Material: carbon steel, galvanized), the bolt as supplied is carbon steel with a zinc coating. This means: - Compatibility: Mechanically, the Hex bolt for DIN 3015 double clamp Format can be used to fasten either carbon steel clamps or stainless steel clamps, provided the bolt dimensions and thread match the clamp design. - Corrosion concern: Combining galvanized carbon steel bolts with stainless steel clamps risks galvanic corrosion in certain environments (especially in presence of moisture, salts or aggressive chemicals). Contact between dissimilar metals can accelerate corrosion of the less noble metal (typically the zinc coating or underlying steel). - Recommended practice: For stainless steel clamps, use stainless steel bolts (e.g., A2/A4) to ensure material compatibility and long-term corrosion resistance. If using the carbon steel galvanized Hex bolt for DIN 3015 double clamp Format with stainless clamps, ensure the environment is dry and non-corrosive, or apply appropriate isolation (e.g., non-conductive washers/coatings) and monitor for corrosion. - Summary: Technically usable, but not ideal. prefer stainless steel bolts for stainless steel clamps to avoid galvanic corrosion and ensure durability.

Hex bolt for DIN 3015 double clamp

All products, Clamps for hydraulic pipes/

Additional information

Hexagon head screw for double clamp DIN 3015 complete type 301 with external metric thread. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-ADVTE-1	M6x35 screw, double washer grade 1 (hexagonal)	-	-	In stock	Enquiry
TC-ADVTE-2	M8x35 screw, double washer grade 2 (hexagonal)	-	-	In stock	Enquiry
TC-ADVTE-3	M8x45 screw, double washer grade 3 (hexagonal)	-	-	In stock	Enquiry
TC-ADVTE-4	M8x50 screw, double thread grade 4 (hexagonal)	-	-	In stock	Enquiry
TC-ADVTE-5	M8x60 screw, double washer grade 5 (hexagonal)	-	-	In stock	Enquiry